Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Trifunctional Electrode Additive for High Active Material Content and Volumetric Lithium‐Ion Electrode Densities

Trifunctional Electrode Additive for High Active Material Content and Volumetric Lithium‐Ion... The use of electrode additives such as binder and conductive additive (CA) in addition to high pore volume for electrolytes, results in reduced volumetric energy densities of all battery electrodes. In this work, it is proposed to use poly(furfuryl alcohol) (PFA) conductive resin as a trifunctional electrode additive to replace polyvinylidene fluoride (PVDF) and CA while simultaneously enabling low porosity electrode function. The resultant PFA binder has a long‐range ordered structure of conjugated diene, which allow electronic conductivity that leads to a CA‐free electrode fabrication process. The oxygen heteroatoms in the PFA structure reduce the diffusion barriers of lithium ions, lowers the amount of required electrolyte/pore volume and thus, increasing electrode density. Serving as a trifunctional electrode additive, a high electrode density of 2.65 g cm−3 of the LiFePO4 (LFP) electrode and therefore the highest volumetric energy density of 1551 Wh L−1 so far. The LFP electrode using PFA binder can achieve a capacity retention of ≈80% and Coulombic efficiency of over 99.9% after cycling for 500 times. The proposed in situ polymerization strategy could revolutionize the electrode process, with the advantages of being simple, environmentally friendly, and easily scalable to industrial applications. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Energy Materials Wiley

Trifunctional Electrode Additive for High Active Material Content and Volumetric Lithium‐Ion Electrode Densities

Loading next page...
 
/lp/wiley/trifunctional-electrode-additive-for-high-active-material-content-and-Hs9QsaWB6N

References (44)

Publisher
Wiley
Copyright
"© 2019 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim"
ISSN
1614-6832
eISSN
1614-6840
DOI
10.1002/aenm.201803390
Publisher site
See Article on Publisher Site

Abstract

The use of electrode additives such as binder and conductive additive (CA) in addition to high pore volume for electrolytes, results in reduced volumetric energy densities of all battery electrodes. In this work, it is proposed to use poly(furfuryl alcohol) (PFA) conductive resin as a trifunctional electrode additive to replace polyvinylidene fluoride (PVDF) and CA while simultaneously enabling low porosity electrode function. The resultant PFA binder has a long‐range ordered structure of conjugated diene, which allow electronic conductivity that leads to a CA‐free electrode fabrication process. The oxygen heteroatoms in the PFA structure reduce the diffusion barriers of lithium ions, lowers the amount of required electrolyte/pore volume and thus, increasing electrode density. Serving as a trifunctional electrode additive, a high electrode density of 2.65 g cm−3 of the LiFePO4 (LFP) electrode and therefore the highest volumetric energy density of 1551 Wh L−1 so far. The LFP electrode using PFA binder can achieve a capacity retention of ≈80% and Coulombic efficiency of over 99.9% after cycling for 500 times. The proposed in situ polymerization strategy could revolutionize the electrode process, with the advantages of being simple, environmentally friendly, and easily scalable to industrial applications.

Journal

Advanced Energy MaterialsWiley

Published: Mar 1, 2019

Keywords: ; ; ; ;

There are no references for this article.