Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Tests on ferritic stainless steel simply supported and continuous SHS and RHS beams

Tests on ferritic stainless steel simply supported and continuous SHS and RHS beams Development of efficient design guidance for stainless steel structures (considering non‐linear behaviour, strain hardening and allowing for moment redistribution in indeterminate structures) is crucial for the widespread use of this corrosion‐resistant material. This paper presents an experimental programme involving ferritic stainless steel simply supported and continuous beams (RHS and SHS) and the assessment of existing cross‐sectional classifications and different plastic design methods available in the literature for indeterminate stainless steel structures, not currently allowed in stainless steel standards. The analysis indicated that some cross‐sectional classification limits seem to be too optimistic for ferritic stainless steels and further research is needed in order to extend plastic design to these grades. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Steel Construction: Design and Research Wiley

Tests on ferritic stainless steel simply supported and continuous SHS and RHS beams

Loading next page...
 
/lp/wiley/tests-on-ferritic-stainless-steel-simply-supported-and-continuous-shs-bsROW859SL
Publisher
Wiley
Copyright
"Copyright © 2016 Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin"
ISSN
1867-0520
eISSN
1867-0539
DOI
10.1002/stco.201610033
Publisher site
See Article on Publisher Site

Abstract

Development of efficient design guidance for stainless steel structures (considering non‐linear behaviour, strain hardening and allowing for moment redistribution in indeterminate structures) is crucial for the widespread use of this corrosion‐resistant material. This paper presents an experimental programme involving ferritic stainless steel simply supported and continuous beams (RHS and SHS) and the assessment of existing cross‐sectional classifications and different plastic design methods available in the literature for indeterminate stainless steel structures, not currently allowed in stainless steel standards. The analysis indicated that some cross‐sectional classification limits seem to be too optimistic for ferritic stainless steels and further research is needed in order to extend plastic design to these grades.

Journal

Steel Construction: Design and ResearchWiley

Published: Nov 1, 2016

Keywords: ; ; ; ; ;

References