Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Tailored TiO2 Protection Layer Enabled Efficient and Stable Microdome Structured p‐GaAs Photoelectrochemical Cathodes

Tailored TiO2 Protection Layer Enabled Efficient and Stable Microdome Structured p‐GaAs... Group III–V compound semiconductors are a promising group of materials for photoelectrochemical (PEC) applications. In this work, a metal assisted wet etching approach is adapted to acquiring a large‐area patterned microdome structure on p‐GaAs surface. In addition, atomic layer deposition is used to deposit a TiO2 protection layer with controlled thickness and crystallinity. Based on a PEC photocathode design, the optimal configuration achieves a photocurrent of −5 mA cm−2 under −0.8 V versus Ag/AgCl in a neutral pH electrolyte. The TiO2 coating with a particular degree of crystallization deposited via controlled temperature demonstrates a superior stability over amorphous coating, enabling a remarkably stable operation, for as long as 60 h. The enhanced charge separation induced by favorable band alignment between GaAs and TiO2 contributes simultaneously to the elevated solar conversion efficiency. This approach provides a promising solution to further development of group III–V compounds and other photoelectrodes with high efficiency and excellent durability for solar fuel generation. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Energy Materials Wiley

Tailored TiO2 Protection Layer Enabled Efficient and Stable Microdome Structured p‐GaAs Photoelectrochemical Cathodes

Loading next page...
 
/lp/wiley/tailored-tio2-protection-layer-enabled-efficient-and-stable-microdome-0Pn76MJUh1

References (34)

Publisher
Wiley
Copyright
© 2020 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim
ISSN
1614-6832
eISSN
1614-6840
DOI
10.1002/aenm.201902985
Publisher site
See Article on Publisher Site

Abstract

Group III–V compound semiconductors are a promising group of materials for photoelectrochemical (PEC) applications. In this work, a metal assisted wet etching approach is adapted to acquiring a large‐area patterned microdome structure on p‐GaAs surface. In addition, atomic layer deposition is used to deposit a TiO2 protection layer with controlled thickness and crystallinity. Based on a PEC photocathode design, the optimal configuration achieves a photocurrent of −5 mA cm−2 under −0.8 V versus Ag/AgCl in a neutral pH electrolyte. The TiO2 coating with a particular degree of crystallization deposited via controlled temperature demonstrates a superior stability over amorphous coating, enabling a remarkably stable operation, for as long as 60 h. The enhanced charge separation induced by favorable band alignment between GaAs and TiO2 contributes simultaneously to the elevated solar conversion efficiency. This approach provides a promising solution to further development of group III–V compounds and other photoelectrodes with high efficiency and excellent durability for solar fuel generation.

Journal

Advanced Energy MaterialsWiley

Published: Mar 1, 2020

Keywords: ; ; ; ;

There are no references for this article.