Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Role of Ionic Functional Groups on Ion Transport at Perovskite Interfaces

Role of Ionic Functional Groups on Ion Transport at Perovskite Interfaces Hybrid organic/inorganic perovskite solar cells are invigorating the photovoltaic community due to their remarkable properties and efficiency. However, many perovskite solar cells show an undesirable current–voltage (I–V) hysteresis in their forward and reverse voltage scans, working to the detriment of device characterization and performance. This hysteresis likely arises from slow ion migration in the bulk perovskite active layer to interfaces which may induce charge trapping. It is shown that interfacial chemistry between the perovskite and charge transport layer plays a critical role in ion transport and I–V hysteresis in perovskite‐based devices. Specifically, phenylene vinylene polymers containing cationic, zwitterionic, or anionic pendent groups are utilized to fabricate charge transport layers with specific interfacial ionic functionalities. The interfacial‐adsorbing boundary induced by the zwitterionic polymer in contact with the perovskite increases the local ion concentration, which is responsible for the observed I–V hysteresis. Moreover, the ion adsorbing properties of this interface are exploited for perovskite‐based memristors. This fundamental study of I–V hysteresis in perovskite‐based devices introduces a new mechanism for inducing memristor behavior by interfacial ion adsorption. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Energy Materials Wiley

Loading next page...
 
/lp/wiley/role-of-ionic-functional-groups-on-ion-transport-at-perovskite-vVq5xPVFgm

References (75)

Publisher
Wiley
Copyright
© 2017 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim
ISSN
1614-6832
eISSN
1614-6840
DOI
10.1002/aenm.201701235
Publisher site
See Article on Publisher Site

Abstract

Hybrid organic/inorganic perovskite solar cells are invigorating the photovoltaic community due to their remarkable properties and efficiency. However, many perovskite solar cells show an undesirable current–voltage (I–V) hysteresis in their forward and reverse voltage scans, working to the detriment of device characterization and performance. This hysteresis likely arises from slow ion migration in the bulk perovskite active layer to interfaces which may induce charge trapping. It is shown that interfacial chemistry between the perovskite and charge transport layer plays a critical role in ion transport and I–V hysteresis in perovskite‐based devices. Specifically, phenylene vinylene polymers containing cationic, zwitterionic, or anionic pendent groups are utilized to fabricate charge transport layers with specific interfacial ionic functionalities. The interfacial‐adsorbing boundary induced by the zwitterionic polymer in contact with the perovskite increases the local ion concentration, which is responsible for the observed I–V hysteresis. Moreover, the ion adsorbing properties of this interface are exploited for perovskite‐based memristors. This fundamental study of I–V hysteresis in perovskite‐based devices introduces a new mechanism for inducing memristor behavior by interfacial ion adsorption.

Journal

Advanced Energy MaterialsWiley

Published: Jan 1, 2017

Keywords: ; ; ; ;

There are no references for this article.