Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Hard and Soft Acid and Base (HSAB) Engineering for Efficient and Stable Sn‐Pb Perovskite Solar Cells

Hard and Soft Acid and Base (HSAB) Engineering for Efficient and Stable Sn‐Pb Perovskite Solar Cells Regulation of Lewis acid‐base adduct intermediate is more critical for the dual metal ions of Sn2+ and Pb2+ than for the single metal ion such as Pb2+ in preparing high quality perovskite films. It has been reported here that the photovoltaic performance of Sn‐Pb alloyed perovskite solar cells is dependent on the interaction between metal ions and Lewis base additives. Urea and thiourea are selected as an O‐ and a S‐donor, respectively, which is used as an additive in the precursor solution including equimolar SnI2 and PbI2 together with organic iodides of formamidinium iodide and methylammonium iodide, forming a nominal composition of FA0.5MA0.5Pb0.5Sn0.5I3. Open‐circuit voltage (Voc) is increased while maintaining short‐circuit photocurrent density (Jsc) after the addition of urea. On the other hand, both Jsc and Voc are simultaneously increased by adding thiourea, leading to a considerable increase in power conversion efficiency from 14.58% (control) to 18.59%. A strong interaction between the relatively soft Sn2+, compared to Sn4+, and the soft sulfur in thiourea, associated with hard and soft acid and base theory, suppresses effectively a disproportionation reaction of 2Sn2+→ Sn4+ + Sn0, which results in a substantial enhancement of carrier lifetime and consequently photovoltaic performance. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Energy Materials Wiley

Hard and Soft Acid and Base (HSAB) Engineering for Efficient and Stable Sn‐Pb Perovskite Solar Cells

Download PDF
10 pages

Loading next page...
 
/lp/wiley/hard-and-soft-acid-and-base-hsab-engineering-for-efficient-and-stable-0EkuWeU826

References (42)

Publisher
Wiley
Copyright
© 2022 Wiley‐VCH GmbH
ISSN
1614-6832
eISSN
1614-6840
DOI
10.1002/aenm.202202496
Publisher site
See Article on Publisher Site

Abstract

Regulation of Lewis acid‐base adduct intermediate is more critical for the dual metal ions of Sn2+ and Pb2+ than for the single metal ion such as Pb2+ in preparing high quality perovskite films. It has been reported here that the photovoltaic performance of Sn‐Pb alloyed perovskite solar cells is dependent on the interaction between metal ions and Lewis base additives. Urea and thiourea are selected as an O‐ and a S‐donor, respectively, which is used as an additive in the precursor solution including equimolar SnI2 and PbI2 together with organic iodides of formamidinium iodide and methylammonium iodide, forming a nominal composition of FA0.5MA0.5Pb0.5Sn0.5I3. Open‐circuit voltage (Voc) is increased while maintaining short‐circuit photocurrent density (Jsc) after the addition of urea. On the other hand, both Jsc and Voc are simultaneously increased by adding thiourea, leading to a considerable increase in power conversion efficiency from 14.58% (control) to 18.59%. A strong interaction between the relatively soft Sn2+, compared to Sn4+, and the soft sulfur in thiourea, associated with hard and soft acid and base theory, suppresses effectively a disproportionation reaction of 2Sn2+→ Sn4+ + Sn0, which results in a substantial enhancement of carrier lifetime and consequently photovoltaic performance.

Journal

Advanced Energy Materials – Wiley

Published: Dec 1, 2022

Keywords: adducts; HSAB; perovskite solar cells; Sn‐Pb alloyed solar cells; thiourea; urea

There are no references for this article.