Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Experimental Characterization of Microfabricated Thermoelectric Energy Harvesters for Smart Sensor and Wearable Applications

Experimental Characterization of Microfabricated Thermoelectric Energy Harvesters for Smart... Microfabricated thermoelectric generators (µTEGs) are excellent candidates for sustainable power delivery for the next generation of smart sensors and wearable devices through harvesting of waste heat. However, the assembly process and inherently small contact areas for thermal and electrical transport introduce losses which can significantly reduce the effective figure of merit ZT. Further, the form factor of µTEGs makes these losses extremely challenging to quantify. The relative contributions of the thermoelectric film and interfaces greatly impact the choice of materials, device geometry, and maximum power point operation. A comprehensive study of µTEG devices including microfabrication, detailed modeling and optimization, and electrical, structural, and thermal characterization of modules and their constituent films is presented. Using a combination of novel infrared microscopy and thin‐film characterization techniques, the average thermoelectric material properties and the power output as a function of the true temperature difference across the device are isolated. Power outputs as high as 1 mW for a µTEG with 13.8 mm2 footprint and device ΔT of 7.3 K are measured. An order of magnitude reduction in figure of merit for the devices (ZT ≈ 0.03) compared to the constituent thermoelectric films (zT ≈ 0.3), with implications for the selection of maximum power point operation, is demonstrated. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Materials Technologies Wiley

Experimental Characterization of Microfabricated Thermoelectric Energy Harvesters for Smart Sensor and Wearable Applications

Download PDF
12 pages

Loading next page...
 
/lp/wiley/experimental-characterization-of-microfabricated-thermoelectric-energy-Tz9bxMKNq8

References (32)

Publisher
Wiley
Copyright
© 2018 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim
eISSN
2365-709X
DOI
10.1002/admt.201700383
Publisher site
See Article on Publisher Site

Abstract

Microfabricated thermoelectric generators (µTEGs) are excellent candidates for sustainable power delivery for the next generation of smart sensors and wearable devices through harvesting of waste heat. However, the assembly process and inherently small contact areas for thermal and electrical transport introduce losses which can significantly reduce the effective figure of merit ZT. Further, the form factor of µTEGs makes these losses extremely challenging to quantify. The relative contributions of the thermoelectric film and interfaces greatly impact the choice of materials, device geometry, and maximum power point operation. A comprehensive study of µTEG devices including microfabrication, detailed modeling and optimization, and electrical, structural, and thermal characterization of modules and their constituent films is presented. Using a combination of novel infrared microscopy and thin‐film characterization techniques, the average thermoelectric material properties and the power output as a function of the true temperature difference across the device are isolated. Power outputs as high as 1 mW for a µTEG with 13.8 mm2 footprint and device ΔT of 7.3 K are measured. An order of magnitude reduction in figure of merit for the devices (ZT ≈ 0.03) compared to the constituent thermoelectric films (zT ≈ 0.3), with implications for the selection of maximum power point operation, is demonstrated.

Journal

Advanced Materials Technologies – Wiley

Published: Jun 1, 2018

Keywords: ; ; ; ;

There are no references for this article.