Access the full text.
Sign up today, get DeepDyve free for 14 days.
References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.
ECCS news/News/Announcements multi-storey buildings. The investiga- Design of Steel Structures – tions in this project were therefore Announcements 2nd edition con- ducted with a technical-architec- tural focus, which enhances the devel- opment of envelope systems for office The First Conference on Civil and multi-storey buildings towards an Engineering – Sudan architecturally high quality and so- cio-cultural acceptance. Location and date: The common use of the tongue and Merowe, Sudan, 13-15 December 2016 groove technique for industrial con- structions alongside of the elements, al- Information and registration: lows optimized building physics and an http://merowe.edu.sd/en/cce2016/ economic impact on the execution of the longitudinal edge of the elements. For technical reasons, the transverse ECCS Eurocode Design Manuals International Conference on Architec- edges with continuous production of the ture and Civil Engineering 2017 This book describes the fundamental elements are not profiled. This requires concepts of Eurocode 3, Part 1-1: “Gen- a different execution of longitudinal and Location and Date: eral rules and rules for buildings and transverse joints and the provision of a Singapore, Singapore, their practical application”. Following a horizontal or vertical arrangement of 10–12 March 2017 discussion of the Eurocode 3 basis of the elements. Through this, general con- design, including the principles of relia- ditions for the architectural conceptual- Information and registration: bility management and the limit state ization are dictated by the construction. http://icace.coreconferences.com/index. html The “adapter solution”, developed in approach, the steel material standards the present re- search project, now al- and their use according to Eurocode 3 are given in detail. Structural analysis lows a visually equivalent joint design International Conference on Wind and modelling are presented in a chap- and the combination of horizontal and Energy Harvesting 2017 (WINER- ter that will assist the design engineer in vertical installed sandwich elements in a COST’17) the first stages of design. This is fol- façade. Coincidently, larger window ar- lowed by a key chapter that provides the eas can be integrated into the façades Location and Date: design criteria and approaches for the and existing element formats can be cus- Coimbra, Portugal, various types of structural members. The tomized to conventional grid dimen- 20 and 21 April 2017 theoretical basis and checking proce- sions of office buildings. The structurally dures are closely tied to the Eurocode affordable, all-side line support of ele- Information and registration: requirements, thus ensuring a unique ments optimizes the load transfer and www.cmm.pt/WINERCOST17 presentation of theory transferred into the fixing of the construction. Since ex- practice. The subsequent chapters ex- isting panel formats will further be used pand on the principles behind and ap- for this solution, a cost-intensive conver- International Conference on Building plications of the elastic and plastic de- sion of the production of sandwich pan- Envelope Systems and Technologies els is dispensable. sign of steel structures. Throughout the The research project (IGF-Nr. book, the many design examples pre- Location and date: sented account for a significant part of 16586 N) was carried out at Technis- Istanbul, Turkey, the manual. These examples will facili- che Universität Dortmund at Lehrstuhl 15–18 May 2017 tate the acceptance of the code and en- Stahlbau and at Ryerson University To- sure a smooth transition from earlier na- ronto at Department of Architectural Information and registration: http://icbestistanbul.com/ tional codes to the Eurocode. This 2nd Science. FOSTA has accompanied the edition, written by Luís Simões da Silva, research project work and has organ- Rui Simões and Helena Gervásio, incor- ized the project funding from the Fed- Eurosteel 2017 porates new material on the torsion of eral Ministry of Economics and Tech- steel members and additional design ex- nology through the AiF as part of the Location and date: amples. programme for promoting industrial Copenhagen, Denmark, cooperation research (IGF) in accord- 13−15 September 2017 ance with a resolution of the German parliament. News Information and registration: The final report (DIN A4) contains www.steelconstruct.com 269 pages with 314 figures and 56 ta- bles. Fee: € 65.00 incl. VAT plus mailing Developing a high quality sandwich- expenses; ISBN 978-3-942541-71-8 panel envelope-system for office and 39th IABSE Symposium multi-storey buildings (P 977) Engineering the Future Dr. Gregor Nüsse Within the framework of the present Location and date: research project, the basics of an archi- Vancouver, Canada, tecturally appealing prefabricated sys- 21–23 September 2017 tem for facades considering sandwich panels with a new mounting technology Information and registration: www.iabse.org were developed. Occasion is the fact that sandwich constructions show fur- ther potential especially concerning 372 Steel Construction 9 (2016), No. 4
Steel Construction: Design and Research – Wiley
Published: Nov 1, 2016
You can share this free article with as many people as you like with the url below! We hope you enjoy this feature!
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.