Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Design and execution of bearing type shear connections with blind rivets in steel construction

Design and execution of bearing type shear connections with blind rivets in steel construction Editor’ S rEC o MME ndation S This paper has been published in Stahl- mainly the advantages over the classic shear bearing resistance and the fatigue bau 4/2020 in German. joining technologies. Blind rivets are used strength of blind rivets and blind rivet wherever classic joining technologies, connections are presented. The aim of Abstract: With the development of blind such as welding or screwing are not ap- the investigations was to extend the exist- rivets with a nominal diameter of d > 6.4 plicable or uneconomical for technologi- ing design and execution rules in steel mm accompanies with an increasing ten- cal or structural reasons. Unfortunately, construction according to the DIN EN dency for use in steel construction. Rea- there are no adequate normative guide- 1993 and DIN EN 1090 to blind rivet sons for the extended application are lines for the design and execution of connections in order to allow a purely blind rivet connec- analytical proof of bearing type connec- tions in accordance tions in future. Furthermore, it was a with DIN EN 1993-1- matter to define detail categories in ac- 8, DIN EN 1993-1-9 cordance with DIN EN 1993-1-9 for the and DIN EN 1090-2. different types of blind rivets and connec- Because of these ap- tion with blind rivets, in order to enable provals (ETA, abZ/ the fatigue strength verification based on aBG, ZiE) must be the model of Eurocode 3. used for applications Kalkowsky, F.; Glienke, R.; Blunk, C.; regulated by the Dörre, M.; Henkel, K.-M. (2020) Zur Be- building authorities. messung von Scher-/Lochleibungsverbin- dungen mit Blindnieten im Stahlbau in: In this article, the re- Stahlbau 89, No. 4, pp. 304-325. sults of systematic in- Force-displacement-diagram and failure pictures for the tests of https://doi.org/10.1002/stab.202000002 VK Ie vestigations on the Steel Construction 13 (2020), No. 2 113 http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Steel Construction: Design and Research Wiley

Design and execution of bearing type shear connections with blind rivets in steel construction

Steel Construction: Design and Research , Volume 13 (2) – May 1, 2020

Loading next page...
 
/lp/wiley/design-and-execution-of-bearing-type-shear-connections-with-blind-CYJ0OoDwim
Publisher
Wiley
Copyright
© 2020 Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin
ISSN
1867-0520
eISSN
1867-0539
DOI
10.1002/stco.202070205
Publisher site
See Article on Publisher Site

Abstract

Editor’ S rEC o MME ndation S This paper has been published in Stahl- mainly the advantages over the classic shear bearing resistance and the fatigue bau 4/2020 in German. joining technologies. Blind rivets are used strength of blind rivets and blind rivet wherever classic joining technologies, connections are presented. The aim of Abstract: With the development of blind such as welding or screwing are not ap- the investigations was to extend the exist- rivets with a nominal diameter of d > 6.4 plicable or uneconomical for technologi- ing design and execution rules in steel mm accompanies with an increasing ten- cal or structural reasons. Unfortunately, construction according to the DIN EN dency for use in steel construction. Rea- there are no adequate normative guide- 1993 and DIN EN 1090 to blind rivet sons for the extended application are lines for the design and execution of connections in order to allow a purely blind rivet connec- analytical proof of bearing type connec- tions in accordance tions in future. Furthermore, it was a with DIN EN 1993-1- matter to define detail categories in ac- 8, DIN EN 1993-1-9 cordance with DIN EN 1993-1-9 for the and DIN EN 1090-2. different types of blind rivets and connec- Because of these ap- tion with blind rivets, in order to enable provals (ETA, abZ/ the fatigue strength verification based on aBG, ZiE) must be the model of Eurocode 3. used for applications Kalkowsky, F.; Glienke, R.; Blunk, C.; regulated by the Dörre, M.; Henkel, K.-M. (2020) Zur Be- building authorities. messung von Scher-/Lochleibungsverbin- dungen mit Blindnieten im Stahlbau in: In this article, the re- Stahlbau 89, No. 4, pp. 304-325. sults of systematic in- Force-displacement-diagram and failure pictures for the tests of https://doi.org/10.1002/stab.202000002 VK Ie vestigations on the Steel Construction 13 (2020), No. 2 113

Journal

Steel Construction: Design and ResearchWiley

Published: May 1, 2020

There are no references for this article.