Access the full text.
Sign up today, get DeepDyve free for 14 days.
Jing Li, L. Downie, Lin Ma, W. Qiu, J. Dahn (2015)
Study of the Failure Mechanisms of LiNi0.8Mn0.1Co0.1O2 Cathode Material for Lithium Ion BatteriesJournal of The Electrochemical Society, 162
T. Sasaki, T. Nonaka, H. Oka, C. Okuda, Yuichi Itou, Y. Kondo, Yoji Takeuchi, Y. Ukyo, K. Tatsumi, S. Muto (2009)
Capacity-Fading Mechanisms of LiNiO2-Based Lithium-Ion Batteries I. Analysis by Electrochemical and Spectroscopic ExaminationJournal of The Electrochemical Society, 156
D. Ko, Jun-Ho Park, Sungjun Park, Yong-nam Ham, Sungjin Ahn, Jinhwan Park, H. Han, Eunha Lee, W. Jeon, C. Jung (2019)
Microstructural visualization of compositional changes induced by transition metal dissolution in Ni-rich layered cathode materials by high-resolution particle analysisNano Energy
D. Jang, Youngjoon Shin, Seung Oh (1996)
Dissolution of Spinel Oxides and Capacity Losses in 4 V Li / Li x Mn2 O 4 CellsJournal of The Electrochemical Society, 143
D. Cho, Chang-Heum Jo, Woosuk Cho, Young‐Jun Kim, H. Yashiro, Yang‐Kook Sun, Seung‐Taek Myung (2014)
Effect of Residual Lithium Compounds on Layer Ni-Rich Li[Ni0.7Mn0.3]O2Journal of The Electrochemical Society, 161
Xunhui Xiong, Zhixing Wang, Guochun Yan, Huajun Guo, Xinhai Li (2014)
Role of V2O5 coating on LiNiO2-based materials for lithium ion batteryJournal of Power Sources, 245
Un-Hyuck Kim, Eungje Lee, C. Yoon, Seung‐Taek Myung, Yang‐Kook Sun (2016)
Compositionally Graded Cathode Material with Long‐Term Cycling Stability for Electric Vehicles ApplicationAdvanced Energy Materials, 6
A. Ueda, T. Ohzuku (1994)
Solid‐State Redox Reactions of LiNi1 / 2Co1 / 2 O 2 ( R 3̄m ) for 4 Volt Secondary Lithium CellsJournal of The Electrochemical Society, 141
Hyejung Kim, Min Kim, H. Jeong, H. Nam, Jaephil Cho (2015)
A new coating method for alleviating surface degradation of LiNi0.6Co0.2Mn0.2O2 cathode material: nanoscale surface treatment of primary particles.Nano letters, 15 3
Un-Hyuck Kim, Do-Wook Jun, Kang‐Joon Park, Qian Zhang, P. Kaghazchi, D. Aurbach, Dan Major, G. Goobes, M. Dixit, N. Leifer, Chongmin Wang, P. Yan, Docheon Ahn, Kwang Kim, Chong Yoon, Yang‐Kook Sun (2018)
Pushing the limit of layered transition metal oxide cathodes for high-energy density rechargeable Li ion batteriesEnergy and Environmental Science, 11
Hongtao Sun, K. Zhao (2017)
Electronic Structure and Comparative Properties of LiNixMnyCozO2 Cathode MaterialsJournal of Physical Chemistry C, 121
L. Laffont, P. Gibot (2010)
High resolution electron energy loss spectroscopy of manganese oxides: Application to Mn3O4 nanoparticlesMaterials Characterization, 61
Hideyuki Kanda, M. Yoshiya, F. Oba, K. Ogasawara, H. Adachi, I. Tanaka (1998)
CLUSTER CALCULATION OF OXYGEN K-EDGE ELECTRON-ENERGY-LOSS NEAR-EDGE STRUCTURE OF NIOPhysical Review B, 58
A. Manthiram, Bohang Song, Wangda Li (2017)
A perspective on nickel-rich layered oxide cathodes for lithium-ion batteriesEnergy Storage Materials, 6
Seung-Yong Lee, G. Park, C. Jung, D. Ko, SeongYoung Park, Hee-Goo Kim, Seong‐Hyeon Hong, Yimei Zhu, Miyoung Kim (2019)
Revisiting Primary Particles in Layered Lithium Transition‐Metal Oxides and Their Impact on Structural DegradationAdvanced Science, 6
P. Yan, Jianming Zheng, M. Gu, Jie Xiao, Ji‐Guang Zhang, Chong-Min Wang (2017)
Intragranular cracking as a critical barrier for high-voltage usage of layer-structured cathode for lithium-ion batteriesNature Communications, 8
Jason Graetz, C. Ahn, Ouyang Hao, P. Rez, B. Fultz (2004)
White lines and d-band occupancy for the 3d transition-metal oxides and lithium transition-metal oxidesPhysical Review B, 69
Shoichiro Watanabe, M. Kinoshita, T. Hosokawa, K. Morigaki, K. Nakura (2014)
Capacity fade of LiAlyNi1−x−yCoxO2 cathode for lithium-ion batteries during accelerated calendar and cycle life tests (surface analysis of LiAlyNi1−x−yCoxO2 cathode after cycle tests in restricted depth of discharge ranges)Journal of Power Sources, 258
D. Abraham, R. Twesten, M. Balasubramanian, I. Petrov, J. Mcbreen, K. Amine (2002)
Surface changes on LiNi0.8Co0.2O2 particles during testing of high-power lithium-ion cellsElectrochemistry Communications, 4
J. Wandt, Anna Freiberg, Alexander Ogrodnik, H. Gasteiger (2018)
Singlet oxygen evolution from layered transition metal oxide cathode materials and its implications for lithium-ion batteriesMaterials Today
Junhyeok Kim, H. Ma, Hyungyeon Cha, Hyomyung Lee, Jaekyung Sung, M. Seo, Pilgun Oh, Minjoon Park, Jaephil Cho (2018)
A highly stabilized nickel-rich cathode material by nanoscale epitaxy control for high-energy lithium-ion batteriesEnergy and Environmental Science, 11
A. Kondrakov, A. Schmidt, Jin Xu, H. Geßwein, R. Mönig, P. Hartmann, H. Sommer, T. Brezesinski, J. Janek (2017)
Anisotropic Lattice Strain and Mechanical Degradation of High- and Low-Nickel NCM Cathode Materials for Li-Ion BatteriesJournal of Physical Chemistry C, 121
Seung‐Taek Myung, F. Maglia, Kang‐Joon Park, C. Yoon, P. Lamp, Kim Sung-jin, Yang‐Kook Sun (2017)
Nickel-Rich Layered Cathode Materials for Automotive Lithium-Ion Batteries: Achievements and PerspectivesACS energy letters, 2
D. Andre, Kim Sung-jin, P. Lamp, S. Lux, F. Maglia, O. Paschos, Barbara Stiaszny (2015)
Future generations of cathode materials: an automotive industry perspectiveJournal of Materials Chemistry, 3
学霸图书馆(www.xuebalib.com)是一个"整合众多图书馆数据库资源,
Hohyun Sun, A. Manthiram (2017)
Impact of Microcrack Generation and Surface Degradation on a Nickel-Rich Layered Li[Ni0.9Co0.05Mn0.05]O2 Cathode for Lithium-Ion BatteriesChemistry of Materials, 29
James Gilbert, I. Shkrob, D. Abraham (2017)
Transition Metal Dissolution, Ion Migration, Electrocatalytic Reduction and Capacity Loss in Lithium-Ion Full CellsJournal of The Electrochemical Society, 164
C. Yoon, M. Choi, Byung-Beom Lim, Eungje Lee, Yang‐Kook Sun (2015)
Review—High-Capacity Li[Ni1-xCox/2Mnx/2]O2 (x = 0.1, 0.05, 0) Cathodes for Next-Generation Li-Ion BatteryJournal of The Electrochemical Society, 162
Wangda Li, Xiaoming Liu, H. Celio, Patrick Smith, A. Dolocan, M. Chi, A. Manthiram (2018)
Mn versus Al in Layered Oxide Cathodes in Lithium‐Ion Batteries: A Comprehensive Evaluation on Long‐Term CyclabilityAdvanced Energy Materials, 8
I. Belharouak, Wenquan Lu, D. Vissers, K. Amine (2006)
Safety characteristics of Li(Ni0.8Co0.15Al0.05)O2 and Li(Ni1/3Co1/3Mn1/3)O2Electrochemistry Communications, 8
A. Manthiram, James Knight, Seung‐Taek Myung, Seung Oh, Yang‐Kook Sun (2016)
Nickel‐Rich and Lithium‐Rich Layered Oxide Cathodes: Progress and PerspectivesAdvanced Energy Materials, 6
V. Dusastre (2010)
Materials for sustainable energy : a collection of peer-reviewed research and review articles from Nature Publishing Group
Y. Koyama, T. Mizoguchi, H. Ikeno, I. Tanaka (2005)
Electronic structure of lithium nickel oxides by electron energy loss spectroscopy.The journal of physical chemistry. B, 109 21
R. Hausbrand, G. Cherkashinin, H. Ehrenberg, M. Gröting, K. Albe, C. Hess, W. Jaegermann (2015)
Fundamental degradation mechanisms of layered oxide Li-ion battery cathode materials: Methodology, insights and novel approachesMaterials Science and Engineering B-advanced Functional Solid-state Materials, 192
W. Li, J. Reimers, J. Dahn (1993)
In situ x-ray diffraction and electrochemical studies of Li1−xNiO2Solid State Ionics, 67
D. Abraham, R. Twesten, M. Balasubramanian, J. Kropf, D. Fischer, J. Mcbreen, I. Petrov, K. Amine (2003)
Microscopy and Spectroscopy of Lithium Nickel Oxide-Based Particles Used in High Power Lithium-Ion CellsJournal of The Electrochemical Society, 150
Roland Jung, M. Metzger, F. Maglia, C. Stinner, H. Gasteiger (2017)
Oxygen Release and Its Effect on the Cycling Stability of LiNixMnyCozO2 (NMC) Cathode Materials for Li-Ion BatteriesJournal of The Electrochemical Society, 164
Cuixia Cheng, Long Tan, Haowen Liu, Xintang Huang (2011)
High rate performances of the cathode material LiNi1/3Co1/3Mn1/3O2 synthesized using low temperature hydroxide precipitationMaterials Research Bulletin, 46
H. Ryu, Kang‐Joon Park, C. Yoon, Yang‐Kook Sun (2018)
Capacity Fading of Ni-Rich Li[NixCoyMn1–x–y]O2 (0.6 ≤ x ≤ 0.95) Cathodes for High-Energy-Density Lithium-Ion Batteries: Bulk or Surface Degradation?Chemistry of Materials, 30
Hyang-Rim Kim, S. Woo, Jae Kim, Woosuk Cho, Young‐Jun Kim (2016)
Capacity fading behavior of Ni-rich layered cathode materials in Li-ion full cellsJournal of Electroanalytical Chemistry, 782
Shijian Zheng, Rong Huang, Y. Makimura, Y. Ukyo, C. Fisher, T. Hirayama, Y. Ikuhara (2011)
Microstructural Changes in LiNi0.8Co0.15Al0.05O2 Positive Electrode Material during the First CycleJournal of The Electrochemical Society, 158
Dean Miller, C. Proff, Jianguo Wen, Daniel Abraham, J. Bareño (2013)
Observation of Microstructural Evolution in Li Battery Cathode Oxide Particles by In Situ Electron MicroscopyAdvanced Energy Materials, 3
Chixia Tian, D. Nordlund, H. Xin, Yahong Xu, Yanjun Liu, D. Sokaras, Feng Lin, M. Doeff (2018)
Depth-dependent redox behavior of LiNi0.6Mn0.2Co0.2O2Journal of The Electrochemical Society, 165
Ki-Soo Lee, Seung‐Taek Myung, K. Amine, H. Yashiro, Y-K. Sun (2007)
Structural and Electrochemical Properties of Layered Li [ Ni1 − 2x Co x Mn x ] O2 ( x = 0.1 – 0.3 ) Positive Electrode Materials for Li-Ion BatteriesJournal of The Electrochemical Society, 154
Jing Li, Hanshuo Liu, J. Xia, Andrew Cameron, Mengyun Nie, G. Botton, J. Dahn (2017)
The Impact of Electrolyte Additives and Upper Cut-off Voltage on the Formation of a Rocksalt Surface Layer in LiNi0.8Mn0.1Co0.1O2 ElectrodesJournal of The Electrochemical Society, 164
Seong‐Min Bak, E. Hu, Yong-ning Zhou, Xiqian Yu, S. Senanayake, Sung-Jin Cho, Kwang-bum Kim, K. Chung, Xiao‐Qing Yang, K. Nam (2014)
Structural changes and thermal stability of charged LiNixMnyCozO₂ cathode materials studied by combined in situ time-resolved XRD and mass spectroscopy.ACS applied materials & interfaces, 6 24
N. Pieczonka, Zhongyi Liu, Peng Lu, K. Olson, John Moote, B. Powell, Jung-Hyun Kim (2013)
Understanding Transition-Metal Dissolution Behavior in LiNi0.5Mn1.5O4 High-Voltage Spinel for Lithium Ion BatteriesJournal of Physical Chemistry C, 117
J. Rask, B. Miner, P. Buseck (1987)
Determination of manganese oxidation states in solids by electron energy-loss spectroscopyUltramicroscopy, 21
K. Ishidzu, Y. Oka, Tatsuya Nakamura (2016)
Lattice volume change during charge/discharge reaction and cycle performance of Li[NixCoyMnz]O2Solid State Ionics, 288
R. Mossanek, G. Domínguez-Cañizares, Alejandro Gutiérrez, M. Abbate, D. Díaz-Fernández, L. Soriano (2013)
Effects of Ni vacancies and crystallite size on the O 1s and Ni 2p x-ray absorption spectra of nanocrystalline NiOJournal of Physics: Condensed Matter, 25
L. Biasi, A. Kondrakov, H. Geßwein, T. Brezesinski, P. Hartmann, J. Janek (2017)
Between Scylla and Charybdis: Balancing Among Structural Stability and Energy Density of Layered NCM Cathode Materials for Advanced Lithium-Ion BatteriesJournal of Physical Chemistry C, 121
S. Muto, Y. Sasano, K. Tatsumi, T. Sasaki, K. Horibuchi, Yoji Takeuchi, Y. Ukyo (2009)
Capacity-Fading Mechanisms of LiNiO2-Based Lithium-Ion Batteries II. Diagnostic Analysis by Electron Microscopy and SpectroscopyJournal of The Electrochemical Society, 156
Wen Liu, Pilgun Oh, Xien Liu, Min‐Joon Lee, Woongrae Cho, Sujong Chae, Youngsik Kim, Jaephil Cho (2015)
Nickel-rich layered lithium transition-metal oxide for high-energy lithium-ion batteries.Angewandte Chemie, 54 15
Hyung-Joo Noh, Sung-june Youn, C. Yoon, Yang‐Kook Sun (2013)
Comparison of the structural and electrochemical properties of layered Li[NixCoyMnz]O2 (x = 1/3, 0.5, 0.6, 0.7, 0.8 and 0.85) cathode material for lithium-ion batteriesJournal of Power Sources, 233
J. Goodenough, Kyusung Park (2013)
The Li-ion rechargeable battery: a perspective.Journal of the American Chemical Society, 135 4
Feng Lin, Isaac Markus, D. Nordlund, T. Weng, M. Asta, H. Xin, M. Doeff (2014)
Surface reconstruction and chemical evolution of stoichiometric layered cathode materials for lithium-ion batteriesNature Communications, 5
Multiple applications of lithium‐ion batteries in energy storage systems and electric vehicles require highly stable electrode materials for long‐term battery operation. Among the various cathode materials, high‐Ni cathode materials enable a high energy density. However, cathode degradation accompanied by complex chemical and structural changes results in capacity and voltage fading in batteries. Cathode degradation remains poorly understood; the majority of studies have only explored the oxidation states of transition‐metal ions in localized areas and have rarely evaluated chemical degradation in complete particles after prolonged cycling. This study systematically investigates the degradation of a high‐Ni cathode by comparing the chemical, structural, and electrical changes in pristine and 500 times‐cycled cathodes. Electron probe micro‐analysis and X‐ray energy dispersive spectroscopy reveal changes in the Ni:O ratio from 1:2 to 1:1 over a large area inside the secondary particle. Electron energy loss spectroscopy analysis related to structural changes is performed for the entire primary particle area to visualize the oxidation state of transition‐metal ions in two dimensions. The results imply that the observed monotonic capacity fade without unusual changes is due to the continuous formation of the Ni2+ phase from the surface to the bulk through chemical and structural degradation.
Advanced Energy Materials – Wiley
Published: Sep 1, 2020
Keywords: ; ; ; ;
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.