Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Damage detection using electromechanical impedance spectra – development and validation of a non‐destructive structure monitoring system

Damage detection using electromechanical impedance spectra – development and validation of a... Editor’ S rEC o MME ndation S d amage detection using electromechanical impedance spectra – development and validation of a non-destructive structure monitoring system This paper has been published in Stahl- able for identification of the structural tions were carried out. The expected op- bau 4/2020 in German. state. The investigation method could be posite development of the spectra under established in the monitoring of bridge the influence of varying preloads and saw Abstract: A new monitoring method for structures. cuts was determined. The fatigue experi- non-destructive damage detection on ments which were carried out subse- bolts has been developed and tested for The investigations were carried out on quently have shown the applicability on applicability on real life structures. The threaded bolts welded onto steel plates. real life structures. In the article first ex- method is based on the measurement of In order to determine the general be- perimental results are presented and the electromechanical impedance spectra, haviour of the electromechanical imped- applicability of the measurement method- which change varying influences on the ance spectra of the test specimens under ology for structural monitoring is dis- structure. Therefore, this method is suit- varying conditions, preliminary investiga- cussed afterwards. Sahm, D.; Pak, D.; Fritzen, C.-P.; Dreis- bach, A.-L.; Dietrich, G.; Yokaribas, V. (2020) Schadensdetektion mithilfe elek- tromechanischer Impedanzspektren in: Stahlbau 89, No. 4, pp. 399-411. https://doi.org/10.1002/stab.201900118 Susceptance spectra of preliminary test V2 – cut at bolt base Steel Construction 13 (2020), No. 2 91 http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Steel Construction: Design and Research Wiley

Damage detection using electromechanical impedance spectra – development and validation of a non‐destructive structure monitoring system

Steel Construction: Design and Research , Volume 13 (2) – May 1, 2020

Loading next page...
 
/lp/wiley/damage-detection-using-electromechanical-impedance-spectra-development-673dmtC7Tp
Publisher
Wiley
Copyright
© 2020 Ernst & Sohn Verlag für Architektur und technische Wissenschaften GmbH & Co. KG, Berlin
ISSN
1867-0520
eISSN
1867-0539
DOI
10.1002/stco.202070204
Publisher site
See Article on Publisher Site

Abstract

Editor’ S rEC o MME ndation S d amage detection using electromechanical impedance spectra – development and validation of a non-destructive structure monitoring system This paper has been published in Stahl- able for identification of the structural tions were carried out. The expected op- bau 4/2020 in German. state. The investigation method could be posite development of the spectra under established in the monitoring of bridge the influence of varying preloads and saw Abstract: A new monitoring method for structures. cuts was determined. The fatigue experi- non-destructive damage detection on ments which were carried out subse- bolts has been developed and tested for The investigations were carried out on quently have shown the applicability on applicability on real life structures. The threaded bolts welded onto steel plates. real life structures. In the article first ex- method is based on the measurement of In order to determine the general be- perimental results are presented and the electromechanical impedance spectra, haviour of the electromechanical imped- applicability of the measurement method- which change varying influences on the ance spectra of the test specimens under ology for structural monitoring is dis- structure. Therefore, this method is suit- varying conditions, preliminary investiga- cussed afterwards. Sahm, D.; Pak, D.; Fritzen, C.-P.; Dreis- bach, A.-L.; Dietrich, G.; Yokaribas, V. (2020) Schadensdetektion mithilfe elek- tromechanischer Impedanzspektren in: Stahlbau 89, No. 4, pp. 399-411. https://doi.org/10.1002/stab.201900118 Susceptance spectra of preliminary test V2 – cut at bolt base Steel Construction 13 (2020), No. 2 91

Journal

Steel Construction: Design and ResearchWiley

Published: May 1, 2020

There are no references for this article.