Access the full text.
Sign up today, get DeepDyve free for 14 days.
Ju Chen, B. Young (2007)
Cold-formed steel lipped channel columns at elevated temperaturesEngineering Structures, 29
G. Hancock, Thomas Murray, D. Ellifritt (2001)
Cold-Formed Steel Structures to the AISI Specification
A. Filiatrault, P. Higgins, A. Wanitkorkul, James Courtwright (2007)
Experimental stiffness of pallet-type steel storage rack tier drop connectorsPractice Periodical on Structural Design and Construction, 12
R. Serrette, D. Nolan (2009)
Reversed Cyclic Performance of Shear Walls with Wood Panels Attached to Cold-Formed Steel with PinsJournal of Structural Engineering-asce, 135
S. Ádány, B. Schafer (2006)
Buckling mode decomposition of single-branched open cross-section members via finite strip method: Application and examplesThin-walled Structures, 44
R. Gonçalves, D. Camotim (2011)
Generalised beam theory-based finite elements for elastoplastic thin-walled metal membersThin-walled Structures, 49
C. Basaglia, D. Camotim (2010)
On the Direct Strength Design of Continuous Cold-formed Steel Beams
C. Basaglia, D. Camotim (2011)
On the Incorporation of Load Application Effects in the GBT Buckling Analysis of Thin-Walled Steel Beams and Frames
G. Darcy, M. Mahendran (2008)
Development of a New Cold-Formed Steel Building SystemAdvances in Structural Engineering, 11
B. Schafer (2008)
REVIEW: THE DIRECT STRENGTH METHOD OF COLD-FORMED STEEL MEMBER DESIGNJournal of Constructional Steel Research, 64
(1993)
Eurocode 3 -Design of Steel Sructures, Part 1-3: General rules -Supplementary rules for cold formed thin gauge members and sheeting
M. Casafont, M. Pastor, F. Roure, Teoman Peköz (2011)
An experimental investigation of distortional buckling of steel storage rack columnsThin-walled Structures, 49
Yuangqi Li, Feiyu Liu, Zuyan Shen, X. Yao (2010)
Shear Behaviors of Light-gauge Composite Walls under Monotonic and Cyclic Loading
N. Silvestre, D. Camotim, P. Dinis (2009)
DIRECT STRENGTH PREDICTION OF LIPPED CHANNEL COLUMNS EXPERIENCING LOCAL-PLATE/DISTORTIONAL INTERACTION
C. Moen, B. Schafer (2009)
Elastic buckling of cold-formed steel columns and beams with holesEngineering Structures, 31
C. Moen, B. Schafer (2010)
Extending Direct Strength Design to Cold-Formed Steel Beams with Holes
G. Hancock (1978)
LOCAL DISTORTIONAL AND LATERAL BUCKLING OF I-BEAMSJournal of the Structural Division, 104
C. Pham, G. Hancock (2012)
Direct Strength Design of Cold-Formed C-Sections for Shear and Combined ActionsJournal of Structural Engineering-asce, 138
V. Zeinoddini, B. Schafer (2011)
GLOBAL IMPERFECTIONS AND DIMENSIONAL VARIATIONS IN COLD-FORMED STEEL MEMBERSInternational Journal of Structural Stability and Dynamics, 11
B. Schafer, N. Nakata, S. Buonopane, R. Madsen (2011)
CFS-NEES: Advancing Cold-Formed Steel Earthquake Engineering
(2011)
Towards a strain energy based strength prediction for locally slender structural steel columns, in Annual Stability Conference
P. Dinis, D. Camotim (2010)
Local/distortional mode interaction in cold-formed steel lipped channel beamsThin-walled Structures, 48
B. Gilbert, K. Rasmussen (2011)
Determination of the base plate stiffness and strength of steel storage racksJournal of Constructional Steel Research, 67
Wei-wen Yu, R. Laboube (2010)
Cold-Formed Steel Design: Yu/Cold-Formed Steel Design 4E
J. Rondal (2000)
Cold formed steel members and structuresJournal of Constructional Steel Research, 55
C. Pham, G. Hancock (2010)
Experimental Investigation of High Strength Cold-Formed C-Sections in Combined Bending and ShearJournal of Structural Engineering-asce, 136
C. Rogers, N. Balh, C. Ong-Tone, I. Shamim, J. DaBreo (2011)
Development of Seismic Design Provisions for Steel Sheet Sheathed Shear Walls
B. Gilbert, K. Rasmussen (2010)
Bolted moment connections in drive-in and drive-through steel storage racksJournal of Constructional Steel Research, 66
Lei Xu, Joel Martínez (2006)
Strength and stiffness determination of shear wall panels in cold-formed steel framingThin-walled Structures, 44
B. Gilbert, K. Rasmussen (2011)
Determination of accidental forklift truck impact forces on drive-in steel rack structuresEngineering Structures, 33
S. Ádány (2006)
Buckling Analysis of Cold-formed Steel Members Using CUFSM
T. Galambos (1998)
Guide to stability design criteria for metal structures
C. Moen, B. Schafer (2008)
Experiments on cold-formed steel columns with holesThin-walled Structures, 46
B. Schafer, C. Moen, J. Smith (2010)
Workshop on Direct Strength Method Design of Cold-formed Steel Members
(2011)
Gener-alised beam theory-based finite elements
R. Landolfo, L. Fiorino, G. Corte (2006)
Seismic Behavior of Sheathed Cold-Formed Structures: Physical TestsJournal of Structural Engineering-asce, 132
N. Silvestre, D. Camotim (2006)
Local-Plate and Distortional Postbuckling Behavior of Cold-Formed Steel Lipped Channel Columns with Intermediate StiffenersJournal of Structural Engineering-asce, 132
Keywords: cold-formed steel; constrained Finite Strip Method; Direct Strength Method
R. Gonçalves, P. Dinis, D. Camotim (2009)
GBT formulation to analyse the first-order and buckling behaviour of thin-walled members with arbitrary cross-sectionsThin-walled Structures, 47
C. Moen, B. Schafer (2011)
Direct Strength Method for Design of Cold-Formed Steel Columns with HolesJournal of Structural Engineering-asce, 137
C. Pham, G. Hancock (2010)
Numerical simulation of high strength cold-formed purlins in combined bending and shearJournal of Constructional Steel Research, 66
P. Dinis, D. Camotim, N. Silvestre (2007)
FEM-based analysis of the local-plate/distortional mode interaction in cold-formed steel lipped channel columnsComputers & Structures, 85
J. Davies (2006)
Light gauge steel cassette wall construction — theory and practiceJournal of Constructional Steel Research, 62
W. Quach, J. Teng, K. Chung (2006)
Finite element predictions of residual stresses in press-braked thin-walled steel sectionsEngineering Structures, 28
Zhanjie Li, M. Hanna, S. Ádány, B. Schafer (2011)
Impact of basis, orthogonalization, and normalization on the constrained Finite Strip Method for stability solutions of open thin-walled membersThin-walled Structures, 49
R. Greiner, J. Lindner (2006)
Interaction formulae for members subjected to bending and axial compression in EUROCODE 3—the Method 2 approachJournal of Constructional Steel Research, 62
(2010)
Elastic buckling studies of thin plates and coldformed steel members in shear
D. Dubina, A. Stratan, Z. Nagy (2009)
FULL – SCALE TESTS ON COLD-FORMED STEEL PITCHED-ROOF PORTAL FRAMES WITH BOLTED JOINTS
C. Uang, A. Sato, Jong-Kook Hong, K. Wood (2010)
Cyclic Testing and Modeling of Cold-Formed Steel Special Bolted Moment Frame ConnectionsJournal of Structural Engineering-asce, 136
S. Ádány, B. Schafer (2006)
Buckling mode decomposition of single-branched open cross-section members via finite strip method : DerivationThin-walled Structures, 44
R. Serrette (2010)
Seismic Design Strength of Cold-Formed Steel-Framed Shear WallsJournal of Structural Engineering-asce, 136
Andrew Sarawit, Teoman Peköz (2006)
Notional load method for industrial steel storage racksThin-walled Structures, 44
(2010)
Innovative damage control systems using replaceable energy dissipating steel fuses for coldformed steel structures
C. Moen, T. Igusa, B. Schafer (2008)
Prediction of residual stresses and strains in cold-formed steel membersThin-walled Structures, 46
(2010)
Behavior and design of axially compressed sheathed wall studs
C. Pham, G. Hancock (2009)
Shear buckling of thin-walled channel sectionsJournal of Constructional Steel Research, 65
D. Yap, G. Hancock (2008)
Experimental Study of Complex High-Strength Cold-Formed Cross-Shaped Steel SectionJournal of Structural Engineering-asce, 134
D. Camotim, C. Basaglia, N. Silvestre (2010)
GBT buckling analysis of thin-walled steel frames: A state-of-the-art reportThin-walled Structures, 48
L. Fiorino, O. Iuorio, R. Landolfo (2009)
Sheathed cold-formed steel housing: A seismic design procedureThin-walled Structures, 47
Tharmarajah Anapayan, M. Mahendran, D. Mahaarachchi (2011)
Section moment capacity tests of LiteSteel BeamsScience & Engineering Faculty
M. Al-Kharat, C. Rogers (2007)
Inelastic performance of cold-formed steel strap braced wallsJournal of Constructional Steel Research, 63
G. Hancock (2003)
Cold-formed steel structuresJournal of Constructional Steel Research, 59
Zhanjie Li, B. Schafer (2010)
Buckling Analysis of Cold-formed Steel Members with General Boundary Conditions Using CUFSM Conventional and Constrained Finite Strip Methods
S. Ádány, B. Schafer (2008)
A full modal decomposition of thin-walled, single-branched open cross-section members via the constrained finite strip methodJournal of Constructional Steel Research, 64
L. Dunai, G. Jakab (2011)
STABILITY BEHAVIOR AND DESIGN OF NONCONVENTIONAL COLD-FORMED STEEL STRUCTURES — RESEARCH REVIEWInternational Journal of Structural Stability and Dynamics, 11
N. Baldassino, R. Zandonini (2011)
DESIGN BY TESTING OF INDUSTRIAL RACKS
Tharmarajah Anapayan, M. Mahendran, D. Mahaarachchi (2011)
Lateral distortional buckling tests of a new hollow flange channel beam
F. Roure, M. Pastor, M. Casafont, M. Somalo (2011)
Stub column tests for racking design: Experimental testing, FE analysis and EC3Thin-walled Structures, 49
(2010)
Park 4200 Condominium, Dallas, TX
Cheng Yu, B. Schafer (2007)
Simulation of cold-formed steel beams in local and distortional buckling with applications to the direct strength methodJournal of Constructional Steel Research, 63
Vieira, Schafer (2009)
Full-scale testing of sheathed cold-formed steel wall stud systems in axial compression
D. Yap, G. Hancock (2011)
Experimental Study of High-Strength Cold-Formed Stiffened-Web C-Sections in CompressionJournal of Structural Engineering-asce, 137
C. Moen, B. Schafer (2009)
Elastic buckling of thin plates with holes in compression or bendingThin-walled Structures, 47
P. Dinis, D. Camotim (2011)
Post-buckling behaviour and strength of cold-formed steel lipped channel columns experiencing distortional/global interactionComputers & Structures, 89
S. Ádány, A. Joó, B. Schafer (2010)
Buckling mode identification of thin-walled members by using cFSM base functionsThin-walled Structures, 48
(2007)
Standard for Cold-Formed Steel Framing -Lateral Design. American Iron and Steel Institute
Cheng Yu (2010)
Shear resistance of cold-formed steel framed shear walls with 0.686 mm, 0.762 mm, and 0.838 mm steel sheet sheathingEngineering Structures, 32
(2010)
Cold- Formed Steel Design. John Wiley & Sons, Inc.: Hoboken. p. 1 online resource
R. Bebiano, N. Silvestre, D. Camotim (2008)
GBTUL- a Code for the Buckling Analysis of Cold-formed Steel Members
R. Serrette, I. Lam, H. Qi, H. Hernández, A. Toback (2006)
Cold-Formed Steel Frame Shear Walls Utilizing Structural AdhesivesJournal of Structural Engineering-asce, 132
D. Dubina (2008)
Behavior and performance of cold-formed steel-framed houses under seismic actionJournal of Constructional Steel Research, 64
A. Ng, R. Beale, M. Godley (2009)
Methods of restraining progressive collapse in rack structuresEngineering Structures, 31
R. Bebiano, N. Silvestre, D. Camotim (2007)
GBT FORMULATION TO ANALYZE THE BUCKLING BEHAVIOR OF THIN-WALLED MEMBERS SUBJECTED TO NON-UNIFORM BENDINGInternational Journal of Structural Stability and Dynamics, 07
C. Pham, G. Hancock (2009)
Direct Strength Design of Cold-Formed PurlinsJournal of Structural Engineering-asce, 135
L. Vieira, B. Schafer (2012)
Lateral stiffness and strength of sheathing braced cold-formed steel stud wallsEngineering Structures, 37
A. Sato, C. Uang (2010)
Seismic Performance Factors for Cold-Formed Steel Special Bolted Moment FramesJournal of Structural Engineering-asce, 136
A. Landesmann, D. Camotim (2011)
On The Distortional Buckling, Post-Buckling And Strength of Cold-Formed Steel Lipped Channel Columns Under Fire ConditionsJournal of Structural Fire Engineering, 2
B. Schafer, Zhanjie Li, C. Moen (2010)
COMPUTATIONAL MODELING OF COLD-FORMED STEELThin-walled Structures, 48
Francis Fennell (2010)
HopkinsVictorian Poetry, 48
A. Landesmann, D. Camotim (2010)
Distortional Failure and Design of Cold-Formed Steel Rack-Section Columns under Fire Conditions
L. Vieira, Y. Shifferaw, B. Schafer (2011)
Experiments on sheathed cold-formed steel studs in compressionJournal of Constructional Steel Research, 67
K. Poologanathan, M. Mahendran (2011)
New design rules for the shear strength of LiteSteel BeamsScience & Engineering Faculty
B. Gilbert, K. Rasmussen (2011)
Impact tests and parametric impact studies on drive-in steel storage racksEngineering Structures, 33
Ju Chen, B. Young (2008)
Design of high strength steel columns at elevated temperaturesJournal of Constructional Steel Research, 64
S. Ádány, N. Silvestre, D. Camotim (2009)
GBT AND cFSM: TWO MODAL APPROACHES TO THE BUCKLING ANALYSIS OF UNBRANCHED THIN-WALLED MEMBERS
The objective of this paper is to provide a brief review of recent (over approximately the last five years) advances in the application, analysis and design of cold‐formed steel structures. Attention here is focused on load‐bearing cold‐formed steel structures; as opposed to secondary systems, curtain walls, etc. Cold‐formed steel applications continue to advance in three primary categories: framing, metal buildings, and racks. Examples largely derived from the author’s experiences in North America are used to illustrate the applications. The behaviour of cold‐formed steel structures can be complicated due to the thin‐walled nature of the sections; thus, analysis advances are required. Recent work in Generalized Beam Theory and the constrained Finite Strip Method demonstrate that, at least when it comes to thin‐walled members, significant advances in structural analysis are still possible and desirable. Design of cold‐formed steel structures continues to see significant improvements and refinements. Recent efforts related to the Direct Strength Method of design are highlighted, including novel extensions from the member to the system level. Finally, similar to many other areas of structural engineering, seismic engineering has motivated notable advances in applications, analysis, and design. For cold‐formed steel structures these advances are reviewed to demonstrate current progress and future directions in this important area.
Steel Construction: Design and Research – Wiley
Published: Aug 1, 2011
Keywords: ; ; ;
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.