Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Bulk Restructure of Perovskite Films via Surface Passivation for High‐Performance Solar Cells

Bulk Restructure of Perovskite Films via Surface Passivation for High‐Performance Solar Cells Defects in perovskite films and the suboptimal interface contact largely limit the performance and stability of inverted perovskite solar cells (PSCs). A simple surface post‐treatment with N‐benzyloxycarbonyl‐d‐valine (NBDV) is developed to overcome these problems. The device performance following NBDV treatment is systemically investigated. It is showed that NBDV surface post‐treatment results in the bulk restructure of the entire perovskite film and improves the film‐forming property of [6,6]‐phenyl‐C61‐butyric acid methyl ester. The grain sizes, crystallinity, trap states, cathode interfaces, as well as the built‐in field are also improved, which result in PSC performance and stability enhancement. A relatively higher power conversion efficiency (PCE) of 21.80% is reached, which is comparable to the PCE record based on single‐crystal MAPbI3. Meanwhile, the PCE of the NBDV devices can retain ≈77% and 84% of the initial value after storage for 768 h (32 days) in air and 8376 h (349 days) in N2, respectively, while the control devices only maintain ≈53% and 38% of their initial PCE values under the same exposure conditions. This work provides means to promote bulk, surface, and interface regulation toward high performance and stable inverted PSCs. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Energy Materials Wiley

Bulk Restructure of Perovskite Films via Surface Passivation for High‐Performance Solar Cells

Loading next page...
 
/lp/wiley/bulk-restructure-of-perovskite-films-via-surface-passivation-for-high-tM0Rd2gqvK

References (107)

Publisher
Wiley
Copyright
© 2022 Wiley‐VCH GmbH
ISSN
1614-6832
eISSN
1614-6840
DOI
10.1002/aenm.202201787
Publisher site
See Article on Publisher Site

Abstract

Defects in perovskite films and the suboptimal interface contact largely limit the performance and stability of inverted perovskite solar cells (PSCs). A simple surface post‐treatment with N‐benzyloxycarbonyl‐d‐valine (NBDV) is developed to overcome these problems. The device performance following NBDV treatment is systemically investigated. It is showed that NBDV surface post‐treatment results in the bulk restructure of the entire perovskite film and improves the film‐forming property of [6,6]‐phenyl‐C61‐butyric acid methyl ester. The grain sizes, crystallinity, trap states, cathode interfaces, as well as the built‐in field are also improved, which result in PSC performance and stability enhancement. A relatively higher power conversion efficiency (PCE) of 21.80% is reached, which is comparable to the PCE record based on single‐crystal MAPbI3. Meanwhile, the PCE of the NBDV devices can retain ≈77% and 84% of the initial value after storage for 768 h (32 days) in air and 8376 h (349 days) in N2, respectively, while the control devices only maintain ≈53% and 38% of their initial PCE values under the same exposure conditions. This work provides means to promote bulk, surface, and interface regulation toward high performance and stable inverted PSCs.

Journal

Advanced Energy MaterialsWiley

Published: Sep 1, 2022

Keywords: interfaces; inverted PSCs; N ‐benzyloxycarbonyl‐ d ‐valine; post‐treatment

There are no references for this article.