Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Boosting Power‐Generating Performance of Triboelectric Nanogenerators via Artificial Control of Ferroelectric Polarization and Dielectric Properties

Boosting Power‐Generating Performance of Triboelectric Nanogenerators via Artificial Control of... Low output current represents a critical challenge that has interrupted the use of triboelectric nanogenerators (TNGs) in a wide range of applications as sustainable power sources. Many approaches (e.g., operation at high frequency, parallel stacks of individual devices, and hybridization with other energy harvesters) remain limited in solving the challenge of low output current from TNGs. Here, a nanocomposite material system having a superior surface charge density as a triboelectric active material is reported. The nanocomposite material consists of a high dielectric ceramic material, barium titanate, showing great charge‐trapping capability, together with a ferroelectric copolymer matrix, Poly(vinylidenefluoride‐co‐trifluoroethylene) (P(VDF‐TrFE)), with electrically manipulated polarization with strong triboelectric charge transfer characteristics. Based on a contact potential difference study showing that poled P(VDF‐TrFE) has 18 times higher charge attracting properties, a fraction between two components is optimized. Boosting power‐generating performance is achieved for 1130 V of output voltage and 1.5 mA of output current with this ferroelectric composite‐based TNG, under 6 kgf of pushing force at 5 Hz. An enormously faster charging property than traditional polymer film‐based TNGs is demonstrated in this study. Finally, the charging of a self‐powering smartwatch with a charging management circuit system with no external power sources is demonstrated successfully. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Energy Materials Wiley

Boosting Power‐Generating Performance of Triboelectric Nanogenerators via Artificial Control of Ferroelectric Polarization and Dielectric Properties

Loading next page...
 
/lp/wiley/boosting-power-generating-performance-of-triboelectric-nanogenerators-U0CU8Eou0s

References (48)

Publisher
Wiley
Copyright
Copyright © 2017 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim
ISSN
1614-6832
eISSN
1614-6840
DOI
10.1002/aenm.201600988
Publisher site
See Article on Publisher Site

Abstract

Low output current represents a critical challenge that has interrupted the use of triboelectric nanogenerators (TNGs) in a wide range of applications as sustainable power sources. Many approaches (e.g., operation at high frequency, parallel stacks of individual devices, and hybridization with other energy harvesters) remain limited in solving the challenge of low output current from TNGs. Here, a nanocomposite material system having a superior surface charge density as a triboelectric active material is reported. The nanocomposite material consists of a high dielectric ceramic material, barium titanate, showing great charge‐trapping capability, together with a ferroelectric copolymer matrix, Poly(vinylidenefluoride‐co‐trifluoroethylene) (P(VDF‐TrFE)), with electrically manipulated polarization with strong triboelectric charge transfer characteristics. Based on a contact potential difference study showing that poled P(VDF‐TrFE) has 18 times higher charge attracting properties, a fraction between two components is optimized. Boosting power‐generating performance is achieved for 1130 V of output voltage and 1.5 mA of output current with this ferroelectric composite‐based TNG, under 6 kgf of pushing force at 5 Hz. An enormously faster charging property than traditional polymer film‐based TNGs is demonstrated in this study. Finally, the charging of a self‐powering smartwatch with a charging management circuit system with no external power sources is demonstrated successfully.

Journal

Advanced Energy MaterialsWiley

Published: Jan 1, 2017

Keywords: ; ; ; ;

There are no references for this article.