Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Avoiding CO2 Improves Thermal Stability at the Interface of Li7La3Zr2O12 Electrolyte with Layered Oxide Cathodes

Avoiding CO2 Improves Thermal Stability at the Interface of Li7La3Zr2O12 Electrolyte with Layered... Solid‐state batteries promise higher energy densities and better safety than Li‐ion batteries with liquid electrolytes. However, the interface between solid electrolyte and cathode is unstable at the elevated temperatures that are needed while sintering to achieve good bonding between ceramic components. Here, the hypothesis is that, the gas environment, especially the presence of CO2, is critical in determining the stability of the solid electrolyte–cathode interface. The effect of gas species on the interface is systematically probed, by a using Li7La3Zr2O12 (LLZO) solid electrolyte with a thin film LiNi0.6Mn0.2Co0.2O2 cathode as a model system to enable interface sensitivity. Detrimental phases formed at the interface and their onset conditions are identified by X‐ray absorption spectroscopy, X‐ray diffraction, and Gibbs free energy analysis. As a result, removing CO2 and minimizing H2O(g) during sintering is necessary to obtain good contact at the LLZO|cathode interface without forming secondary phases. Sintering in O2 is ideal, yielding excellent chemical stability and low interfacial resistance. Secondary phases also do not form in N2, but oxygen loss occurs at elevated temperatures. The interfacial resistance obtained upon sintering in pure O2 is comparable to the lowest values at LLZO interfaces with protective coatings, but here without the need for interface coatings. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Energy Materials Wiley

Avoiding CO2 Improves Thermal Stability at the Interface of Li7La3Zr2O12 Electrolyte with Layered Oxide Cathodes

18 pages

Loading next page...
 
/lp/wiley/avoiding-co2-improves-thermal-stability-at-the-interface-of-xVgH70061q

References (98)

Publisher
Wiley
Copyright
© 2022 Wiley‐VCH GmbH
ISSN
1614-6832
eISSN
1614-6840
DOI
10.1002/aenm.202102741
Publisher site
See Article on Publisher Site

Abstract

Solid‐state batteries promise higher energy densities and better safety than Li‐ion batteries with liquid electrolytes. However, the interface between solid electrolyte and cathode is unstable at the elevated temperatures that are needed while sintering to achieve good bonding between ceramic components. Here, the hypothesis is that, the gas environment, especially the presence of CO2, is critical in determining the stability of the solid electrolyte–cathode interface. The effect of gas species on the interface is systematically probed, by a using Li7La3Zr2O12 (LLZO) solid electrolyte with a thin film LiNi0.6Mn0.2Co0.2O2 cathode as a model system to enable interface sensitivity. Detrimental phases formed at the interface and their onset conditions are identified by X‐ray absorption spectroscopy, X‐ray diffraction, and Gibbs free energy analysis. As a result, removing CO2 and minimizing H2O(g) during sintering is necessary to obtain good contact at the LLZO|cathode interface without forming secondary phases. Sintering in O2 is ideal, yielding excellent chemical stability and low interfacial resistance. Secondary phases also do not form in N2, but oxygen loss occurs at elevated temperatures. The interfacial resistance obtained upon sintering in pure O2 is comparable to the lowest values at LLZO interfaces with protective coatings, but here without the need for interface coatings.

Journal

Advanced Energy MaterialsWiley

Published: Apr 1, 2022

Keywords: Al‐doped Li 7 La 3 Zr 2 O 12; electrode/electrolyte interfaces; solid‐state batteries; soft XAS; XAS

There are no references for this article.