Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

20.8% Slot‐Die Coated MAPbI3 Perovskite Solar Cells by Optimal DMSO‐Content and Age of 2‐ME Based Precursor Inks

20.8% Slot‐Die Coated MAPbI3 Perovskite Solar Cells by Optimal DMSO‐Content and Age of 2‐ME Based... Solar cells incorporating metal‐halide perovskite (MHP) semiconductors are continuing to break efficiency records for solution‐processed solar cell devices. Scaling MHP‐based devices to larger area prototypes requires the development and optimization of scalable process technology and ink formulations that enable reproducible coating results. It is demonstrated that the power conversion efficiency (PCE) of small‐area methylammonium lead iodide (MAPbI3) devices, slot‐die coated from a 2‐methoxy‐ethanol (2‐ME) based ink with dimethyl‐sulfoxide (DMSO) used as an additive depends on the amount of DMSO and age of the ink formulation. When adding 12 mol% of DMSO, small‐area devices of high performance (20.8%) are achieved. The effect of DMSO content and age on the thin film morphology and device performance through in situ X‐ray diffraction and small‐angle X‐ray scattering experiments is rationalized. Adding a limited amount of DMSO prevents the formation of a crystalline intermediate phase related to MAPbI3 and 2‐ME (MAPbI3‐2‐ME) and induces the formation of the MAPbI3 perovskite phase. Higher DMSO content leads to the precipitation of the (DMSO)2MA2Pb3I8 intermediate phase that negatively affects the thin‐film morphology. These results demonstrate that rational insights into the ink composition and process control are critical to enable reproducible large‐scale manufacturing of MHP‐based devices for commercial applications. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Advanced Energy Materials Wiley

20.8% Slot‐Die Coated MAPbI3 Perovskite Solar Cells by Optimal DMSO‐Content and Age of 2‐ME Based Precursor Inks

Loading next page...
 
/lp/wiley/20-8-slot-die-coated-mapbi3-perovskite-solar-cells-by-optimal-dmso-GagaikL5FB

References (30)

Publisher
Wiley
Copyright
© 2021 Wiley‐VCH GmbH
ISSN
1614-6832
eISSN
1614-6840
DOI
10.1002/aenm.202003460
Publisher site
See Article on Publisher Site

Abstract

Solar cells incorporating metal‐halide perovskite (MHP) semiconductors are continuing to break efficiency records for solution‐processed solar cell devices. Scaling MHP‐based devices to larger area prototypes requires the development and optimization of scalable process technology and ink formulations that enable reproducible coating results. It is demonstrated that the power conversion efficiency (PCE) of small‐area methylammonium lead iodide (MAPbI3) devices, slot‐die coated from a 2‐methoxy‐ethanol (2‐ME) based ink with dimethyl‐sulfoxide (DMSO) used as an additive depends on the amount of DMSO and age of the ink formulation. When adding 12 mol% of DMSO, small‐area devices of high performance (20.8%) are achieved. The effect of DMSO content and age on the thin film morphology and device performance through in situ X‐ray diffraction and small‐angle X‐ray scattering experiments is rationalized. Adding a limited amount of DMSO prevents the formation of a crystalline intermediate phase related to MAPbI3 and 2‐ME (MAPbI3‐2‐ME) and induces the formation of the MAPbI3 perovskite phase. Higher DMSO content leads to the precipitation of the (DMSO)2MA2Pb3I8 intermediate phase that negatively affects the thin‐film morphology. These results demonstrate that rational insights into the ink composition and process control are critical to enable reproducible large‐scale manufacturing of MHP‐based devices for commercial applications.

Journal

Advanced Energy MaterialsWiley

Published: Mar 1, 2021

Keywords: ; ; ;

There are no references for this article.