Access the full text.
Sign up today, get DeepDyve free for 14 days.
R. Roberts, R. Rowe, P. York (1993)
The measurement of the critical stress intensity factor (KIC) of pharmaceutical powders using three point single edge notched beam (SENB) testingInternational Journal of Pharmaceutics, 91
(1990)
Microstructure and mechanical properties of ZrO2-2mol% Y2O3 ceramics
H. Fischer, R. Marx (2002)
Fracture toughness of dental ceramics: comparison of bending and indentation method.Dental materials : official publication of the Academy of Dental Materials, 18 1
I. Nilüfer, H. Gökçe, F. Muhaffel, M. Öveçoǧlu, H. Cimenoglu (2016)
The effect of La2O3 on the microstructure and room temperature mechanical properties of t-ZrO2Ceramics International, 42
H. Klemm (2010)
Silicon Nitride for High‐Temperature ApplicationsJournal of the American Ceramic Society, 93
G. Quinn, J. Swab, M. Motyka (2003)
Fracture Toughness of a Toughened Silicon Nitride by ASTM C 1421Journal of the American Ceramic Society, 86
A. Heuer, M. Readey, R. Steinbrech (1988)
Resistance curve behavior of supertough MgO-partially-stabilized ZrO2Materials Science and Engineering A-structural Materials Properties Microstructure and Processing
S. Scherrer, I. Denry, H. Wiskott (1998)
Comparison of three fracture toughness testing techniques using a dental glass and a dental ceramic.Dental materials : official publication of the Academy of Dental Materials, 14 4
(2010)
Microstructure and high temperature strength of SiC W/SiC composites by chemical vapor infiltration
Yu-Chuan Wu, Yueh Chiang (2011)
The m–t Transformation and Twinning Analysis of Hot‐Pressed Sintered 3YSZ CeramicsJournal of the American Ceramic Society, 94
M. Trunec, Z. Chlup (2009)
Higher fracture toughness of tetragonal zirconia ceramics through nanocrystalline structureScripta Materialia, 61
I. Bar-on, G. Quinn, J. Salem, M. Jenkins (2002)
Development of ASTM C 1421-99 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics
J. Cui, Zhenyuan Gong, Pinggen Rao (2017)
Effect of molten zone ablated by femtosecond laser on fracture toughness of oxide ceramicsJournal of The European Ceramic Society, 38
Hao-Wen Liu, Wei Zhao, Yi Ji, J. Cui, Yanhui Chu, Pinggen Rao (2017)
Determination of fracture toughness of zirconia ceramics with different yttria concentrations by SEVNB methodCeramics International, 43
Wei Zhao, Cheng Peng, M. Lv, Mingmin Bai, Pinggen Rao (2015)
Effect of notch depth on fracture toughness of Y-TZP and determination of its actual valueCeramics International, 41
Wei Zhao, Pinggen Rao, Z. Ling (2014)
A new method for the preparation of ultra-sharp V-notches to measure fracture toughness in ceramicsJournal of The European Ceramic Society, 34
M. Turon-Vinas, M. Anglada (2014)
Fracture toughness of zirconia from a shallow notch produced by ultra-short pulsed laser ablationJournal of The European Ceramic Society, 34
Y. Hua, Litong Zhang, Lai-fei Cheng, Zheng-Xian Li, Jihong Du (2010)
Microstructure and high temperature strength of SiCW/SiC composites by chemical vapor infiltrationMaterials Science and Engineering A-structural Materials Properties Microstructure and Processing, 527
(2015)
Assessment in Si3N4 of a newmethod for determining the fracture toughness from a surface notchmicro-machined by ultra-short pulsed laser ablation
T. Nishida, Y. Hanaki, G. Pezzotti (1994)
Effect of Notch‐Root Radius on the Fracture Toughness of a Fine‐Grained AluminaJournal of the American Ceramic Society, 77
M. Turon-Vinas, M. Anglada (2015)
Assessment in Si3N4 of a new method for determining the fracture toughness from a surface notch micro-machined by ultra-short pulsed laser ablationJournal of The European Ceramic Society, 35
T. Fett (2005)
Influence of a finite notch root radius on fracture toughnessJournal of The European Ceramic Society, 25
Y Zhou (1990)
10.1016/0272-8842(90)90086-UCeram. Int., 16
I. Denry, J. Kelly (2008)
State of the art of zirconia for dental applications.Dental materials : official publication of the Academy of Dental Materials, 24 3
R. Garvie, R. Hannink, R. Pascoe (1975)
Ceramic steel?Nature, 258
H. Fischer, A. Waindich, R. Telle (2008)
Influence of preparation of ceramic SEVNB specimens on fracture toughness testing results.Dental materials : official publication of the Academy of Dental Materials, 24 5
The femtosecond lasers were used to cut an ultra-sharp V-notch with a tip radius less than 0.5 μm on 3Y-TZP and Si3N4 ceramic samples. The KIc were measured accurately with the improved single-edge V-notched beam (SEVNB) method. The test results show that the true KIc of the 3Y-TZP is lower than that of the Si3N4 ceramic. However, the KIc measured by SENB method and the bending strength show that the mechanical property of 3Y-TZP is better than that of Si3N4 in the application without crack source.
Journal of the Australian Ceramic Society – Springer Journals
Published: Jul 1, 2022
Keywords: Fracture toughness; Zirconia; Silicon nitride; Phase transformation toughening
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.