Access the full text.
Sign up today, get DeepDyve free for 14 days.
W. Oliver, G. Pharr (2004)
Measurement of hardness and elastic modulus by instrumented indentation: Advances in understanding and refinements to methodologyJournal of Materials Research, 19
Yang-Tse Cheng, W. Ni, Che-Min Cheng (2005)
Determining the instantaneous modulus of viscoelastic solids using instrumented indentation measurementsJournal of Materials Research, 20
J. Rho, Peter Zioupos, J. Currey, G. Pharr (1999)
Variations in the individual thick lamellar properties within osteons by nanoindentation.Bone, 25 3
M. Sakai (1999)
The Meyer hardness: A measure for plasticity?Journal of Materials Research, 14
V. Ferguson (2009)
Deformation partitioning provides insight into elastic, plastic, and viscous contributions to bone material behavior.Journal of the mechanical behavior of biomedical materials, 2 4
Jae-Young Rho, Marcel Roy, Ting Tsui, G. Pharr (1999)
Elastic properties of microstructural components of human bone tissue as measured by nanoindentation.Journal of biomedical materials research, 45 1
M. Oyen, C. Ko (2007)
Examination of local variations in viscous, elastic, and plastic indentation responses in healing boneJournal of Materials Science: Materials in Medicine, 18
W. Oliver, G. Pharr (1992)
An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experimentsJournal of Materials Research, 7
M. Oyen (2006)
Analytical techniques for indentation of viscoelastic materialsPhilosophical Magazine, 86
M. Oyen (2008)
Relating viscoelastic nanoindentation creep and load relaxation experimentsInternational Journal of Materials Research, 99
Chien‐Kuo Liu, Sanboh Lee, L. Sung, T. Nguyen (2006)
Load-displacement relations for nanoindentation of viscoelastic materialsJournal of Applied Physics, 100
V. Ferguson, A. Bushby, A. Boyde (2003)
Nanomechanical properties and mineral concentration in articular calcified cartilage and subchondral boneJournal of Anatomy, 203
C. Zhang, Y. Zhang, K. Zeng, L. Shen (2005)
Nanoindentation of polymers with a sharp indenterJournal of Materials Research, 20
M. Oyen, R. Cook (2003)
Load–displacement behavior during sharp indentation of viscous–elastic–plastic materialsJournal of Materials Research, 18
M. Oyen (2006)
Nanoindentation hardness of mineralized tissues.Journal of biomechanics, 39 14
T. Chudoba, F. Richter (2001)
Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus resultsSurface & Coatings Technology, 148
B. Briscoe, L. Fiori, E. Pelillo (1998)
Nano-indentation of polymeric surfacesJournal of Physics D, 31
P. Zysset, X. Guo, C. Hoffler, Kristin Moore, S. Goldstein (1999)
Elastic modulus and hardness of cortical and trabecular bone lamellae measured by nanoindentation in the human femur.Journal of biomechanics, 32 10
Amanpreet Bembey, M. Oyen, A. Bushby, A. Boyde (2006)
Viscoelastic properties of bone as a function of hydration state determined by nanoindentationPhilosophical Magazine, 86
C. Zhang, Y. Zhang, K. Zeng, L. Shen (2006)
Characterization of mechanical properties of polymers by nanoindentation testsPhilosophical Magazine, 86
Gang Feng, A. Ngan (2002)
Effects of Creep and Thermal Drift on Modulus Measurement Using Depth-sensing IndentationJournal of Materials Research, 17
Myung Chang, C. Ko, C. Liu, W. Douglas, R. DeLong, W. Seong, J. Hodges, K. An (2003)
Elasticity of alveolar bone near dental implant-bone interfaces after one month's healing.Journal of biomechanics, 36 8
A series viscous-elastic-plastic (VEP) indentation model was expanded to include analysis of the common trapezoidal testing condition, consisting of constant loading—and unloading—rates with an intervening creep hold period. This full VEP model was applied to analyze nanoindentation test of three polymers and five different types of bone. The full VEP solution allows for direct determination of the viscous term as calculated from the creep hold, while the elastic and plastic material parameters were determined from a non-linear curve-fit of the unloading displacement-time data. Additionally, the use of the trapezoidal loading procedure permitted analysis of the unloading load-displacement data with traditional Oliver-Pharr analysis; the material properties from this analysis compared well with those obtained with VEP analysis. Using the full VEP solution and fitted material constants the loading and creep hold displacement-time curves were simulated and matched well to both polymer and bone experimental data. The full VEP solution shows great promise in for obtaining material parameters for many viscoelastic materials such as hydrated bone, polymers, and other biological tissues.
Mechanics of Time-Dependent Materials – Springer Journals
Published: May 1, 2010
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.