Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Using long-flame coal in steel converters

Using long-flame coal in steel converters Preheating of scrap in converters by means of sorted long-flame coal has been introduced. Coal of the 25–13 mm class is preferable to the 50–25 mm class, in terms of faster ignition, stable combustion, stable metal temperature, shorter heating times, reduced oxygen consumption, and greater hot-metal replacement. The technology is recommended for converter shops. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Coke and Chemistry Springer Journals

Using long-flame coal in steel converters

Volynkina, E.; Strakhov, V.
Coke and Chemistry , Volume 53 (2) – May 27, 2010
Download PDF
7 pages

Loading next page...
 
/lp/springer-journals/using-long-flame-coal-in-steel-converters-b6oWEjML5m

References (2)

Publisher
Springer Journals
Copyright
Copyright © 2010 by Allerton Press, Inc.
Subject
Chemistry; Industrial Chemistry/Chemical Engineering
ISSN
1068-364X
eISSN
1934-8398
DOI
10.3103/S1068364X10020031
Publisher site
See Article on Publisher Site

Abstract

Preheating of scrap in converters by means of sorted long-flame coal has been introduced. Coal of the 25–13 mm class is preferable to the 50–25 mm class, in terms of faster ignition, stable combustion, stable metal temperature, shorter heating times, reduced oxygen consumption, and greater hot-metal replacement. The technology is recommended for converter shops.

Journal

Coke and Chemistry – Springer Journals

Published: May 27, 2010

There are no references for this article.