Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/turbojet-test-cell-and-noise-impact-assessment-in-the-vicinity-of-XFYXvlkJVG
References (9)
-
(2012)
Vorläufige Berechnungsmethode zur Ermit - tlung der Belastetenzahlen durch Umgebungslärm – VBEB -
D. González, J. Morillas, G. Gozalo (2015)
The influence of microphone location on the results of urban noise measurementsApplied Acoustics, 90
-
G. Licitra, E. Ascari, G. Brambilla (2010)
Comparative analysis of methods to evaluate noise exposure and annoyance of people -
J. Piercy (1994)
The draft international standard method (ISO/DIS 9613-2) for calculating the attenuation of sound during propagation outdoorsCanadian Acoustics, 22
-
(2007)
Gas turbine engine testing at Western Michigan University -
M. Ögren, T. Jerson, E. Öhrström, A. Gunnarsson (2012)
Difference between Using 2 and 4 Meter Receiver Height in Railway Noise Prediction -
C. Leong, J. Jacob, W. Liou (2004)
Development of a turbojet engine lab for propulsion education -
(2016)
A case study of the effect of assessment height of the end noise indicators on the estimation of population exposure to road traffic noise -
Directive 2002/49/EC of the European Parliament and of the Council of 25
- Publisher
- Springer Journals
- Copyright
- Copyright © 2018 by Australian Acoustical Society
- Subject
- Engineering; Engineering Acoustics; Acoustics; Noise Control
- ISSN
- 0814-6039
- eISSN
- 1839-2571
- DOI
- 10.1007/s40857-018-0134-y
- Publisher site
- See Article on Publisher Site
Abstract
In this paper, the noise impact of a turbojet testing cell on the adjacent community is investigated. There are scenarios in which the noise from two different turbo engines is analysed. For the noise impact study, acoustic measurements were taken in the test cell to obtain the transmission loss of the three silencers of the test cell. To allow testing of high-power turbojets as Viper or R-11F-300 Tumansky, the test cell was restored and relocated to minimize the noise impact on the surrounding area. The study presents the affected buildings and the number of inhabitants exposed to noise that is assessed according to a German VBEB method based on noise level at façade of the buildings. The study presents the calculus methodologies of the acoustic propagation according ISO 9613-2 on the surrounding area and the noise limits according to the national legislation. To reduce the conflict areas, a technical solution for the intake silencer is proposed.
Journal
Acoustics Australia – Springer Journals
Published: Jun 27, 2018