Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

The effects of heating rate and sintering temperature on the strength, firing shrinkage, and bulk density of porcelain tiles

The effects of heating rate and sintering temperature on the strength, firing shrinkage, and bulk... In this study, the effects of heating rate and sintering temperature on the strength, firing shrinkage, and bulk density of porcelain tiles are investigated. Experiments were designed as a 32 full-factorial experimental design, with the individual effects of two main factors and their interaction being determined. Strength, firing shrinkage, and bulk density values were analyzed using a MINITAB 17 statistical software program. It was found that the interaction of heating rate*sintering temperature affects strength, firing shrinkage, and bulk density values and that as a main factor, the effect of sintering temperature is significant. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of the Australian Ceramic Society Springer Journals

The effects of heating rate and sintering temperature on the strength, firing shrinkage, and bulk density of porcelain tiles

Loading next page...
 
/lp/springer-journals/the-effects-of-heating-rate-and-sintering-temperature-on-the-strength-JzKXNCaIhL
Publisher
Springer Journals
Copyright
Copyright © 2017 by Australian Ceramic Society
Subject
Materials Science; Ceramics, Glass, Composites, Natural Materials; Materials Engineering; Inorganic Chemistry
ISSN
2510-1560
eISSN
2510-1579
DOI
10.1007/s41779-017-0124-9
Publisher site
See Article on Publisher Site

Abstract

In this study, the effects of heating rate and sintering temperature on the strength, firing shrinkage, and bulk density of porcelain tiles are investigated. Experiments were designed as a 32 full-factorial experimental design, with the individual effects of two main factors and their interaction being determined. Strength, firing shrinkage, and bulk density values were analyzed using a MINITAB 17 statistical software program. It was found that the interaction of heating rate*sintering temperature affects strength, firing shrinkage, and bulk density values and that as a main factor, the effect of sintering temperature is significant.

Journal

Journal of the Australian Ceramic SocietySpringer Journals

Published: Sep 16, 2017

References