Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/the-application-of-gas-plasma-technologies-in-surface-modification-of-1r3kJu7ned
References (35)
-
C. Jia, Ping Chen, Qian Wang, Bin Li, Mingxin Chen (2012)
Wetting and adhesion behavior of armos fibers after dielectric barrier discharge plasma treatmentJournal of Applied Polymer Science, 125
-
Lu Liu, Qiuran Jiang, T. Zhu, X. Guo, Yushan Sun, Y. Guan, Y. Qiu (2006)
Influence of moisture regain of aramid fibers on effects of atmospheric pressure plasma treatment on improving adhesion with epoxyJournal of Applied Polymer Science, 102
-
G. Shed, T. Lin, S. Shyu, J. Lai (1994)
Improvement of adhesion of Kevlar fiber to epoxy by chemical modificationJournal of Adhesion Science and Technology, 8
-
C. Jia, Ping Chen, Wei Liu, Bin Li, Qian Wang (2011)
Surface treatment of aramid fiber by air dielectric barrier discharge plasma at atmospheric pressureApplied Surface Science, 257
-
P J C Chappell J R Brown (1991)
10.1007/BF02402964J. Mater. Sci., 26
-
Jie Sun, Lan Yao, Shiyuan Sun, Y. Qiu (2011)
ESR study of atmospheric pressure plasma jet irradiated aramid fibersSurface & Coatings Technology, 205
-
U. Rashed, H. Ahmed, A. Alhalwagy, A. Garamoon (2009)
Surface characteristics and printing properties of PET fabric treated by atmospheric dielectric barrier discharge plasmaEuropean Physical Journal-applied Physics, 45
-
Yu Ren, Chunxia Wang, Y. Qiu (2007)
Influence of aramid fiber moisture regain during atmospheric plasma treatment on aging of treatment effects on surface wettability and bonding strength to epoxyApplied Surface Science, 253
-
C. Jia, Ping Chen, Bin Li, Qian Wang, Chun Lu, Qi Yu (2010)
Effects of Twaron fiber surface treatment by air dielectric barrier discharge plasma on the interfacial adhesion in fiber reinforced compositesSurface & Coatings Technology, 204
-
J. Brown, P. Chappell, Z. Mathys (1991)
Plasma surface modification of advanced organic fibresJournal of Materials Science, 26
-
A. Garamoon, D. El-zeer (2009)
Atmospheric pressure glow discharge plasma in air at frequency 50 HzPlasma Sources Science and Technology, 18
-
Ping Chen, Jing Wang, Baichen Wang, Wei Li, Chengshuang Zhang, Hong Li, Baolei Sun (2009)
Improvement of interfacial adhesion for plasma‐treated aramid fiber‐reinforced poly(phthalazinone ether sulfone ketone) composite and fiber surface aging effectsSurface and Interface Analysis, 41
-
M. Xi, Yulia Li, Shuyong Shang, Dai-Hong Li, Yongxiang Yin, X. Dai (2008)
Surface modification of aramid fiber by air DBD plasma at atmospheric pressure with continuous on-line processingSurface & Coatings Technology, 202
-
G. Sheu, S. Shyu (1994)
Surface modification of Kevlar 149 fibers by gas plasma treatmentJournal of Adhesion Science and Technology, 8
-
Fpm Mercx, Pj Lemstra (1990)
Surface modification of aramid fibersPolymer communications, 31
-
J. Kalantar, L. Drzal (1990)
The bonding mechanism of aramid fibres to epoxy matricesJournal of Materials Science, 25
-
A. Garamoon, D. El-zeer, A. Ghany, D. Ghoneem, F. El-Hossary (2011)
Influences of the barrier types and arrangements on dielectric barrier discharge characteristicsEuropean Physical Journal-applied Physics, 53
-
Masaru Mori, Y. Uyama, Y. Ikada (1994)
Surface modification of aramid fibre by graft polymerizationPolymer, 35
-
Tie-Min Liu, Yuansuo Zheng, Jie Hu (2010)
Surface modification of Aramid fibers with new chemical method for improving interfacial bonding strength with epoxy resinJournal of Applied Polymer Science, 118
-
Qi Wang, S. Kaliaguine, A. Ait-Kadi (1993)
Catalytic grafting: A new technique for polymer‐fiber composites. III. Polyethylene‐plasma‐treated KevlarTM fibers composites: Analysis of the fiber surfaceJournal of Applied Polymer Science, 48
-
G. Sheu, S. Shyu (1994)
Surface properties and interfacial adhesion studies of aramid fibres modified by gas plasmasComposites Science and Technology, 52
-
Jing Wang, Ping Chen, Wei Liu, Hong Li, C. Jia, Chun Lu, Baichen Wang (2011)
Surface modification of armos fibers with oxygen plasma treatment for improving interfacial adhesion with poly(phthalazinone ether sulfone ketone) resinJournal of Applied Polymer Science, 121
-
Zheng-De Zhang, Hongjun Liang, Xiao-huai Hou, Yunzhao Yu (2001)
Plasma surface modification of poly(m-aramide) fabric for adhesion improvement to fluorosilicone rubberJournal of Adhesion Science and Technology, 15
-
R. Day, K. Hewson, P. Lovell (2002)
Surface modification and its effect on the interfacial properties of model aramid-fibre/epoxy compositesComposites Science and Technology, 62
-
X. Chen, Lan Yao, J. Xue, Dongyuan Zhao, Y. Lan, X. Qian, Changhua Wang, Y. Qiu (2008)
Plasma penetration depth and mechanical properties of atmospheric plasma-treated 3D aramid woven compositesApplied Surface Science, 255
-
Y. Hwang, Y. Qiu, C. Zhang, B. Jarrard, R. Stedeford, J. Tsai, Y. Park, M. McCord (2003)
Effects of atmospheric pressure helium/air plasma treatment on adhesion and mechanical properties of aramid fibersJournal of Adhesion Science and Technology, 17
-
G. Sheu, S. Shyu (1994)
Surface modification of Kevlar 149 fibers by gas plasma treatment. Part II. Improved interfacial adhesion to epoxy resinJournal of Adhesion Science and Technology, 8
-
Lu Zhu, Weihua Teng, Helan Xu, Yan Liu, Qiuran Jiang, Chunxia Wang, Y. Qiu (2008)
Effect of absorbed moisture on the atmospheric plasma etching of polyamide fibersSurface & Coatings Technology, 202
-
Min Su, A. Gu, G. Liang, L. Yuan (2011)
The effect of oxygen-plasma treatment on Kevlar fibers and the properties of Kevlar fibers/bismaleimide compositesApplied Surface Science, 257
-
Rongzhi Li, L. Ye, Y. Mai (1997)
Application of plasma technologies in fibre-reinforced polymer composites: a review of recent developmentsComposites Part A-applied Science and Manufacturing, 28
-
Ruxi Gu, Junrong Yu, Chengcheng Hu, Lei Chen, Jing Zhu, Zuming Hu (2012)
Surface treatment of para-aramid fiber by argon dielectric barrier discharge plasma at atmospheric pressureApplied Surface Science, 258
-
P J C Chappell J R Brown (1992)
10.1007/BF00576300J. Mater. Sci., 27
-
J. Brown, Z. Mathys (1997)
Plasma surface modification of advanced organic fibres: Part V Effects on the mechanical properties of aramid/phenolic compositesJournal of Materials Science, 32
-
C. Jia, Ping Chen, Ping Chen, Qian Wang, Bin Li, Mingxin Chen (2011)
Surface wettability of atmospheric dielectric barrier discharge processed Armos fibersApplied Surface Science, 258
-
P. Lange, P. Akker (2012)
Adhesion Activation of Twaron Aramid Fibers for Application in Rubber: Plasma Versus Chemical TreatmentJournal of Adhesion Science and Technology, 26
- Publisher
- Springer Journals
- Copyright
- 2014 The Korean Fiber Society and Springer Science+Business Media Dordrecht
- ISSN
- 1229-9197
- eISSN
- 1875-0052
- DOI
- 10.1007/s12221-014-0001-x
- Publisher site
- See Article on Publisher Site
Abstract
Abstract Gas plasma technologies have been utilized to improve the surface properties of fibers in many applications from textiles to fiber-reinforced composites since the 1960s. This review discusses the feasibility and characteristics of gas plasma technologies applied to aramid fiber. The influence of various plasma treatments on the chemical and mechanical properties of aramid fibers as well as fiber-reinforced composites is described. The moisture regain is emphasized to achieve good bonding between aramid fibers and polymer matrix and to enhance the surface modification of aramid fiber and mechanical properties of the composites. More sophisticated technologies such as plasma-initiated graft polymerization are also discussed to highlight very recent developments.
Journal
Fibers and Polymers – Springer Journals
Published: Jan 1, 2014
Keywords: Polymer Sciences