Access the full text.
Sign up today, get DeepDyve free for 14 days.
TF Yi, XG Hu (2007)
Preparation and characterization of sub-micro LiNi0.5−x Mn1.5+x O4 for 5 V cathode materials synthesized by an ultrasonic-assisted co-precipitation methodJ Power Sources, 167
J. Barker, R. Gover, P. Burns, A. Bryan (2007)
The Effect of Al Substitution on the Electrochemical Insertion Properties of the Lithium Vanadium Phosphate, Li3V2 ( PO4 ) 3Journal of The Electrochemical Society, 154
Yinghua Chen, Yanming Zhao, X. An, Jianmin Liu, Youzhong Dong, Lingling Chen (2009)
Preparation and electrochemical performance studies on Cr-doped Li3V2(PO4)3 as cathode materials for lithium-ion batteriesElectrochimica Acta, 54
Xuechou Zhou, Yongmei Liu, Yonglang Guo (2009)
Effect of reduction agent on the performance of Li3V2(PO4)3/C positive material by one-step solid-state reactionElectrochimica Acta, 54
Anqiang Pan, D. Choi, J. Zhang, S. Liang, G. Cao, Z. Nie, B. Arey, Jun Liu (2011)
High-rate cathodes based on Li3V2(PO4)3 nanobelts prepared via surfactant-assisted fabricationJournal of Power Sources, 196
CS Dai, ZY Chen, HZ Jin, XG Hu (2010)
Synthesis and performance of Li3(V1−x Mg x )2(PO4)3 cathode materialsJ Power Sources, 195
Q. Kuang, Yanming Zhao, X. An, Jianmin Liu, Youzhong Dong, Lingling Chen (2010)
Synthesis and electrochemical properties of Co-doped Li3V2(PO4)3 cathode materials for lithium-ion batteriesElectrochimica Acta, 55
M. Prabu, S. Selvasekarapandian, A. Kulkarni, S. Karthikeyan, G. Hirankumar, C. Sanjeeviraja (2011)
Structural, dielectric, and conductivity studies of yttrium-doped LiNiPO4 cathode materialsIonics, 17
SC Yin, PS Strobel, H Grondey, LF Nazar (2004)
A room-temperature analogue to the fast-ion conducting high-temperature γ-phase of Li3V2(PO4)3Chem Mater, 16
Yurong Zhang, Yanyan Zhao (2011)
Enhanced electrochemical properties of LiMnPO4/C via Li-site substitution with MgIonics, 17
Yanyan Sun, Yifu Yang, Hui Zhan, Huixia Shao, Yunhong Zhou (2010)
Synthesis of high power type LiMn1.5Ni0.5O4 by optimizing its preparation conditionsJournal of Power Sources, 195
A. Padhi, K. Nanjundaswamy, C. Masquelier, J. Goodenough (1997)
Mapping of Transition Metal Redox Energies in Phosphates with NASICON Structure by Lithium Intercalation.ChemInform, 28
Huan Huang, S. Yin, T. Kerr, N. Taylor, L. Nazar (2002)
Nanostructured Composites: A High Capacity, Fast Rate Li3V2(PO4)3/Carbon Cathode for Rechargeable Lithium BatteriesAdvanced Materials, 14
Changsong Dai, Zhenyu Chen, Haizu Jin, Xin-guo Hu (2010)
Synthesis and performance of Li3(V1−xMgx)2(PO4)3 cathode materialsJournal of Power Sources, 195
Tingfeng Yi, Xin-guo Hu (2007)
Preparation and characterization of sub-micro LiNi0.5−xMn1.5+xO4 for 5 V cathode materials synthesized by an ultrasonic-assisted co-precipitation methodJournal of Power Sources, 167
S. Yin, H. Grondey, P. Strobel, M. Anne, L. Nazar (2003)
Electrochemical Property: Structure Relationships in Monoclinic Li3-yV2(PO4)3.ChemInform, 34
JS Huang, L Yang, KY Liu, YF Tang (2010)
Synthesis and characterization of Li3V(2−2x/3)Mg x (PO4)3/C cathode material for lithium-ion batteriesJ Power Sources, 195
A. Padhi, K. Nanjundaswamy, J. Goodenough (1997)
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium BatteriesJournal of The Electrochemical Society, 144
P. Herle, B. Ellis, N. Coombs, L. Nazar (2004)
Nano-network electronic conduction in iron and nickel olivine phosphatesNature Materials, 3
M. Ren, Zhen Zhou, Xueping Gao, W. Peng, Jinping Wei (2008)
Core−Shell Li3V2(PO4)3@C Composites as Cathode Materials for Lithium-Ion BatteriesJournal of Physical Chemistry C, 112
Luming Zhang, X. Wang, J. Xiang, Yu Zhou, S. Shi, J. Tu (2010)
Synthesis and electrochemical performances of Li3V2(PO4)3/(Ag + C) composite cathodeJournal of Power Sources, 195
S. Yin, H. Grondey, P. Strobel, M. Anne, L. Nazar (2003)
Electrochemical property: Structure relationships in monoclinic Li(3-y)V2(PO4)3.Journal of the American Chemical Society, 125 34
S. Yin, P. Strobel, H. Grondey, L. Nazar (2004)
Li2.5V2(PO4)3: A Room-Temperature Analogue to the Fast-Ion Conducting High-Temperature γ-Phase of Li3V2(PO4)3.ChemInform, 35
T. Jiang, W. Pan, Jian Wang, Xiao-fei Bie, Fei Du, Yingjin Wei, Chunzhong Wang, Gang Chen (2010)
Carbon coated Li3V2(PO4)3 cathode material prepared by a PVA assisted sol–gel methodElectrochimica Acta, 55
K. Amine, H. Yasuda, M. Yamachi (2000)
Olivine LiCoPO4 as 4.8 V Electrode Material for Lithium Batteries.ChemInform, 31
Jiawei Wang, Xianfa Zhang, Jing Liu, Guiling Yang, Yucui Ge, Zijia Yu, Rongshun Wang, X. Pan (2010)
Long-term cyclability and high-rate capability of Li3V2(PO4)3/C cathode material using PVA as carbon sourceElectrochimica Acta, 55
Y. Qiao, Xiuli Wang, Y. Zhou, J. Xiang, Dan Zhang, S. Shi, J. Tu (2010)
Electrochemical performance of carbon-coated Li3V2(PO4)3 cathode materials derived from polystyrene-based carbon-thermal reduction synthesisElectrochimica Acta, 56
X. Rui, Cang Li, Juei Liu, T. Cheng, C. Chen (2010)
The Li3V2(PO4)3/C composites with high-rate capability prepared by a maltose-based sol–gel routeElectrochimica Acta, 55
T. Jiang, Yingjin Wei, W. Pan, Zhifang Li, Xing Ming, Gang Chen, C. Wang (2010)
Preparation and Electrochemical Studies of Li3V2(PO4)3/Cu Composite Cathode Material for Lithium Ion Batteries.ChemInform, 41
Jing Zhai, Min-shou Zhao, Dandan Wang, Y. Qiao (2010)
Effect of MgO nanolayer coated on Li3V2(PO4)3/C cathode material for lithium-ion batteryJournal of Alloys and Compounds, 502
C. Delacourt, P. Poizot, M. Morcrette, J. Tarascon, C. Masquelier (2004)
One-Step Low-Temperature Route for the Preparation of Electrochemically Active LiMnPO4 PowdersChemistry of Materials, 16
Shengkui Zhong, Jian Wang, Letong Liu, Jie-qun Liu, Yanwei Li (2010)
Investigations on the synthesis and electrochemical performance of Li3V2(PO4)3/C by different methodsIonics, 16
†. Yin, P. Strobel, §‖ Grondey, L. Nazar (2004)
Li2.5V2(PO4)3: A Room-Temperature Analogue to the Fast-Ion Conducting High-Temperature γ-Phase of Li3V2(PO4)3Chemistry of Materials, 16
Y. Qiao, Xiuli Wang, J. Xiang, Dan Zhang, Wen-juan Liu, J. Tu (2011)
Electrochemical performance of Li3V2(PO4)3/C cathode materials using stearic acid as a carbon sourceElectrochimica Acta, 56
Yuzhan Li, Zhen Zhou, Xueping Gao, Jie Yan (2007)
A promising sol–gel route based on citric acid to synthesize Li3V2(PO4)3/carbon composite material for lithium ion batteriesElectrochimica Acta, 52
Jiawei Wang, Jing Liu, Guiling Yang, Xianfa Zhang, Xuedong Yan, X. Pan, Rongshun Wang (2009)
Electrochemical performance of Li3V2(PO4)3/C cathode material using a novel carbon sourceElectrochimica Acta, 54
J. Huang, Libin Yang, Ke Liu, Yufeng Tang (2010)
Synthesis and characterization of Li3V(2 − 2x/3)Mgx(PO4)3/C cathode material for lithium-ion batteriesJournal of Power Sources, 195
Tingfeng Yi, Xin-guo Hu, K. Gao (2006)
Synthesis and physicochemical properties of LiAl0.05Mn1.95O4 cathode material by the ultrasonic-assisted sol–gel methodJournal of Power Sources, 162
M. Ren, Zhen Zhou, Yuzhan Li, X. Gao, Jie Yan (2006)
Preparation and electrochemical studies of Fe-doped Li3V2(PO4)3 cathode materials for lithium-ion batteriesJournal of Power Sources, 162
E. Flint, K. Suslick (1991)
The Temperature of CavitationScience, 253
A novel ultrasonic-assisted sol–gel method is proposed to prepare Li3V2(PO4)3/C cathode material. X-ray diffraction analyses show that both Li3V2(PO4)3/C(A) synthesized by the ultrasonic-assisted sol–gel method and Li3V2(PO4)3/C(B) synthesized by a traditional sol–gel method have monoclinic structure. Scanning electron microscopy images indicate that the Li3V2(PO4)3/C(A) composite has a more uniform morphology than that of the Li3V2(PO4)3/C(B) composite. In the voltage range of 3.0–4.3 V (vs. Li/Li+), the initial specific discharge capacities of the Li3V2(PO4)3/C(A) and Li3V2(PO4)3/C(B) samples are 129.8 and 125.9 mAh g−1 at 1C rate (1C = 133 mA g−1), respectively. Furthermore, at 2-C charge/10-C discharge rate, the specific discharge capacity of the Li3V2(PO4)3/C(A) composite retains 113.2 mAh g−1 after 50 cycles, but the Li3V2(PO4)3/C(B) composite only presents a capacity of 94.8 mAh g−1.
Ionics – Springer Journals
Published: Dec 11, 2011
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.