Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Surface Acoustic Wave Characteristics with a Layered Structure of IDT/θ° YX-LiTaO3/SiO2/AlN/diamond

Surface Acoustic Wave Characteristics with a Layered Structure of IDT/θ° YX-LiTaO3/SiO2/AlN/diamond A new layered surface acoustic wave (SAW) structure was proposed by Murata Co., Ltd recently. It was reported that such structure could achieve an incredible high performance including a higher quality factor Q and electromechanical coupling coefficient K2. For deeply understanding propagating characteristics and optimizing the performance of the SAWs in such structure, a layered structure of IDT/θ° YX-LiTaO3/SiO2/AlN/Diamond with different structural parameters were theoretically investigated by FEM method. The calculated admittance shows that four eigenmodes simultaneously exist in such layered structure including the main mode SH SAW. And compared with the Traditional SAW structure, the main mode could achieve a higher value of K2 with sacrificing its velocity a little. Different metal layers (Au, Al, and Cu) were examined as the electrode material. With Au employed, the K2 of the main mode is a little larger resulting from better suppression of the spurious modes. The optimum thickness of electrode and piezoelectric layer are 0.2 and 0.02λ, respectively. In this case, the K2 for the SH SAW achieves its maximum value of 12.20% with a large phase velocity of 3608 m/s. Furthermore, the pure SH SAW can be obtained with the Y-cut Euler angle θ from 0° to 60°, where its K2 has a wide range of 8.70 to 13.69%. Consequently, the work provides a theoretical guide for designing SAW devices of different bandwidth and operation frequency with such structure. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Acoustical Physics Springer Journals

Surface Acoustic Wave Characteristics with a Layered Structure of IDT/θ° YX-LiTaO3/SiO2/AlN/diamond

Acoustical Physics , Volume 65 (6) – Nov 10, 2019

Loading next page...
 
/lp/springer-journals/surface-acoustic-wave-characteristics-with-a-layered-structure-of-idt-rmmJbsSNBy

References (13)

Publisher
Springer Journals
Copyright
Copyright © Pleiades Publishing, Ltd. 2019
ISSN
1063-7710
eISSN
1562-6865
DOI
10.1134/S1063771019060150
Publisher site
See Article on Publisher Site

Abstract

A new layered surface acoustic wave (SAW) structure was proposed by Murata Co., Ltd recently. It was reported that such structure could achieve an incredible high performance including a higher quality factor Q and electromechanical coupling coefficient K2. For deeply understanding propagating characteristics and optimizing the performance of the SAWs in such structure, a layered structure of IDT/θ° YX-LiTaO3/SiO2/AlN/Diamond with different structural parameters were theoretically investigated by FEM method. The calculated admittance shows that four eigenmodes simultaneously exist in such layered structure including the main mode SH SAW. And compared with the Traditional SAW structure, the main mode could achieve a higher value of K2 with sacrificing its velocity a little. Different metal layers (Au, Al, and Cu) were examined as the electrode material. With Au employed, the K2 of the main mode is a little larger resulting from better suppression of the spurious modes. The optimum thickness of electrode and piezoelectric layer are 0.2 and 0.02λ, respectively. In this case, the K2 for the SH SAW achieves its maximum value of 12.20% with a large phase velocity of 3608 m/s. Furthermore, the pure SH SAW can be obtained with the Y-cut Euler angle θ from 0° to 60°, where its K2 has a wide range of 8.70 to 13.69%. Consequently, the work provides a theoretical guide for designing SAW devices of different bandwidth and operation frequency with such structure.

Journal

Acoustical PhysicsSpringer Journals

Published: Nov 10, 2019

There are no references for this article.