Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/structure-improvement-and-strength-finite-element-analysis-of-vhp-njtHutWjL6
References (16)
-
35 Calculation results of stress ratio eq3 =ð t 0:2 Þ of the welded seam and heat affected zone of improved structure of the VHP welded rotor during the shutdown process -
Z Y Peng O Huang (2010)
Analysis of the economic benefit of 700�C high temperature ultra-super-critical technologyThermal Turbine, 39
-
Huang Shu-hong (2012)
Status Quo of the Design and Development of 700 ℃ Ultra-supercritical Coal-fired Power Generator Unit SystemsJournal of Engineering for Thermal Energy and Power
-
(2010)
Analysis of the economic benefit of 700°C high temperature ultra-super-critical technology. Thermal Turbine -
(2010)
National 700°C coal fired generating technology innovation alliance -
R C Zhou S D Ji (2011)
Research and development status and localizations of recommendations of 700�C grade advanced ultrasuper- critical power generation technologyThermal Power Generation, 40
-
(2003)
Materials development for boilers and steam turbines operating at 700 DGC -
R. Blum, S. Kjaer, J. Bugge (2007)
Development of a PF fired high efficiency power plant (AD700) -
(2008)
AD700 innovation pave the way for 53 percent efficiency -
Li Y S. National (2010)
07?23, www -
(2011)
Program for advanced ultra-super-critical (A-USC) coal fired power plants -
G. Wei (2012)
Design and Exergy Analysis on Thermodynamic System of a 700 ℃ Ultra Supercritical Coal-fired Power Generating SetJournal of Chinese Society of Power Engineering
-
(2011)
Life Prediction and Reliability of Large Capacity Steam Turbine -
(2014)
Reliability prediction and safety operation theory and methods of large capacity generating units -
(2011)
Research and development status and localizations of recommendations of 700°C grade advanced ultrasuper-critical power generation technology. Thermal Power Generation -
(2005)
Siemens steam turbine design for AD700 power plants
- Publisher
- Springer Journals
- Copyright
- 2016 Higher Education Press and Springer-Verlag Berlin Heidelberg
- ISSN
- 2095-1701
- eISSN
- 2095-1698
- DOI
- 10.1007/s11708-015-0387-1
- Publisher site
- See Article on Publisher Site
Abstract
Abstract The optimized structure strength design and finite element analysis method for very high pressure (VHP) rotors of the 700°C ultra-super-critical (USC) steam turbine are presented. The main parameters of steam and the steam thermal parameters of blade stages of VHP welded rotors as well as the start and shutdown curves of the steam turbine are determined. The structure design feature, the mechanical models and the typical position of stress analysis of the VHP welded rotors are introduced. The steady and transient finite element analysis are implemented for steady condition, start and shutdown process, including steady rated condition, 110% rated speed, 120% rated speed, cold start, warm start, hot start, very hot start, sliding-pressure shutdown, normal shutdown and emergency shutdown, to obtain the temperature and stress distribution as well as the stress ratio of the welded rotor. The strength design criteria and strength analysis results of the welded rotor are given. The results show that the strength design of improved structure of the VHP welded rotor of the 700°C USC steam turbine is safe at the steady condition and during the transient start or shutdown process.
Journal
"Frontiers in Energy" – Springer Journals
Published: Mar 1, 2016