Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Relative humidity of outlet air: the key parameter to optimize moisture content and water activity of dairy powders

Relative humidity of outlet air: the key parameter to optimize moisture content and water... The most widely used technique for dehydration of dairy products is spray drying. This is an effective method for preserving biological products as it does not involve severe heat treatment and allows storage of powders at an ambient temperature. The maximum moisture content of a dairy powder (max 4% for skim milk powder) is defined in the product specification in relation to the water activity, and this must be close to 0.2 at 25 °C for optimum preservation. From an economic point of view, it is very important to operate as closely as possible to this limit. Many dairy manufacturers and researchers have demonstrated and reported that powder moisture is related to the outlet air temperature, but this is not always true. The aims of this study were to evaluate the direct and indirect relationships between outlet air temperature and moisture content of skim milk powder in relation to the spray-drying parameters (concentrate mass flow rate, absolute humidity of inlet air and inlet air temperature) using a thermodynamic approach. Our experiments showed that moisture content of skim milk powder can be close to 5.1 ± 0.0% with variations in outlet air temperature of 77 to 87 °C. Other experiments showed that the powder moisture content can vary from 4.6 ± 0.0% to 5.2 ± 0.0% even when the outlet air temperature remains close to 86 ± 1 °C. These results indicate that there is no direct relationship between outlet air temperature and powder moisture content. It is preferable to use the Enthalpic Mollier-Ramzine diagram of wet air and certain transfer equations related to the Fick and Fourier laws to demonstrate that the powder moisture content is directly related to the relative humidity (RH) of the outlet air. The moisture content and water activity of skim milk powder were close to 5.1 ± 0.0% and 0.27 ± 0.01 for outlet air RH close to 7.0 ± 0.1%, respectively, whatever the other drying parameter values. We demonstrated in this study that control of the RH of the outlet air is at least as important as control of the outlet air temperature to optimize the moisture content of a dairy powder, regardless of the absolute humidity of the inlet air, concentrate mass flow rate or inlet air temperature. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Dairy Science & Technology Springer Journals

Relative humidity of outlet air: the key parameter to optimize moisture content and water activity of dairy powders

Download PDF
8 pages

Loading next page...
 
/lp/springer-journals/relative-humidity-of-outlet-air-the-key-parameter-to-optimize-moisture-0zTXa8p7sR
Publisher
Springer Journals
Copyright
Copyright © 2008 by Springer S+B Media B.V.
Subject
Chemistry; Food Science; Agriculture; Microbiology
ISSN
1958-5586
eISSN
1958-5594
DOI
10.1051/dst:2007007
Publisher site
See Article on Publisher Site

Abstract

The most widely used technique for dehydration of dairy products is spray drying. This is an effective method for preserving biological products as it does not involve severe heat treatment and allows storage of powders at an ambient temperature. The maximum moisture content of a dairy powder (max 4% for skim milk powder) is defined in the product specification in relation to the water activity, and this must be close to 0.2 at 25 °C for optimum preservation. From an economic point of view, it is very important to operate as closely as possible to this limit. Many dairy manufacturers and researchers have demonstrated and reported that powder moisture is related to the outlet air temperature, but this is not always true. The aims of this study were to evaluate the direct and indirect relationships between outlet air temperature and moisture content of skim milk powder in relation to the spray-drying parameters (concentrate mass flow rate, absolute humidity of inlet air and inlet air temperature) using a thermodynamic approach. Our experiments showed that moisture content of skim milk powder can be close to 5.1 ± 0.0% with variations in outlet air temperature of 77 to 87 °C. Other experiments showed that the powder moisture content can vary from 4.6 ± 0.0% to 5.2 ± 0.0% even when the outlet air temperature remains close to 86 ± 1 °C. These results indicate that there is no direct relationship between outlet air temperature and powder moisture content. It is preferable to use the Enthalpic Mollier-Ramzine diagram of wet air and certain transfer equations related to the Fick and Fourier laws to demonstrate that the powder moisture content is directly related to the relative humidity (RH) of the outlet air. The moisture content and water activity of skim milk powder were close to 5.1 ± 0.0% and 0.27 ± 0.01 for outlet air RH close to 7.0 ± 0.1%, respectively, whatever the other drying parameter values. We demonstrated in this study that control of the RH of the outlet air is at least as important as control of the outlet air temperature to optimize the moisture content of a dairy powder, regardless of the absolute humidity of the inlet air, concentrate mass flow rate or inlet air temperature.

Journal

Dairy Science & Technology – Springer Journals

Published: May 21, 2011

References

  • The use of carbonyl analysis to follow the main reactions involved in the process of deterioration of dehydrated dairy products: prediction of most favourable degree of dehydration
    Efstathiou, T.; Feuardent, C.; Méjean, S.; Schuck, P.
  • Spray Drying
    Masters, K.
  • Handbook of milk powder manufacture
    Pisecky, J.
  • Importance of glass transition and water activity to spray drying and stability of dairy powders
    Roos, Y.H.
  • Spray drying of dairy products: state of the art
    Schuck, P.
  • Thermohygrometric sensor: a tool for optimizing the spray drying process
    Schuck, P.; Méjean, S.; Dolivet, A.; Jeantet, R.
  • Caractérisation énergétique d’une tour de séchage par atomisation multiple effet
    Schuck, P.; Roignant, M.; Brulé, G.; Méjean, S.; Bimbenet, J.-J.
  • L’évolution du séchage par atomisation
    Sougnez, M.