Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Realization of Bluetooth piconet for real time monitoring of multiple parameters

Realization of Bluetooth piconet for real time monitoring of multiple parameters Biomed Eng Lett (2013) 3:95-101 DOI 10.1007/s13534-013-0092-0 ORIGINAL ARTICLE Realization of Bluetooth Piconet for Real Time Monitoring of Multiple Parameters Utpal T. Pandya, Uday B. Desai and Shabbir N. Merchant Received: 7 March 2013 / Revised: 28 May 2013 / Accepted: 25 June 2013 © The Korean Society of Medical & Biological Engineering and Springer 2013 TM Abstract Keywords Bluetooth , Piconet, Serial port profile (SPP), Purpose There are many applications where simultaneous Adhoc networking, Electrocardiogram (ECG) wireless transmission of many parameters is required to be sent to base station or to the receiver. For example, in case of mass causality events, monitoring of multiple patients by INTRODUCTION medical technicians, physicians or nurses is required where there will be more than one wireless transmitter and one Bluetooth based Wireless systems have been in development wireless receiver for the past few years [1-8], and also have been an interest Methods In this paper, to demonstrate and address the issue of many researchers due to its adaptability and availability in of such applications, an adhoc network is realized by many receiver devices like PDA/Laptop/Mobile etc. To detect formation of a piconet in the Bluetooth environment for the atrial fibrillation, the Bluetooth http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Biomedical Engineering Letters Springer Journals

Realization of Bluetooth piconet for real time monitoring of multiple parameters

Loading next page...
 
/lp/springer-journals/realization-of-bluetooth-piconet-for-real-time-monitoring-of-multiple-wRPe1jOR0t

References (35)

Publisher
Springer Journals
Copyright
Copyright © 2013 by Korean Society of Medical and Biological Engineering and Springer
Subject
Engineering; Biomedical Engineering; Biophysics and Biological Physics; Biomedicine general; Medical and Radiation Physics
ISSN
2093-9868
eISSN
2093-985X
DOI
10.1007/s13534-013-0092-0
Publisher site
See Article on Publisher Site

Abstract

Biomed Eng Lett (2013) 3:95-101 DOI 10.1007/s13534-013-0092-0 ORIGINAL ARTICLE Realization of Bluetooth Piconet for Real Time Monitoring of Multiple Parameters Utpal T. Pandya, Uday B. Desai and Shabbir N. Merchant Received: 7 March 2013 / Revised: 28 May 2013 / Accepted: 25 June 2013 © The Korean Society of Medical & Biological Engineering and Springer 2013 TM Abstract Keywords Bluetooth , Piconet, Serial port profile (SPP), Purpose There are many applications where simultaneous Adhoc networking, Electrocardiogram (ECG) wireless transmission of many parameters is required to be sent to base station or to the receiver. For example, in case of mass causality events, monitoring of multiple patients by INTRODUCTION medical technicians, physicians or nurses is required where there will be more than one wireless transmitter and one Bluetooth based Wireless systems have been in development wireless receiver for the past few years [1-8], and also have been an interest Methods In this paper, to demonstrate and address the issue of many researchers due to its adaptability and availability in of such applications, an adhoc network is realized by many receiver devices like PDA/Laptop/Mobile etc. To detect formation of a piconet in the Bluetooth environment for the atrial fibrillation, the Bluetooth

Journal

Biomedical Engineering LettersSpringer Journals

Published: Aug 1, 2013

There are no references for this article.