Access the full text.
Sign up today, get DeepDyve free for 14 days.
S. Kalidindi, S. Mohan, A. Rossi (2017)
Mechanical Characterization of Mesoscale Interfaces Using Indentation TechniquesJOM, 69
M. Oyen (2005)
Spherical indentation creep following ramp loadingJournal of Materials Research, 20
(2020)
Mechanics of polymers: viscoelasticity
H. Brinson, L. Brinson (2007)
Polymer Engineering Science and Viscoelasticity: An Introduction
En-Jui Lee, J. Radok (1960)
The Contact Problem for Viscoelastic BodiesJournal of Applied Mechanics, 27
W. Spitzig, O. Richmond (1979)
Effect of hydrostatic pressure on the deformation behavior of polyethylene and polycarbonate in tension and in compressionPolymer Engineering and Science, 19
Gang Huang, Bochu Wang, Hongbing Lu (2004)
Measurements of Viscoelastic Functions of Polymers in the Frequency-Domain Using NanoindentationMechanics of Time-Dependent Materials, 8
J. Weaver, S. Kalidindi (2016)
Mechanical characterization of Ti-6Al-4V titanium alloy at multiple length scales using spherical indentation stress-strain measurementsMaterials & Design, 111
Jakes Joseph, R. Lakes, D. Stone (2012)
Broadband nanoindentation of glassy polymers: Part II. ViscoplasticityJournal of Materials Research, 27
Brendan Donohue, A. Ambrus, S. Kalidindi (2012)
Critical evaluation of the indentation data analyses methods for the extraction of isotropic uniaxial mechanical properties using finite element modelsActa Materialia, 60
Gang Huang, Hongbing Lu (2007)
Measurement of Young’s relaxation modulus using nanoindentationMechanics of Time-Dependent Materials, 10
Siddhartha Pathak, D. Stojakovic, R. Doherty, S. Kalidindi (2009)
Importance of surface preparation on the nano-indentation stress-strain curves measured in metalsJournal of Materials Research, 24
M. Gauthier (1995)
Engineered materials handbook
(2008)
dentation stress–strain curves. Acta Mater
Shraddha Vachhani, R. Doherty, S. Kalidindi (2013)
Effect of the continuous stiffness measurement on the mechanical properties extracted using spherical nanoindentationActa Materialia, 61
Dipen Patel, S. Kalidindi (2016)
Correlation of spherical nanoindentation stress-strain curves to simple compression stress-strain curves for elastic-plastic isotropic materials using finite element modelsActa Materialia, 112
K. Hemker, W. Sharpe (2007)
Microscale Characterization of Mechanical PropertiesAnnual Review of Materials Research, 37
D. Bahr, C. Watkins, D. Kramer, W. Gerberich (1998)
Yield Point Phenomena During IndentationMRS Proceedings, 522
E. Arruda, M. Boyce, R. Jayachandran (1995)
Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymersMechanics of Materials, 19
(2014)
Engineering Viscoelasticity
G. Graham (1965)
The contact problem in the linear theory of viscoelasticityInternational Journal of Engineering Science, 3
M. Cirnu (2010)
Linear Discrete Convolution And Its Inverse. Part 2. DeconvolutionJournal of Information Systems and Operations Management, 4
A. Jäger, R. Lackner (2008)
Identification of viscoelastic model parameters by means of cyclic nanoindentation testingInternational Journal of Materials Research, 99
S. Kalidindi, Siddhartha Pathak (2008)
Determination of the effective zero-point and the extraction of spherical nanoindentation stress–strain curvesActa Materialia, 56
Alexander Moseson, S. Basu, M. Barsoum (2008)
Determination of the effective zero point of contact for spherical nanoindentationJournal of Materials Research, 23
Siddhartha Pathak, D. Stojakovic, S. Kalidindi (2009)
Measurement of the local mechanical properties in polycrystalline samples using spherical nanoindentation and orientation imaging microscopyActa Materialia, 57
G. Huang, Hongbing Lu (2007)
Measurements of Two Independent Viscoelastic Functions by NanoindentationExperimental Mechanics, 47
Siddhartha Pathak, S. Kalidindi, C. Klemenz, N. Orlovskaya (2008)
Analyzing indentation stress–strain response of LaGaO3 single crystals using spherical indentersJournal of The European Ceramic Society, 28
(1970)
Schaum’s Outline of Continuum Mechanics
Siddhartha Pathak, S. Kalidindi (2015)
Spherical nanoindentation stress–strain curvesMaterials Science & Engineering R-reports, 91
K. Bouzakis, N. Michailidis, S. Hadjiyiannis, G. Skordaris, G. Erkens (2002)
Actual indenter tip geometries, material elastoplastic deformation laws and universal hardness
G. Pharr, J. Strader, W. Oliver (2009)
Critical issues in making small-depth mechanical property measurements by nanoindentation with continuous stiffness measurementJournal of Materials Research, 24
Nagamani Jaya, Zafir Alam (2013)
Small-scale mechanical testing of materials
Dipen Patel, S. Kalidindi (2017)
Estimating the slip resistance from spherical nanoindentation and orientation measurements in polycrystalline samples of cubic metalsInternational Journal of Plasticity, 92
B. Briscoe, L. Fiori, E. Pelillo (1998)
Nano-indentation of polymeric surfacesJournal of Physics D, 31
V. Srikar, S. Spearing (2003)
A critical review of microscale mechanical testing methods used in the design of microelectromechanical systemsExperimental Mechanics, 43
L. Cheng, X. Xia, L. Scriven, W. Gerberich (2005)
Spherical-tip indentation of viscoelastic materialMechanics of Materials, 37
Shraddha Vachhani, R. Doherty, S. Kalidindi (2016)
Studies of grain boundary regions in deformed polycrystalline aluminum using spherical nanoindentationInternational Journal of Plasticity, 81
K.D. Bouzakis, N. Michailidis, S. Hadjiyiannis, G. Skordaris, G. Erkens (2002)
Continuous FEM simulation of the nanoindentation: actual indenter tip geometries, material elastoplastic deformation laws and universal hardnessZ. Met.kd., 93
E. Martynova (2016)
Determination of the properties of viscoelastic materials using spherical nanoindentationMechanics of Time-Dependent Materials, 20
Zhong Zhou, Hongbing Lu (2010)
On the measurements of viscoelastic functions of a sphere by nanoindentationMechanics of Time-Dependent Materials, 14
S. Hunter (1960)
The Hertz problem for a rigid spherical indenter and a viscoelastic half-spaceJournal of The Mechanics and Physics of Solids, 8
D. Zill, M. Cullen (2021)
Advanced Engineering MathematicsTechnometrics, 63
T. Ting (1966)
The Contact Stresses Between a Rigid Indenter and a Viscoelastic Half-SpaceJournal of Applied Mechanics, 33
A. Fischer-Cripps (2000)
A review of analysis methods for sub-micron indentation testing☆Vacuum, 58
R. Lakes, A. Wineman (2006)
On Poisson’s Ratio in Linearly Viscoelastic SolidsJournal of Elasticity, 85
A. Khosravani, C. Caliendo, S. Kalidindi (2019)
New Insights into the Microstructural Changes During the Processing of Dual-Phase Steels from Multiresolution Spherical Indentation Stress–Strain ProtocolsMetals
Yang-Tse Cheng, Che-Min Cheng (2005)
Relationships between initial unloading slope, contact depth, and mechanical properties for conical indentation in linear viscoelastic solidsJournal of Materials Research, 20
(2010)
10: Standard Test Method for Compressive Properties of Rigid Plastics
G. Odegard, T. Gates, H. Herring (2005)
Characterization of viscoelastic properties of polymeric materials through nanoindentationExperimental Mechanics, 45
R. Caddell, R. Raghava, A. Atkins (1974)
Pressure dependent yield criteria for polymersMaterials Science and Engineering, 13
En-Jui Lee (1956)
Stress Analysis in Viscoelastic MaterialsJournal of Applied Physics, 27
Xiaodong Li, B. Bhushan (2002)
A Review of Nanoindentation Continuous Stiffness Measurement Technique and Its ApplicationsMaterials Characterization, 48
Spherical nanoindentation has been used successfully to extract meaningful indentation stress-strain curves in hard materials such as metals and ceramics. These methods have not yet been applied on viscoelastic-viscoplastic polymer samples. This study explores the potential of the current spherical nanoindentation analysis protocols in extracting indentation stress-strain curves and viscoelastic properties on samples exhibiting time-dependent material response at room temperature. These new protocols were tested on polymethyl methacrylate, polycarbonate, and low-density polyethylene. The properties extracted under different loading rates and indenter tip sizes conditions were observed to be consistent. It is further demonstrated that it is possible to recover the compression stress-strain curves for polymethyl methacrylate and low-density polyethylene from the measured indentation stress-strain curves. This study establishes some of the foundations needed for the development of protocols needed to reliably investigate the local time-dependent mechanical response of materials using spherical nanoindentation.
Mechanics of Time-Dependent Materials – Springer Journals
Published: Mar 1, 2022
Keywords: Nanoindentation; Viscoelasticity; Stress-strain; Microscale; Finite element analysis
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.