Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Preparation of LiFePO4/C via high-temperature ball-milling route and Box-Behnken design-based optimization

Preparation of LiFePO4/C via high-temperature ball-milling route and Box-Behnken design-based... LiFePO4/C cathode material was prepared via high-temperature ball-milling route with ultrasonic dispersion as mixing process using eutectic molten salt (0.76 LiOH·H2O-0.24 Li2CO3) as lithium source. Box-Behnken design was used to study the combined effects of ultrasonic time, ball-milling temperature, and ball-milling time on the discharge capacity to obtain the optimum predicted conditions. The optimum conditions were as follows: ultrasonic time was 63 min, ball-milling temperature was 638 °C, and ball-milling time was 7 h. LiFePO4/C prepared from the optimized experimental conditions exhibited a well electrochemical performance; its discharge capacity was 161.3 mAh g−1 at a 0.1 C-rate which was in consistence with the predicted discharge capacity of 160.2 mAh g−1. Moreover, its capacity retention rate achieved 93.6% at a 10 C-rate over 100 cycles. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Ionics Springer Journals

Preparation of LiFePO4/C via high-temperature ball-milling route and Box-Behnken design-based optimization

Loading next page...
 
/lp/springer-journals/preparation-of-lifepo4-c-via-high-temperature-ball-milling-route-and-pWSmVYesWJ

References (46)

Publisher
Springer Journals
Copyright
Copyright © 2019 by Springer-Verlag GmbH Germany, part of Springer Nature
Subject
Chemistry; Electrochemistry; Renewable and Green Energy; Optical and Electronic Materials; Condensed Matter Physics; Energy Storage
ISSN
0947-7047
eISSN
1862-0760
DOI
10.1007/s11581-019-03031-3
Publisher site
See Article on Publisher Site

Abstract

LiFePO4/C cathode material was prepared via high-temperature ball-milling route with ultrasonic dispersion as mixing process using eutectic molten salt (0.76 LiOH·H2O-0.24 Li2CO3) as lithium source. Box-Behnken design was used to study the combined effects of ultrasonic time, ball-milling temperature, and ball-milling time on the discharge capacity to obtain the optimum predicted conditions. The optimum conditions were as follows: ultrasonic time was 63 min, ball-milling temperature was 638 °C, and ball-milling time was 7 h. LiFePO4/C prepared from the optimized experimental conditions exhibited a well electrochemical performance; its discharge capacity was 161.3 mAh g−1 at a 0.1 C-rate which was in consistence with the predicted discharge capacity of 160.2 mAh g−1. Moreover, its capacity retention rate achieved 93.6% at a 10 C-rate over 100 cycles.

Journal

IonicsSpringer Journals

Published: Jun 14, 2019

There are no references for this article.