Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

On smelting cassiterite in geological and archaeological samples: preparation and implications for provenance studies on metal artefacts with tin isotopes

On smelting cassiterite in geological and archaeological samples: preparation and implications... Tin isotope ratios may be a useful tool for tracing back the tin in archaeological metal artefacts (tin metal, bronze) to the geological source and could provide information on ancient smelting processes. This study presents the results of laboratory experiments, which reduced (smelted) synthetic stannic oxide, natural cassiterite and corroded archaeological tin and bronze objects. The overall aim of the study is to find a reliable method for the decomposition of tin ores and corrosion products in order to determine their tin isotopic composition, and to explore possible effects on the tin isotope ratios during pyrometallurgy. We focused on five methods of reduction at high temperatures (900–1100 °C): reduction with CO (plain smelting), reduction with KCN/CO (cyanide reduction), reduction with Na2CO3/CO, reduction with Cu/CO (‘cementation technique’) and reduction with CuO/CO (‘co-smelting’). The smelting products are analysed by means of optical and scanning electron microscopy as well as X-ray diffraction, while their isotope composition is determined with a high-resolution multi-collector mass spectrometer with inductively coupled plasma ionisation. The results show that all five methods decompose synthetic stannic oxide, cassiterite and corrosion products. Ultimately, reduction with KCN is the best solution for analysing tin ores and tin corrosion because the chemical processing is straightforward and it provides the most reproducible results. Reduction with Na2CO3 and copper is an alternative, especially for bronze corrosion, but it requires laborious chemical purification of the sample solutions. In contrast, evaporation of tin and incomplete alloying during plain smelting and co-smelting can cause considerable fractionation among smelting products (Δ124Sn = 0.10 ‰ (0.03 ‰ u−1)). A less precise and even inaccurate determination of the tin isotopic compositions of the tin ores would be the consequence. However, the results of this study help to evaluate the possible influence of the pyrometallurgical processes on the tin isotope composition of tin and bronze artefacts. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Archaeological and Anthropological Sciences Springer Journals

On smelting cassiterite in geological and archaeological samples: preparation and implications for provenance studies on metal artefacts with tin isotopes

Download PDF
27 pages

Loading next page...
 
/lp/springer-journals/on-smelting-cassiterite-in-geological-and-archaeological-samples-EJZpR5paVS

References (71)

Publisher
Springer Journals
Copyright
Copyright © 2017 by Springer-Verlag GmbH Germany
Subject
Earth Sciences; Earth Sciences, general; Archaeology; Chemistry/Food Science, general; Geography, general; Life Sciences, general; Anthropology
ISSN
1866-9557
eISSN
1866-9565
DOI
10.1007/s12520-017-0544-z
Publisher site
See Article on Publisher Site

Abstract

Tin isotope ratios may be a useful tool for tracing back the tin in archaeological metal artefacts (tin metal, bronze) to the geological source and could provide information on ancient smelting processes. This study presents the results of laboratory experiments, which reduced (smelted) synthetic stannic oxide, natural cassiterite and corroded archaeological tin and bronze objects. The overall aim of the study is to find a reliable method for the decomposition of tin ores and corrosion products in order to determine their tin isotopic composition, and to explore possible effects on the tin isotope ratios during pyrometallurgy. We focused on five methods of reduction at high temperatures (900–1100 °C): reduction with CO (plain smelting), reduction with KCN/CO (cyanide reduction), reduction with Na2CO3/CO, reduction with Cu/CO (‘cementation technique’) and reduction with CuO/CO (‘co-smelting’). The smelting products are analysed by means of optical and scanning electron microscopy as well as X-ray diffraction, while their isotope composition is determined with a high-resolution multi-collector mass spectrometer with inductively coupled plasma ionisation. The results show that all five methods decompose synthetic stannic oxide, cassiterite and corrosion products. Ultimately, reduction with KCN is the best solution for analysing tin ores and tin corrosion because the chemical processing is straightforward and it provides the most reproducible results. Reduction with Na2CO3 and copper is an alternative, especially for bronze corrosion, but it requires laborious chemical purification of the sample solutions. In contrast, evaporation of tin and incomplete alloying during plain smelting and co-smelting can cause considerable fractionation among smelting products (Δ124Sn = 0.10 ‰ (0.03 ‰ u−1)). A less precise and even inaccurate determination of the tin isotopic compositions of the tin ores would be the consequence. However, the results of this study help to evaluate the possible influence of the pyrometallurgical processes on the tin isotope composition of tin and bronze artefacts.

Journal

Archaeological and Anthropological Sciences – Springer Journals

Published: Oct 3, 2017

There are no references for this article.