Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Microstructure and Mechanical Property of (TiNbTaZrHf)C Synthesized by In-situ Reaction

Microstructure and Mechanical Property of (TiNbTaZrHf)C Synthesized by In-situ Reaction The (TiNbTaZrHf)C high entropy carbide(HEC) was successfully synthesized by complete commercial transition metal powders, obtained fine sintered bulks without additives by in-situ reaction element synthesis method. (TiNbTaZrHf)C bulk shows a face centered cubic rock salt structure with homogeneous single-phase FCC structure in composition and structure. The optimum sintering temperature is about 1 900 °C at which the best mechanical properties are obtained. The mechanical properties of (TiNbTaZrHf)C ceramic block are better than those of binary transition metal carbides, and it has obvious high entropy effect. Adding a small amount of Al as sintering additive, the mechanical properties of (TiNbTaZrHf)C ceramics continue to improve, the bending strength of the samples at each temperature is increased by at least 38%, and the highest is 486 MPa. The elastic modulus and hardness of the sample at 1 900 C are also slightly increased by 4% and 14%, respectively. The above conclusions illustrate that the properties of high entropy ceramics are greatly improved by in-situ reaction sintering. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Journal of Wuhan University of Technology-Mater. Sci. Ed. Springer Journals

Microstructure and Mechanical Property of (TiNbTaZrHf)C Synthesized by In-situ Reaction

Download PDF
7 pages

Loading next page...
 
/lp/springer-journals/microstructure-and-mechanical-property-of-tinbtazrhf-c-synthesized-by-Cx3Ts5am6u

References (21)

Publisher
Springer Journals
Copyright
Copyright © Wuhan University of Technology and Springer-Verlag GmbH Germany, Part of Springer Nature 2022
ISSN
1000-2413
eISSN
1993-0437
DOI
10.1007/s11595-022-2515-1
Publisher site
See Article on Publisher Site

Abstract

The (TiNbTaZrHf)C high entropy carbide(HEC) was successfully synthesized by complete commercial transition metal powders, obtained fine sintered bulks without additives by in-situ reaction element synthesis method. (TiNbTaZrHf)C bulk shows a face centered cubic rock salt structure with homogeneous single-phase FCC structure in composition and structure. The optimum sintering temperature is about 1 900 °C at which the best mechanical properties are obtained. The mechanical properties of (TiNbTaZrHf)C ceramic block are better than those of binary transition metal carbides, and it has obvious high entropy effect. Adding a small amount of Al as sintering additive, the mechanical properties of (TiNbTaZrHf)C ceramics continue to improve, the bending strength of the samples at each temperature is increased by at least 38%, and the highest is 486 MPa. The elastic modulus and hardness of the sample at 1 900 C are also slightly increased by 4% and 14%, respectively. The above conclusions illustrate that the properties of high entropy ceramics are greatly improved by in-situ reaction sintering.

Journal

Journal of Wuhan University of Technology-Mater. Sci. Ed. – Springer Journals

Published: Apr 1, 2022

Keywords: high entropy carbide; in-situ reaction; microstructure; mechanical property; sintering additive

There are no references for this article.