Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/mechanochemical-assisted-synthesis-and-characterization-of-al2o3-b4c-LADhBNN6Vo
References (26)
-
P. Baláž (2008)
Mechanochemistry in Nanoscience and Minerals Engineering -
C. Suryanarayana, N. Al-Aqeeli (2013)
Mechanically alloyed nanocompositesProgress in Materials Science, 58
-
O. Torabi, R. Ebrahimi-Kahrizsangi (2012)
Synthesis of B4C, Al2O3, and AlB12 reinforced Al matrix nano composites via mechanochemical methodJournal of Composite Materials, 46
-
P. Baláž (2008)
High-Energy Milling -
K. Laishram, R. Mann, Neelam Malhan (2012)
A novel microwave combustion approach for single step synthesis of α-Al2O3 nanopowdersCeramics International, 38
-
E. Shakeri, M. Sakaki, M. Jalaly, Bafghi M.Sh. (2015)
MICROWAVE SYNTHESIS OF B4C–Al2O3 COMPOSITE IN A MECHANICALLY ACTIVATED Al/B2O3/C POWDER MIXTUREIranian Journal of Materials Science and Engineering, 12
-
A. Kipcak, P. Gurses, E. Derun, N. Tugrul, S. Pişkin (2013)
Characterization of boron carbide particles and its shielding behavior against neutron radiationEnergy Conversion and Management, 72
-
(2013)
Effect of the aluminum content on the mechanochemical behavior in ternary system Al–B2O3– C -
Xiaoguang Li, D. Jiang, Jingxian Zhang, Q. Lin, Z. Chen, Zhengren Huang (2013)
The dispersion of boron carbide powder in aqueous mediaJournal of The European Ceramic Society, 33
-
R. Ebrahimi-Kahrizsangi, O. Torabi (2012)
Combination of mechanochemical activation and self-propagating behavior for the synthesis of nanocomposite Al2O3/B4C powderJournal of Alloys and Compounds, 514
-
M. Baraton (2002)
Synthesis, Functionalization and Surface Treatment of Nanoparticles -
嘉夫 早稲田, 松原 英一郎, 篠田 弘造 (2011)
X-ray diffraction crystallography : introduction, examples and solved problems -
Synthesis and characterization of Al 2 O 3 -B 4 C composite at room temperature by mechanochemical method from aluminumboron oxide-carbon mixtures at different ratios -
H. Huang, Xm Wang, J. Yang, K. Xu, Shihan Dai (2011)
Effect of carbide on Al2O3/B4C burnable poison sintered in ArNuclear Engineering and Design, 241
-
A. Suri, C. Subramanian, J. Sonber, T. Murthy (2010)
Synthesis and consolidation of boron carbide: a reviewInternational Materials Reviews, 55
-
(2014)
Synthesis of Nano particle ceramic phase Al2O3/B4C by mechanochemical method and microstructural characterization -
Hakan Gokmese, B. Bostan, M. Baris (2017)
Fabrication and characterization of nanoceramic particle Al2O3/B4C composite by mechanochemical approachInorganic and Nano-Metal Chemistry, 47
-
C. Suryanarayana, In-Seop An (2004)
Mechanical alloying and millingJournal of Korean Powder Metallurgy Institute, 13
-
Xuan Lin, P. Ownby (2000)
Pressureless sintering of B4C whisker reinforced Al2O3 matrix compositesJournal of Materials Science, 35
-
E. Sharifi, F. Karimzadeh, M. Enayati (2009)
A study on mechanochemical behavior of B2O3–Al system to produce alumina-based nanocompositeJournal of Alloys and Compounds, 482
-
Y. Waseda, E. Matsubara, K. Shinoda (2011)
X-Ray Diffraction Crystallography -
Xu-hua Zou, Shixue Qi, Jinguang Xu, Zhang Suo, L. An, Feng Li (2010)
Study on Au/Al2O3 catalysts for low-temperature CO oxidation in situ FT-IRJournal of Natural Gas Chemistry, 19
-
Sumana Das, S. Datta, A. Mukhopadhyay, K. Pal, D. Basu (2010)
Al–Al2O3 core–shell composite by microwave induced oxidation of aluminium powderMaterials Chemistry and Physics, 122
-
S. Sivasankaran, K. Sivaprasad, R. Narayanasamy, P. Satyanarayana (2011)
X-ray peak broadening analysis of AA 6061100 − x − x wt.% Al2O3 nanocomposite prepared by mechanical alloyingMaterials Characterization, 62
-
Publisher's note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations -
F. Deng, H. Xie, L. Wang (2006)
Synthesis of submicron B4C by mechanochemical methodMaterials Letters, 60
- Publisher
- Springer Journals
- Copyright
- Copyright © Australian Ceramic Society 2020
- ISSN
- 2510-1560
- eISSN
- 2510-1579
- DOI
- 10.1007/s41779-020-00467-z
- Publisher site
- See Article on Publisher Site
Abstract
Synthesis of the Al2O3-B4C ceramic was carried out in this study via mechanochemical method. A highest value of 64.72 m2/g was obtained at the end of milling for 6 h during the BET analyses carried out for determining the surface area of synthesis powders. The bond structures between Al–O and B–C were determined in FT-IR analysis in accordance with the data acquired from relevant literature. Peaks for only the Al2O3 and B4C phases were determined by XRD analysis before and after the leaching process especially after an 8 h milling. The Al2O3-B4C composite powder obtained after milling under optimum milling conditions for 8 h was shaped into pellet with and without the addition of 2% by weight binder (paraffin) in a uniaxial press and cold isostatic press. The Al2O3-B4C composite obtained has a relative density value of 86% after sintering in the Ar atmospheric tube furnace at 1550 °C.
Journal
Journal of the Australian Ceramic Society – Springer Journals
Published: May 14, 2020