Access the full text.
Sign up today, get DeepDyve free for 14 days.
C. Koufopanos G. Maschio (1992)
Pyrolysis, a promising route for biomass utilizationBioresource Technology, 42
J. C. Arthur (1977)
Cellulose Chemistry and Technology
R. M. Carangelo R. Bassilakis (2001)
TG-FTIR analysis of biomass pyrolysisFuel, 80
G. Varhegyi M. J. Antal (1995)
Cellulose pyrolysis kinetics: The current state of knowledgeIndustrial & Engineering Chemistry Research, 34
M. A. Nolson A. Broido (1975)
Char yield on pyrolysis of celluloseCombustion and Flame, 24
G. Maschio C. A. Koufopanos (1989)
Kinetic modeling of the pyrolysis of biomass and biomass componentsCanadian Journal of Chemical Engineering, 67
M. Hajaligol T. Fisher (2002)
Pyrolysis behavior and kinetics of biomass derived materialsJournal of Analytical and Applied Pyrolysis, 62
S. R. Wang Y. F. Liao (2003)
Research on cellulose rapid pyrolysisJournal of Zhejiang University: Engineering Science, 37
S. C. Moldoveanu (1998)
Analytical Pyrolysis of Natural Organic Polymers
Y. Sakai A. W. Bradbury (1979)
A kinetic model for pyrolysis of celluloseJournal of Applied Polymer Science, 23
G. N. Richards W. P. Pan (1989)
Influence of metal ions on volatile products of pyrolysis of woodJournal of Analytical and Applied Pyrolysis, 16
A. Pirone W. Jong (2003)
Pyrolysis of Miscanthus Giganteus and wood pellets: TG-FTIR analysis and reaction kineticsFuel, 82
J. Lyons-Hart S. Li (2001)
Real-time evolved gas analysis by FTIR method: An experimental study of cellulose pyrolysisFuel, 80
Y. Z. Lai F. Shafizadeh (1978)
Thermal degradation of 6-chlorocellulose and cellulose-zinc chloride mixtureJournal of Applied Polymer Science, 22
Abstract Based on the investigation of the polysaccharide structure of cellulose by using Fourier transform spectrum analysis, the pyrolysis behaviour of cellulose was studied at a heating rate of 20 K/min by thermogravimetric (TG) analysis coupled with Fourier transform infrared (FTIR) spectroscopy. Experimental results show that the decomposition of cellulose mainly occurs at the temperature range of 550–670 K. The weight loss becomes quite slow when the temperature increases further up to 680 K and the amount of residue reaches a mass percent of 14.7%. The FTIR analysis shows that free water is released first during cellulose pyrolysis, followed by depolymerization and dehydration. Glucosidic bond and carbon-carbon bond break into a series of hydrocarbons, alcohols, aldehydes, acids, etc. Subsequently these large-molecule compounds decompose further into gases, such as methane and carbon monoxide.
"Frontiers in Energy" – Springer Journals
Published: Oct 1, 2007
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.