Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/mechanical-properties-and-microstructure-of-micro-and-nano-additives-ljHNMMwXYI
References (48)
-
(1963)
Method of Test for Aggregate for Concrete -
G.M. Islam, M.H. Rahman, Nayem Kazi (2017)
Waste glass powder as partial replacement of cement for sustainable concrete practiceInternational journal of sustainable built environment, 6
-
M. Schneider, M. Romer, M. Tschudin, H. Bolio (2011)
Sustainable cement production—present and futureCement and Concrete Research, 41
-
Murat Pala, Erdogan Özbay, A. Öztas, M. Yuce (2007)
Appraisal of long-term effects of fly ash and silica fume on compressive strength of concrete by neural networksConstruction and Building Materials, 21
-
M. Collepardi, S. Collepardi, U. Skarp, R. Troli (2004)
Optimization of Silica Fume, Fly Ash and Amorphous Nano-Silica in Superplasticized High-Performance ConcreteSP-221: Eighth CANMET/ACI International Conference on Fly Ash, Silica Fume, Slag, and Natural Pozzolans in Concrete
-
R. Berger, J. McGregor (1972)
Influence of admixtures on the morphology of calcium hydroxide formed during tricalcium silicate hydrationCement and Concrete Research, 2
-
M. Khanzadi, M. Tadayon, Hamed. Sepehri, M. Sepehri (2010)
Influence of Nano-Silica Particles on Mechanical Properties and Permeability of Concrete -
(2015)
The effect of nanosilica in compensating the strength loss caused by using high volume fly ash in high strength mortars -
Pradip Nath, Prabir Kumar Sarker, Vijaya B. Rangan (2015)
Early Age Properties of Low-calcium Fly Ash Geopolymer Concrete Suitable for Ambient CuringProcedia Engineering, 125
-
Sayed El-Baky, S. Yehia, I. Khalil (2013)
INFLUENCE OF NANO-SILICA ADDITION ON PROPERTIES OF FRESH AND HARDENED CEMENT MORTAR -
(2006)
Concrete Structures Standard, Part 1: The Design of Concrete Structures -
(2000)
Bureau of Indian Standards. IS 456: 2000-Plain and Reinforced Concrete-Code and Practice. Fourth -
V. Vandana, M. S. L. Karuna, P. Vijayalakshmi, R. B. N. Prasad (2001)
A simple method to enrich phospholipid content in commercial soybean lecithinJournal of the American Oil Chemists' Society, 78
-
E. Gartner (2004)
Industrially interesting approaches to “low-CO2” cements ☆Cement and Concrete Research, 34
-
(2005)
Methods of physical tests for hydraulic cement -
Richard S. Peterson, Roma A. Andhare, Kathleen T. Rousche, Warren Knudson, Weihua Wang, Jami B. Grossfield, Raymond O. Thomas, Robert E. Hollingsworth, Cheryl B. Knudson (2004)
CD44 modulates Smad1 activation in the BMP-7 signaling pathwayThe Journal of Cell Biology, 166
-
E. Benhelal, G. Zahedi, E. Shamsaei, A. Bahadori (2013)
Global strategies and potentials to curb CO2 emissions in cement industryJournal of Cleaner Production, 51
-
L. Senff, D. Hotza, W. Repette, V. Ferreira, J. Labrincha (2010)
Effect of nanosilica and microsilica on microstructure and hardened properties of cement pastes and mortarsAdvances in Applied Ceramics, 109
-
Sheetal Agarwal (2006)
Pozzolanic activity of various siliceous materialsCement and Concrete Research, 36
-
Thushara, Priyadarshana, Ranjith, Dissanayake, Priyan, Mendis (2015)
Effects of Nano Silica, Micro Silica, Fly Ash and Bottom Ash on Compressive Strength of Concrete, 9
-
(2019)
318-19 Building Code Requirements for Structural Concrete and Commentary -
Huang Yi, Guoping Xu, Huigao Cheng, Junshi Wang, Yinfeng Wan, Hui Chen (2012)
An Overview of Utilization of Steel SlagProcedia Environmental Sciences, 16
-
Jon Bi, I. Pane, B. Hariandja, I. Imran (2012)
The Use of Nanosilica for Improving of Concrete Compressive Strength and DurabilityApplied Mechanics and Materials, 204-208
-
(2020)
The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze0 10 20 30 40 50 60 70 W ei gh t ( % ) O Al Si Ca C Fig -
Hasan Biricik, N. Sarıer (2014)
Comparative study of the characteristics of nano silica - , silica fume - and fly ash - incorporated cement mortarsMaterials Research-ibero-american Journal of Materials, 17
-
(1998)
British Standards Institution BSI. Structural use of concrete-Part 1: Code of practice for design and construction -
Gengying Li (2004)
Properties of high-volume fly ash concrete incorporating nano-SiO2Cement and Concrete Research, 34
-
C. Chen, G. Habert, Y. Bouzidi, A. Jullien (2010)
Environmental impact of cement production: detail of the different processes and cement plant variability evaluationJournal of Cleaner Production, 18
-
Francis Oluokun, E. Burdette, J. Deatherage (1991)
SPLITTING TENSILE STRENGTH AND COMPRESSIVE STRENGTH RELATIONSHIPS AT EARLY AGESMaterials, 88
-
M. Mazloom, A. Ramezanianpour, J. Brooks (2004)
Effect of silica fume on mechanical properties of high-strength concreteCement & Concrete Composites, 26
-
C. Shi, K. Zheng (2007)
A review on the use of waste glasses in the production of cement and concreteResources Conservation and Recycling, 52
-
(1999)
IS:5816. Splitting Tensile Strength of Concrete -
Min-hong Zhang, J. Islam, S. Peethamparan (2012)
Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slagCement & Concrete Composites, 34
-
J. Brito, J. Ferreira, J. Pacheco, D. Soares, M. Guerreiro (2016)
Structural, material, mechanical and durability properties and behaviour of recycled aggregates concreteJournal of building engineering, 6
-
N. Carino, H. Lew (1982)
RE-EXAMINATION OF THE RELATION BETWEEN SPLITTING TENSILE AND COMPRESSIVE STRENGTH OF NORMAL WEIGHT CONCRETE, 79
-
(2010)
Influence of nano-SiO2 and microsilica on concrete performance -
Weerachart Tangchirapat, Tirasit Saeting, C. Jaturapitakkul, K. Kiattikomol, Anek Siripanichgorn (2007)
Use of waste ash from palm oil industry in concrete.Waste management, 27 1
-
N. Arıoğlu, Z. Girgin, E. Arıoğlu (2006)
Evaluation of Ratio Between Splitting Tensile Strength and Compressive Strength for Concretes up to 120 MPa and its Application in Strength CriterionAci Materials Journal, 103
-
(2012)
for Silica Fume Used in Cementitious Mixtures -
H Yazici (2008)
The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze-thaw resistance of self-compacting concreteConstr. Build. Mater.
-
P. Aggarwal, Rahul Singh, Y. Aggarwal (2015)
Use of nano-silica in cement based materials—A reviewCogent Engineering, 2
-
(2013)
Comparative studies on high strength concrete mixes using micro silica and nanosilica -
(2009)
Concrete Mix Proportioning-Guidelines -
R. Poston, B. Rabbat, S. Alcocer, N. Anderson, F. Barth, K. Bondy, Dean Browning, N. Cleland, W. Corley, C. Dolan, A. Fiorato, C. French, R. Frosch, Luis García, S. Ghosh, H. Gleich, James Harris, T. Holland, J. Jirsa, D. Kelly, G. Klein, R. Klemencic, Cary Kopczynski, C. Lobo, J. Moehle, G. Parra-Montesinos, J. Ramirez, D. Rogowsky, D. Sanders, G. Santana, T. Schaeffer, Andrew Taylor, Eric Tolles, J. Wight, S. Wood, L. Wyllie, F. Bartlett, A. Bommer, J. Browning, R. Cook, D. Darwin, L. Feldman, K. Folliard, R. Hooton, K. Hover, S. Kosmatka, M. Kreger, J. Krohn, D. Kuchma, A. Lepage, L. Lutz, J. Maffei, Fred Meyer, D. Mitchell, T. Mize, S. Nakaki, T. Neff, Viral Patel, C. Paulson, J. Pincheira, Mario Rodriguez, B. Russell, M. Saiidi, A. Schokker, J. Stanton, R. Stark, J. Wallace, M. Brewer, L. Fargier-Gabaldón, A. Giovambattista, Héctor Hernández, A. Herrera, P. Placencia, Oscar Ramirez, F. Stucchi, F. Yáñez, J. Breen, N. Hawkins, J. Macgregor, R. Mast, C. Salmon (2011)
BUILDING CODE REQUIREMENTS FOR STRUCTURAL CONCRETE (ACI 318-11) AND COMMENTARY -
(2016)
National Ready Mixed Concrete Association N. CIP 36-Structural Lightweight Concrete -
Publisher's Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations -
Abdul Wahab, B. Kumar, M. Bhaskar, S. Kumar, B. Swami (2013)
Concrete Composites With Nano Silica, Condensed Silica Fume And Fly Ash - Study of Strength Properties -
H. Hung (1997)
Properties of high volume fly ash concrete
- Publisher
- Springer Journals
- Copyright
- Copyright © The Institution of Engineers (India) 2019
- Subject
- Engineering; Civil Engineering
- ISSN
- 2250-2149
- eISSN
- 2250-2157
- DOI
- 10.1007/s40030-019-00411-w
- Publisher site
- See Article on Publisher Site
Abstract
The present study focuses on the effect of cement replacement with micro-silica fume (SF), nano-silica fume (NS) and fly ash (F) individually and in a combination of two additives, on the mechanical properties (split, flexural tensile and compressive strengths) of 22 modified concrete mixes. The microstructure analysis and chemical microanalysis of the mixes have also been undertaken. The addition of micro- and nano-silica fume alone enhances the strength of concrete. However, the addition of fly ash causes a reduction in the strength properties for all replacement percentages. The combination of micro- and nano-silica fume improves the mechanical properties of concrete for all percentages of replacement. The microstructure and chemical analysis of modified concrete show enhancement in the morphological properties of concrete owing to pore filling with dense and compact structure and C–H crystals reduction and denser structure in pastes due to the incorporation of micro- and nano-silica fume. The present experimental research shows that the concrete modified with industrial by-products establishes extra functionalities, thus well addressing the environmental sustainability issues.
Journal
Journal of The Institution of Engineers (India): Series A – Springer Journals
Published: Mar 21, 2020