Access the full text.
Sign up today, get DeepDyve free for 14 days.
Yong-Hong Zhao, K. Wee, R. Bai (2010)
Highly hydrophilic and low-protein-fouling polypropylene membrane prepared by surface modification with sulfobetaine-based zwitterionic polymer through a combined surface polymerization methodJournal of Membrane Science, 362
Wilhelm Pfleging, M. Torge, M. Bruns, V. Trouillet, A. Welle, Sandra Wilson (2009)
Laser- and UV-assisted modification of polystyrene surfaces for control of protein adsorption and cell adhesionApplied Surface Science, 255
Wang Jian, L. Hong, Xu Jinping, Jiang Zhou, Chen Naisheng, Huang Jinling (2008)
The constitutes and isomer distribution of di-(potassium sulfonate)-di-phthalimidomethyl phthalocyanine zincChinese Science Bulletin, 53
J. Whitacre, R. Murphy, A. Marrie, S. Yalisove (2009)
Enhanced catalyst utilization in PEM fuel cells via ultrafast laser modification of the polymer exchange membrane surfaceElectrochemistry Communications, 11
M. Dadsetan, H. Mirzadeh, N. Sharifi (1999)
Effect of CO2 laser radiation on the surface properties of polyethylene terephthalateRadiation Physics and Chemistry, 56
R. Barhate, S. Ramakrishna (2007)
Nanofibrous filtering media: Filtration problems and solutions from tiny materialsJournal of Membrane Science, 296
K. Tiaw, S. Goh, M. Hong, Zengbo Wang, B. Lan, S. Teoh (2005)
Laser surface modification of poly(ε-caprolactone) (PCL) membrane for tissue engineering applicationsBiomaterials, 26
J. Brannon, J. Lankard (1986)
Pulsed CO2 laser etching of polyimideApplied Physics Letters, 48
J. Fang, Haitao Niu, Tong Lin, Xungai Wang (2008)
Applications of electrospun nanofibersChinese Science Bulletin, 53
M. Aminuzzaman, M. Mitsuishi, T. Miyashita (2010)
Surface modification of a flexible polyimide film using a reactive fluorinated polymer nanosheetThin Solid Films, 519
P. Rytlewski, M. Żenkiewicz (2009)
Laser-induced surface modification of polystyreneApplied Surface Science, 256
Guiping Ma, Dongzhi Yang, J. Nie (2009)
Preparation of porous ultrafine polyacrylonitrile (PAN) fibers by electrospinningPolymers for Advanced Technologies, 20
M. Strlič, J. Kolar, V. Šelih, M. Marinček (2003)
Surface modification during Nd : YAG (1064 nm) pulsed laser cleaning of organic fibrous materialsApplied Surface Science, 207
W. Wong, K. Chan, K. Yeung, Y. Tsang, Kai Lau (2000)
Surface structuring of poly(ethylene terephthalate) fibres with a UV excimer laser and low temperature plasmaJournal of Materials Processing Technology, 103
J. Mccann, M. Márquez, Younan Xia (2006)
Highly porous fibers by electrospinning into a cryogenic liquid.Journal of the American Chemical Society, 128 5
P. Laurens, M. Bouali, F. Méducin, B. Sadras (2000)
Characterization of modifications of polymer surfaces after excimer laser treatments below the ablation thresholdApplied Surface Science, 154
S. Nataraj, Bo-Hye Kim, M. Cruz, J. Ferraris, T. Aminabhavi, K. Yang (2009)
Free standing thin webs of porous carbon nanofibers of polyacrylonitrile containing iron-oxide by electrospinningMaterials Letters, 63
Hms Iqbal, S. Bhowmik, R. Benedictus (2010)
Surface modification of high performance polymers by atmospheric pressure plasma and failure mechanism of adhesive bonded jointsInternational Journal of Adhesion and Adhesives, 30
J. Martan, J. Kuneš, N. Semmar (2007)
Experimental mathematical model of nanosecond laser interaction with materialApplied Surface Science, 253
Abstract In this study a newly laser treatment method for surface modification of nanofibers is introduced. The new method is based on different infrared absorption of materials. Surface modification of Clay-PAN composite nanofibers was performed using selective laser etching approach with CO2 pulsed laser in order to increase surface area of nanofibers. The surface structure of resulted nanofibers is characterized using field emission scanning electron microscope and the results show characteristic modification of the surface topography of laser treated nanofibers. The modified surface structure of nanofibers was studied and analyzed for different laser pulse numbers and laser fluence. The results show that nanofiber surface modification strongly depends on the number of CO2 laser pulses and frequency of modified sites on the surface of nanofibers increasing with increasing the pulse fluence. This new technique is highly selective and can also compete with conventional techniques for nanofibers surface modification.
Fibers and Polymers – Springer Journals
Published: Sep 1, 2011
Keywords: Polymer Sciences
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.