Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/heat-and-mass-transfer-at-gas-phase-ignition-of-grinded-coal-layer-by-BsxnH6Y9EL
References (39)
-
(2014)
Heat engineering characteristics of coals of the Shive-Ovoos field of Mongolia as power-plant fuel, Izvestiya Tomskogo politekhnicheskogo universiteta -
(2013)
Strizhak, Investigation of integral characteristics of the ignition of polymer material by several particles heated up to high temperatures -
(2010)
Ignition of Condensed Substances at Local Heating, Publ -
J. Dymond (1999)
Handbook of Physical Properties of Liquids and Gases Pure Substances and Mixtures. Third Augmented and Revised Edition. By N. B. Vargaftik, Y. K. Vinogradov, and V. S. Yargin. Begell House, Inc., New York. 1996. 1359 pp. $165.00. ISBN 1-56700-063-0.Journal of Chemical & Engineering Data, 44
-
Grimvall, A. Sherman (1977)
Thermophysical properties of materialsPhysics in Technology, 8
-
A. Shebeko, Y. Shebeko, A. Zuban, N. Golov (2015)
An investigation of an ignition of flammable gaseous mixtures with mechanical sparksFire Safety Journal, 78
-
S.S. Kutateladze (1963)
Fundamentals of Heat Transfer -
I. Donskoi, A. Keiko, A. Kozlov, D. Svishchev, V. Shamanskii (2013)
Calculation of the fixed bed coal gasification regimes by the use of thermodynamic model with macrokinetic constraintsThermal Engineering, 60
-
G. Kuznetsov, P. Strizhak (2010)
On the possibility of using a one-dimensional model for numerical analysis of the ignition of a liquid condensed material by a single heated particleCombustion, Explosion, and Shock Waves, 46
-
(2012)
An experimental study of coal dust ignition in wedge shaped hot plate configurations / / Combustion and Flame -
(2004)
Shishmarev, Kinetics of thermochemical conversions of the coals of the Kansk-Achinsk basin, Khimiya tverdogo tela -
D. Glushkov, G. Kuznetsov, P. Strizhak (2014)
Stability of composite solid propellant ignition by a local source of limited energy capacityCombustion, Explosion, and Shock Waves, 50
-
B. Kuznetsov, M. Shchipko, N. Chesnokov, T. Miloshenko, L. Safonova, E. Veprikova, A. Zhizhaev, N. Pavlenko (2005)
Obtaining the Porous Carbon Materials through High-Speed Heating and Preliminary Chemical Modification of Anthracites -
(2016)
Modeling of coil cooling using 2D and 3D Computational Fluid Dynamics (CFD) // Int -
G. Kuznetsov, P. Strizhak (2009)
On the scale of “simultaneous” influence of several “hot” particles on the conditions of heat and mass transfer at ignition of liquid condensed substanceJournal of Engineering Thermophysics, 18
-
A. Zakharevich, A. Bogomolov (2015)
Effect of heat transfer conditions on the ignition characteristics of dispersed solid fuelRussian Journal of Physical Chemistry B, 9
-
(2008)
Vikhrev, Development of thermal power engineering of China, Energetik -
(2015)
Processing of coaly mudstones for obtaining the ceramic stuff and technological fuel -
V.B. Gleybman (1980)
Thermophysics of Solid Fuel -
(1963)
Fundamentals of Heat Transfer, Acad -
(1983)
Handbook of Physical Properties of Liquids and Gases -
A. Janes, D. Carson, A. Accorsi, J. Chaineaux, Benoît Tribouilloy, Daniel Moranviller, D. A.JANES–, A. CARSON–, J. ACCORSI–, CHAINEAUX-B, D. TRIBOUILLOY–, Morainvillers (2008)
Correlation between self-ignition of a dust layer on a hot surface and in baskets in an oven.Journal of hazardous materials, 159 2-3
-
Supan Wang, Haixiang Chen, Naian Liu (2015)
Ignition of expandable polystyrene foam by a hot particle: an experimental and numerical study.Journal of hazardous materials, 283
-
(2003)
Solid Fuel Processing: Textbook for Higher Schools -
D. Glushkov, P. Strizhak (2012)
Heat and mass transfer at ignition of solid condensed substance with relatively low calorific power by a local energy sourceJournal of Engineering Thermophysics, 21
-
D. Frank-Kamenet︠s︡kiĭ (1969)
Diffusion and heat transfer in chemical kinetics -
R. Burkina, E. Mikova (2009)
High-temperature ignition of a reactive material by a hot inert particle with a finite heat reserveCombustion, Explosion, and Shock Waves, 45
-
Dependence of thermal properties of coals on the bulk weight , carbonization velocity , and the time of isothermal storage -
A. Burdukov, V. Popov, G. Chernova, M. Chernetskiy, A. Dekterev, N. Chernetskaya, V. Markova, V. Churashev, T. Yusupov (2013)
Development of the technology of using mechanically activated microgrinded coals for firing and lighting of coal boilers of acting thermal power stationsThermal Engineering, 60
-
Yu.V. Vikhrev A.N. Tugov (2008)
Development of thermal power engineering of ChinaEnergetik, 2
-
Prediction of the Development of Power Engineering of the World and Russia Until Year (2040)
Prediction of the Development of Power Engineering of the World and Russia Until Year 2040. INEI RAN, Moscow, 2013. -
D.G. Didichin E.A. Boiko (2004)
Kinetics of thermochemical conversions of the coals of the Kansk-Achinsk basinKhimiya tverdogo tela, 3
-
Prediction of the Development of Power Engineering of the World and Russia Until Year 2040, INEI RAN, Moscow, 2013. Fig. 5. Grinded coal ignition delay time vs -
A.Yu. Dolgikh A.S. Zavorin (2014)
Heat engineering characteristics of coals of the Shive-Ovoos field of Mongolia as power-plant fuelIzvestiya Tomskogo politekhnicheskogo universiteta, 324
-
K. Osintsev, V. Osintsev, A. Dzhundubaev, S. Kim, G. Al’musin, T. Akbaev, V. Bogatkin (2013)
The production of activated carbon using the equipment of thermal power plants and heating plantsThermal Engineering, 60
-
V. Raghavan K.A. Joshi (2012)
An experimental study of coal dust ignition in wedge shaped hot plate configurationsCombustion and Flame, 159
-
(1980)
Gleybman, Thermophysics of Solid Fuel -
y p = 3 mm, γ = 0.6, 2 y p = 3 mm, γ = 1, 3 y p = 6 mm -
A. Bogomolov, M. Alekseev, A. Sorokin, N. Pribaturin, E. Kagakin, S. Shevyrev (2013)
Studying the conversion of coals and sludges in superheated steam flowThermal Engineering, 60
- Publisher
- Springer Journals
- Copyright
- 2017 Pleiades Publishing, Ltd.
- ISSN
- 0869-8643
- eISSN
- 1531-8699
- DOI
- 10.1134/S0869864317040114
- Publisher site
- See Article on Publisher Site
Abstract
Abstract Characteristics of gas-phase ignition of grinded brown coal (brand 2B, Shive-Ovoos deposit in Mongolia) layer by single and several metal particles heated to a high temperature (above 1000 K) have been investigated numerically. The developed mathematical model of the process takes into account the heating and thermal decomposition of coal at the expense of the heat supplied from local heat sources, release of volatiles, formation and heating of gas mixture and its ignition. The conditions of the joint effect of several hot particles on the main characteristic of the process–ignition delay time are determined. The relation of the ignition zone position in the vicinity of local heat sources and the intensity of combustible gas mixture warming has been elucidated. It has been found that when the distance between neighboring particles exceeds 1.5 hot particle size, an analysis of characteristics and regularities of coal ignition by several local heat sources can be carried out within the framework of the model of “single metal particle / grinded coal / air”. Besides, it has been shown with the use of this model that the increase in the hot particle height leads, along with the ignition delay time reduction, to a reduction of the source initial temperatures required for solid fuel ignition. At an imperfect thermal contact at the interface hot particle / grinded coal due to the natural porosity of the solid fuel structure, the intensity of ignition reduces due to a less significant effect of radiation in the area of pores on the heat transfer conditions compared to heat transfer by conduction in the near-surface coal layer without regard to its heterogeneous structure.
Journal
Thermophysics and Aeromechanics – Springer Journals
Published: Jul 1, 2017