Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Experimental study of shear stress during liquid flow in the model of fuel assembly

Experimental study of shear stress during liquid flow in the model of fuel assembly The original experimental data on axial distributions of the shear stress on the surface of a rod - a fuel element simulator - during fluid flow through a model of fuel assembly (FA) are presented depending on the rod diameter (9, 10, 15 mm), relative distance between the rods (1.2, 1.3, 1.4, 1.45), and number of rods (7 and 37) for the laminar, transient, and turbulent liquid flows in fuel assemblies. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Thermophysics and Aeromechanics Springer Journals

Experimental study of shear stress during liquid flow in the model of fuel assembly

Loading next page...
 
/lp/springer-journals/experimental-study-of-shear-stress-during-liquid-flow-in-the-model-of-Zh3l10hBSJ
Publisher
Springer Journals
Copyright
Copyright © N.A. Pribaturin, P.D. Lobanov, V.V. Randin, O.N. Kashinsky, M.A. Vorobyev, and S.M. Volkov 2020
ISSN
0869-8643
eISSN
1531-8699
DOI
10.1134/S0869864320060037
Publisher site
See Article on Publisher Site

Abstract

The original experimental data on axial distributions of the shear stress on the surface of a rod - a fuel element simulator - during fluid flow through a model of fuel assembly (FA) are presented depending on the rod diameter (9, 10, 15 mm), relative distance between the rods (1.2, 1.3, 1.4, 1.45), and number of rods (7 and 37) for the laminar, transient, and turbulent liquid flows in fuel assemblies.

Journal

Thermophysics and AeromechanicsSpringer Journals

Published: Mar 5, 2021

There are no references for this article.