Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Erratum to: Enhancing power generation of piezoelectric bimorph device through geometrical optimization

Erratum to: Enhancing power generation of piezoelectric bimorph device through geometrical... Front. Energy 2015, 9(2): 246–246 DOI 10.1007/s11708-015-0360-z ERRATUM Action NECHIBVUTE, Albert CHAWANDA, Pearson LUHANGA Enhancing power generation of piezoelectric bimorph device through geometrical optimization © Higher Education Press and Springer-Verlag Berlin Heidelberg 2015 Erratum to: Frontiers in Energy 2014, 8(1): 129–137 DOI: 10.1007/s11708-013-0289-z The original version of this article unfortunately contained two mistakes. (1) A mistake appeared in the Section “Conclusions”, Line 3–8, the right column of Page 135. The sentence “The fabricated optimized prototype device was experimentally characterized and showed that a maximum power density of 508 µW/cm could be delivered to a matched resistive load at resonance and under an ambient mechanical acceleration of 1 g.” should be changed to “The fabricated optimized prototype device was experimentally characterized and showed that a maximum power density of 2.65 mW/cm could be delivered to a matched resistive load at resonance and under an ambient mechanical acceleration of 1 g.” (2) A mistake appeared in the last row of Table 5, Page 136.The corrected table is given below. Table 5 Comparison of this research with some previously reported works 3 –3 –3 –2 Author Acceleration/g Frequency/Hz Power/μW Volume/cm Power density/(mW$m ) NPD/(mW$m $g ) Roundy [4] 0.25 60 335 1 http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png "Frontiers in Energy" Springer Journals

Erratum to: Enhancing power generation of piezoelectric bimorph device through geometrical optimization

Download PDF
1 page

Erratum to: Enhancing power generation of piezoelectric bimorph device through geometrical optimization

Abstract

Front. Energy 2015, 9(2): 246–246 DOI 10.1007/s11708-015-0360-z ERRATUM Action NECHIBVUTE, Albert CHAWANDA, Pearson LUHANGA Enhancing power generation of piezoelectric bimorph device through geometrical optimization © Higher Education Press and Springer-Verlag Berlin Heidelberg 2015 Erratum to: Frontiers in Energy 2014, 8(1): 129–137 DOI: 10.1007/s11708-013-0289-z The original version of this article unfortunately contained two mistakes. (1) A mistake appeared in the Section...
Loading next page...
 
/lp/springer-journals/erratum-to-enhancing-power-generation-of-piezoelectric-bimorph-device-MoF4azNCOC

References (0)

References for this paper are not available at this time. We will be adding them shortly, thank you for your patience.

Publisher
Springer Journals
Copyright
2015 Higher Education Press and Springer-Verlag Berlin Heidelberg
ISSN
2095-1701
eISSN
2095-1698
DOI
10.1007/s11708-015-0360-z
Publisher site
See Article on Publisher Site

Abstract

Front. Energy 2015, 9(2): 246–246 DOI 10.1007/s11708-015-0360-z ERRATUM Action NECHIBVUTE, Albert CHAWANDA, Pearson LUHANGA Enhancing power generation of piezoelectric bimorph device through geometrical optimization © Higher Education Press and Springer-Verlag Berlin Heidelberg 2015 Erratum to: Frontiers in Energy 2014, 8(1): 129–137 DOI: 10.1007/s11708-013-0289-z The original version of this article unfortunately contained two mistakes. (1) A mistake appeared in the Section “Conclusions”, Line 3–8, the right column of Page 135. The sentence “The fabricated optimized prototype device was experimentally characterized and showed that a maximum power density of 508 µW/cm could be delivered to a matched resistive load at resonance and under an ambient mechanical acceleration of 1 g.” should be changed to “The fabricated optimized prototype device was experimentally characterized and showed that a maximum power density of 2.65 mW/cm could be delivered to a matched resistive load at resonance and under an ambient mechanical acceleration of 1 g.” (2) A mistake appeared in the last row of Table 5, Page 136.The corrected table is given below. Table 5 Comparison of this research with some previously reported works 3 –3 –3 –2 Author Acceleration/g Frequency/Hz Power/μW Volume/cm Power density/(mW$m ) NPD/(mW$m $g ) Roundy [4] 0.25 60 335 1

Journal

"Frontiers in Energy" – Springer Journals

Published: Jun 1, 2015

There are no references for this article.