Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Electronification of Work Hydraulics

Electronification of Work Hydraulics Hydraulics D E V E L O P M EN T Hy d R A u l I C s Electronification of Work Hydraulics The electronic fi ation of work hydraulics is key for the manufacturers of mobile machines, enabling them to comply with even stricter emissions standards while maintaining or improving performance and reducing complexity in construction and installation. In light of this development, Bosch Rexroth has come up with the Electronie fi d Open Circuit which was specially developed for use in mobile machines. It also forms the basis for smart electronically controlled vehicle functions such as e-load sensing. At the same time, OEMs can standardize their hardware by shifting functions to the software and thus reduce complexity. 34 Hydraulics A u T HOR the open circuit are the starting point here. For EOC, a single-axis electronically controllable hydraulic actuating element was developed. A pressure and swivel angle sensor record the current pump sta- tus and provide the data to the control unit. The software in the control unit takes over all control tasks and controls Michael Brand is Project Manager Electronification target/actual values internally. This is at Bosch Rexroth AG in Elchingen achieved on the basis http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png ATZoffhighway worldwide Springer Journals

Electronification of Work Hydraulics

ATZoffhighway worldwide , Volume 12 (1) – Mar 22, 2019

Loading next page...
 
/lp/springer-journals/electronification-of-work-hydraulics-oBRDAvs0FV
Publisher
Springer Journals
Copyright
Copyright © 2019 by Springer Fachmedien Wiesbaden GmbH
Subject
Engineering; Automotive Engineering
eISSN
2524-8774
DOI
10.1007/s41321-019-0005-y
Publisher site
See Article on Publisher Site

Abstract

Hydraulics D E V E L O P M EN T Hy d R A u l I C s Electronification of Work Hydraulics The electronic fi ation of work hydraulics is key for the manufacturers of mobile machines, enabling them to comply with even stricter emissions standards while maintaining or improving performance and reducing complexity in construction and installation. In light of this development, Bosch Rexroth has come up with the Electronie fi d Open Circuit which was specially developed for use in mobile machines. It also forms the basis for smart electronically controlled vehicle functions such as e-load sensing. At the same time, OEMs can standardize their hardware by shifting functions to the software and thus reduce complexity. 34 Hydraulics A u T HOR the open circuit are the starting point here. For EOC, a single-axis electronically controllable hydraulic actuating element was developed. A pressure and swivel angle sensor record the current pump sta- tus and provide the data to the control unit. The software in the control unit takes over all control tasks and controls Michael Brand is Project Manager Electronification target/actual values internally. This is at Bosch Rexroth AG in Elchingen achieved on the basis

Journal

ATZoffhighway worldwideSpringer Journals

Published: Mar 22, 2019

There are no references for this article.