Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/electric-arc-steam-plasma-generator-1SwfCM2K0L
References (27)
-
citation_title=for calculation of the linear plasmatorches, citation_publication_date= (1979)
for calculation of the linear plasmatorches -
MF Zhukov (1980)
of authorship No. 792614, cl. N05 V7/18. Electric-arc gas heater -
(2012)
Electric-arc steam heater with copper tubular electrodes, in: Contr -
(1980)
Analysis of operation of water-steam plasmatrons, in: Theses VIII All-Union Conf -
(1980)
Analysis of operation of water-steam plasmatrons -
GA Desyatkov (1999)
Electric-Arc Generators of Thermal Plasma -
(1972)
Investigation of characteristics of the electric arc blown by steam in plasmatron of bilateral expiration, in: Theses V All-Union Conf -
(1979)
Foundation for calculation of the linear plasmatorches -
(1985)
Effect of temperature of cylindrical electrodes on their erosion -
T Ma (2012)
Electric-arc steam heater with copper tubular electrodes -
H Maecker (1956)
Electric Arcs and Thermal Plasma -
(2013)
Thermal calculation of a composite tubular electrode in water-steam plasmatron -
M. Zhukov (1996)
Electric arc generators of thermal plasma (review)Plasma Devices and Operations, 5
-
(1980)
Electric-arc gas heater -
MG Kuzmin (2008)
Plasma Electrical Devices -
(1970)
Concerning construction of water plasma generators for rock crushing, in: Proc -
BM Kudasov (1974)
Energy characteristics of water plasmatorch, Theses VI All-Russian Conf. on Generators of Low-Temperature Plasma -
(1962)
Some research results on the properties of water stabilized arc -
VYa Lebedev (1972)
Investigation of parameters of the vortex plasmatorch on steam, in: Theses V All-Union Conf. on Generators of Low-Temperature Plasma. Vol. I -
(1997)
of authorship No -
VE Kasiyanov (1972)
Investigation of characteristics of the electric arc blown by steam in plasmatron of bilateral expiration -
(1956)
and H -
BI Mikhailov (2003)
Electric-arc generators of water-steam plasma. Part 2Thermophysics and Aeromechanics, 10
-
A. An'shakov, S. Radko, E. Urbakh, A. Urbakh, V. Faleev (2012)
Electric arc plasmatorch for steam heatingThermophysics and Aeromechanics, 19
-
(1970)
Investigation of thermal parameters of plasma burners working on air, air-water mixture, and steam -
(1977)
Investigation of linear electric-arc generators of water plasma, in: Proc -
AS Silv (2012)
Steam plasma torch with regenerative cooling, VII Int. Conf. Plasma Physics and Plasma Technology
- Publisher
- Springer Journals
- Copyright
- 2015 Pleiades Publishing, Ltd.
- ISSN
- 0869-8643
- eISSN
- 1531-8699
- DOI
- 10.1134/S0869864314010096
- Publisher site
- See Article on Publisher Site
Abstract
Abstract Investigation results on the arc plasmatorch for water-steam heating are presented. The construction arrangement of steam plasma generator with copper electrodes of the stepped geometry was firstly implemented. The energy characteristics of plasmatorch and erosion of electrodes reflect the features of their behavior at arc glow in the plasma-forming environment of steam. The results of numerical study of the thermal state of the composite copper-steel electrodes had a significant influence on optimization of anode water-cooling aimed at improvement of its operation life.
Journal
Thermophysics and Aeromechanics – Springer Journals
Published: Jan 1, 2015