Access the full text.
Sign up today, get DeepDyve free for 14 days.
P. Dash, S. Krishnan, R. Sharma, P. Banerjee, S. Haldar (2005)
Laboratory scale investigation to improve the productivity of stamp charge coke oven through optimisation of bulk density of coal cakeIsij International, 45
Ayse Benk, M. Talu, A. Çoban (2008)
Phenolic resin binder for the production of metallurgical quality briquettes from coke breeze: Part IFuel Processing Technology, 89
(2011)
Impact of binder on recovery stamp charged coke mak ing technology, METEC INSTEEL CON
(1991)
Stability of coal cake in stamp charging operation
A Benk, M Talu, A Cobun (2008)
Phenolic resin binder for the production of metallurgical quality briquettes from coke breeze: Part II the effect of the type of basic catalyst used in the resole production on the tensile strength of formed coke briquettesFuel Process Technology, 89
V. Arslan (2006)
Investigation of bonding mechanism of coking on semi-coke from lignite with pitch and tarEnergy & Fuels, 20
S. Krishnan, P. Dash, M. Guha, Deepak Kumar, D. Deshpande (2004)
Application of binder in Stamp charge coke makingIsij International, 44
S. Nomura, Kenjiro Kato, Tomoyuki Nakagawa, I. Komaki (2002)
The Effect of Plastic Addition on Coal Caking Properties.Journal of The Japan Institute of Energy, 81
M. Shkoller, Yu. Proshunin (2008)
Production of special coal bindersCoke and Chemistry, 51
HP Tiwari, PK Banerjee, SK Haldar (2011)
Impact of binder on recovery stamp charged coke making technology
S. Nomura, Kenjiro Kato, Tomoyuki Nakagawa, I. Komaki (2003)
The effect of plastic addition on coal caking properties during carbonizationFuel, 82
M. Asanuma, T. Ariyama, Michitaka Sato, R. Murai, Toshiharu Nonaka, Iwao Okochi, H. Tsukiji, K. Nemoto (2000)
Development of Waste Plastics Injection Process in Blast FurnaceIsij International, 40
A. Chatterjee, H. Prasad (1983)
Possibilities of tar addition to coal as a method of improving coke strengthFuel, 62
S. Nomura, Kenjiro Kato (2006)
The effect of plastic size on coke quality and coking pressure in the co-carbonization of coal/plastic in coke ovenFuel, 85
R. Loison (2013)
Coke: Quality and Production
S. Krishnan, R. Sharma, P. Dash, S. Haldar, B. Biswas (2006)
Use of waste plastics in cokemaking at Tata SteelIronmaking & Steelmaking, 33
M Tiwary, HN Prasad, BK Singh (1991)
Monogram on Stamp Charging Technology at Tata Steel
(2009)
Stamped coal cake in coke making technology; Part 2—the investigation of cake strength, Ironmaking Steelmaking
F Able, J Rosenkranz, HZ Kuyumcu (2009)
Stamped coal cake in coke making technology; Part 2-the investigation of cake strengthIronmaking Steelmaking, 00
Manuel Gonzalez-Cimas, J. Patrick, A. Walker (1987)
Influence of pitch additions on coal carbonization: Coke strength and structural propertiesFuel, 66
Masaji Kitamura, Haruhisa Iwakiri, T. Kamijo, K. Narita (1982)
Improvement of coke quality by addition of several binders, 41
(1991)
Expe rience in the stamp charged battery at Tata Steel, Mono gram on Stamp Charging Technology
The optimum stability of coal cake is essential for producing good quality of coke in stamp charged coke making process. A suitable binder named as ‘X7’ was identified to improve the stability of coal cake, oven throughput, coke quality and reduce specific energy consumption for stamp charged coke making process. Laboratory results show that addition of ‘X7’ in coal blend up to 0.10–0.50 percentage, improved the mechanical strength of coal cake by 3.0–5.0 percentage. Six hundred kg pilot plant trials show that addition of binder in the base coal blend improved coke quality in terms of CSR, M 40 and AMS significantly. Coke plant trials also show that ‘X7’ addition (0.10%) in base coal blend improved coke quality in terms of CSR (1.25 point), M 40 (0.9 point) and AMS (1.70 mm). Addition of ‘X7’ increased Coke End Temperature up to 24°C during plant trials. The increased in temperature saved energy approximately 11 000 Gcal and reduce CO2 emission by at least 10 000 T/Annum.
Coke and Chemistry – Springer Journals
Published: Apr 26, 2014
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.