Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/development-of-porous-lightweight-clay-bricks-using-a-replication-CuBz1aJ5jx
References (14)
-
Süleyman Akp, Dokuz Eylül (2009)
Kordiyerit esasl› silisyum karbür katk›l› köpük filtrelerin karakterizasyonu ve baz› mekanik özelliklerinin belirlenmesi Characterization and determination of certain mechanical properties of cordierite based silicon carbide added foam filters -
L. Gredmaier, C. Banks, R. Pearce (2011)
Calcium and sulphur distribution in fired clay brick in the presence of a black reduction core using micro X-ray fluorescence mappingConstruction and Building Materials, 25
-
Mucahit Sutcu, S. Akkurt (2009)
The use of recycled paper processing residues in making porous brick with reduced thermal conductivityCeramics International, 35
-
L. Vodová, R. Sokolář, Jitka Hroudová (2014)
The Effect of CaO Addition on Mechanical Properties of Ceramic TilesWorld Academy of Science, Engineering and Technology, International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering, 8
-
L. Jingjing, Yuanbing Li, Yawei Li, S. Sang, Shujing Li (2016)
Effects of pore structure on thermal conductivity and strength of alumina porous ceramics using carbon black as pore-forming agentCeramics International, 42
-
Gökhan Görhan, O. Simsek (2013)
Porous clay bricks manufactured with rice husksConstruction and Building Materials, 40
-
S. Kazmi, S. Abbas, M. Saleem, M. Munir, Anwar Khitab (2016)
Manufacturing of sustainable clay bricks: Utilization of waste sugarcane bagasse and rice husk ashesConstruction and Building Materials, 120
-
G. Cultrone, I. Sidraba, E. Sebastián (2005)
Mineralogical and physical characterization of the bricks used in the construction of the “Triangul Bastion”, Riga (Latvia)Applied Clay Science, 28
-
W. Pabst, E. Gregorová (2014)
Conductivity of porous materials with spheroidal poresJournal of The European Ceramic Society, 34
-
L Vodova, R Sokolar, J Hroudova (2014)
The effect of CaO addition on mechanical properties of ceramic tiles, International Journal of Civil, Environmental, StructuralConstr Archit Eng, 8
-
G. Cultrone, E. Sebastián, K. Elert, M. Torre, O. Cazalla, C. Navarro (2004)
Influence of mineralogy and firing temperature on the porosity of bricksJournal of The European Ceramic Society, 24
-
S. Veyseh, A. Yousefi (2003)
The Use of Polystyrene in Lightweight Brick Production, 12
-
K. Chiang, Ping-Huai Chou, Ching-Rou Hua, Kuang-Li Chien, C. Cheeseman (2009)
Lightweight bricks manufactured from water treatment sludge and rice husks.Journal of hazardous materials, 171 1-3
-
A. Eltmimi, L. Barron, A. Rafferty, J. Hanrahan, O. Fedyanina, E. Nesterenko, P. Nesterenko, B. Paull (2010)
Preparation, characterisation and modification of carbon-based monolithic rods for chromatographic applications.Journal of separation science, 33 9
- Publisher
- Springer Journals
- Copyright
- Copyright © 2017 by Australian Ceramic Society
- Subject
- Materials Science; Ceramics, Glass, Composites, Natural Materials; Materials Engineering; Inorganic Chemistry
- ISSN
- 2510-1560
- eISSN
- 2510-1579
- DOI
- 10.1007/s41779-017-0138-3
- Publisher site
- See Article on Publisher Site
Abstract
This study focused on porous lightweight clay bricks as a construction material as opposed to autoclaved aerated concrete and pumice blocks. Traditional clay bricks exhibit good stability against environmental conditions and are an economical alternative compared to other construction materials. Furthermore, clay bricks have better mechanical properties than autoclaved aerated concrete and pumice blocks but poorer thermal insulation properties; hence, their use in buildings is becoming increasingly unfavourable. This study focused on developing porous lightweight clay bricks with relatively better thermal insulation properties using a replication method.
Journal
Journal of the Australian Ceramic Society – Springer Journals
Published: Sep 21, 2017