Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Determination of sulfur and trace elements in petroleum coke by X-ray fluorescent spectrometry

Determination of sulfur and trace elements in petroleum coke by X-ray fluorescent spectrometry The content of sulfur, vanadium, and other trace elements in petroleum coke is determined by means of X-ray fluorescent spectrometry, without preliminary incineration of the samples. The inorganic composition (the content of sulfur and trace elements) is studied for ten petroleum-coke samples obtained in different industrial and laboratory conditions on the basis of West Siberian petroleum derivatives (heavy tars, asphalt, heavy catalytic-cracking gas-oil, and a mixture of heavy tars with the heavy gas-oil). The content of S, V, Ni, Ca, Si, Fe, Al, Mg, K, Na, Cu, Cr, and Zn is determined in all the samples. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Coke and Chemistry Springer Journals

Determination of sulfur and trace elements in petroleum coke by X-ray fluorescent spectrometry

Coke and Chemistry , Volume 60 (6) – Sep 21, 2017

Loading next page...
 
/lp/springer-journals/determination-of-sulfur-and-trace-elements-in-petroleum-coke-by-x-ray-8ZMO5a2bLt

References (15)

Publisher
Springer Journals
Copyright
Copyright © 2017 by Allerton Press, Inc.
Subject
Chemistry; Industrial Chemistry/Chemical Engineering
ISSN
1068-364X
eISSN
1934-8398
DOI
10.3103/S1068364X17060035
Publisher site
See Article on Publisher Site

Abstract

The content of sulfur, vanadium, and other trace elements in petroleum coke is determined by means of X-ray fluorescent spectrometry, without preliminary incineration of the samples. The inorganic composition (the content of sulfur and trace elements) is studied for ten petroleum-coke samples obtained in different industrial and laboratory conditions on the basis of West Siberian petroleum derivatives (heavy tars, asphalt, heavy catalytic-cracking gas-oil, and a mixture of heavy tars with the heavy gas-oil). The content of S, V, Ni, Ca, Si, Fe, Al, Mg, K, Na, Cu, Cr, and Zn is determined in all the samples.

Journal

Coke and ChemistrySpringer Journals

Published: Sep 21, 2017

There are no references for this article.