Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Design and Control of 6-DOF Mechanism for Twin-Frame Mobile Robot

Design and Control of 6-DOF Mechanism for Twin-Frame Mobile Robot A new lightweight six-legged robot that uses a simple mechanism and can move and work with high efficiency has been developed. This robot consists of two leg-bases with three legs each, and walks by moving each leg-base alternately. These leg-bases are connected to each other with a 6 degrees of freedom (DOF) mechanism. While designing this robot, the output force, velocity, and workspace of various connection mechanisms were compared, and the results showed that good performance could be achieved with a serial/parallel hybrid mechanism. The serial/parallel hybrid mechanism consists of three 6-DOF serially linked arms positioned with radial symmetry about the center of each leg-base; each leg-base is composed of two active and four passive joints. Walking experiments with this robot confirmed that this mechanism has satisfactory performance not only as a walking robot, but also as an active walking platform. Furthermore, in this robot, the entire leg-drive mechanism acts as a 6-axis force sensor, and individual sensors at the feet are not necessary. The forces and moments can be calculated from the changes in the joint angles. Experiments conducted verified that smooth contact with the ground by the swing-leg and successful switching from swing to support leg can be achieved using this force control and force measurement method. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Autonomous Robots Springer Journals

Design and Control of 6-DOF Mechanism for Twin-Frame Mobile Robot

Loading next page...
 
/lp/springer-journals/design-and-control-of-6-dof-mechanism-for-twin-frame-mobile-robot-DMp5p7ezwT

References (18)

Publisher
Springer Journals
Copyright
Copyright © 2001 by Kluwer Academic Publishers
Subject
Engineering; Robotics and Automation; Artificial Intelligence (incl. Robotics); Computer Imaging, Vision, Pattern Recognition and Graphics; Control, Robotics, Mechatronics
ISSN
0929-5593
eISSN
1573-7527
DOI
10.1023/A:1011287810340
Publisher site
See Article on Publisher Site

Abstract

A new lightweight six-legged robot that uses a simple mechanism and can move and work with high efficiency has been developed. This robot consists of two leg-bases with three legs each, and walks by moving each leg-base alternately. These leg-bases are connected to each other with a 6 degrees of freedom (DOF) mechanism. While designing this robot, the output force, velocity, and workspace of various connection mechanisms were compared, and the results showed that good performance could be achieved with a serial/parallel hybrid mechanism. The serial/parallel hybrid mechanism consists of three 6-DOF serially linked arms positioned with radial symmetry about the center of each leg-base; each leg-base is composed of two active and four passive joints. Walking experiments with this robot confirmed that this mechanism has satisfactory performance not only as a walking robot, but also as an active walking platform. Furthermore, in this robot, the entire leg-drive mechanism acts as a 6-axis force sensor, and individual sensors at the feet are not necessary. The forces and moments can be calculated from the changes in the joint angles. Experiments conducted verified that smooth contact with the ground by the swing-leg and successful switching from swing to support leg can be achieved using this force control and force measurement method.

Journal

Autonomous RobotsSpringer Journals

Published: Oct 19, 2004

There are no references for this article.