Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/combined-performance-of-polypropylene-fibre-and-weld-slag-in-high-2fI58xyMnC
References (21)
-
S. Aydın, B. Baradan (2013)
The effect of fiber properties on high performance alkali-activated slag/silica fume mortarsComposites Part B-engineering, 45
-
(1998)
American Concrete Institute) ACI 211.1-91 Standard Practice for Selecting Proportions for Normal -
(1987)
IS12269: Specification for 53 grade Ordinary Portland cement -
(1999)
Splitting Tensile strength of concrete -Method of test -
(2004)
High Performance Concrete. University De Sherbrooke, Quebec, Canada, First published 1998 by E & FN Spon, an imprint of Routledge -
N. Ganesan, P. Indira, M. Sabeena (2014)
Bond stress slip response of bars embedded in hybrid fibre reinforced high performance concreteConstruction and Building Materials, 50
-
(2013)
Submerged-arc welding slags: characterization and leaching strategies for the removal of aluminium and titanium -
A Ananthi, J Karthikeyan (2015)
Performance of polypropylene fibre in high-performance concreteProc. ICE-Construct. Mat., 168
-
(2002)
Methods of Testing bond in Reinforced Concrete -
Test Method for Density, Absorption, and Voids in Hardened Concrete -
(2013)
Effect of polypropylene fibre on durability of concrete composite containing fly ash and silica fume -
ASTM C 1116-03 Standard Specification for Fibre-Reinforced Concrete -
Harun Tanyildizi (2009)
Statistical analysis for mechanical properties of polypropylene fibre reinforced lightweight concrete containing silica fume exposed to high temperatureMater. Des., 30
-
(2017)
Statistical analysis for mechanical properties of polypropylene fibre reinforced lightweight concrete containing Fig. 5 Water absorption of HPC mixtures Fig. 6 Water absorption vs Sorptivity -
S. Ramesh, R. Gandhimathi, P. Nidheesh, S. Rajakumar, Subramani Prateepkumar (2013)
Use of furnace slag and welding slag as replacement for sand in concreteInternational Journal of Energy and Environmental Engineering, 4
-
Omer kreem (2012)
Influence of Concrete Mix Proportions and Curing Regimes on Density, Absorption, and Voids in Hardened ConcreteAL Rafdain Engineering Journal, 20
-
(2009)
silica fume exposed to high temperature -
C. Viana, D. Dias, J. Holanda, R. Paranhos (2009)
The use of submerged-arc welding flux slag as raw material for the fabrication of multiple-use mortars and bricksSoldagem & Inspecao, 14
-
(2004)
First published 1998 by E & FN Spon, an imprint of Routledge 11 New Fetter Lane -
Ulwant, Ingh, S. V., Ahni, P. S, andey (2009)
Slag Recycling in Submerged Arc Welding and its Influence on Chemistry of Weld Metal -
Interaction of silica fume and polypropylene fibres in high performance concrete
- Publisher
- Springer Journals
- Copyright
- Copyright © 2017 by The Institution of Engineers (India)
- Subject
- Engineering; Civil Engineering
- ISSN
- 2250-2149
- eISSN
- 2250-2157
- DOI
- 10.1007/s40030-017-0248-5
- Publisher site
- See Article on Publisher Site
Abstract
The effect of polypropylene fibre and weld slag on the mechanical properties of High Performance Concrete (HPC) containing silica fume as the mineral admixtures was experimentally verified in this study. Sixteen series of HPC mixtures(70 MPa) were designed with varying fibre fractions and Weld Slag (WS). Fibre added at different proportion (0, 0.1, 0.3 and 0.6%) to the weight of cement. Weld slag was substituted to the fine aggregate (0, 10, 20 and 30%) at volume. The addition of fibre decreases the slump at 5, 9 and 14%, whereas the substitution of weld slag decreases by about 3, 11 and 21% with respect to the control mixture. Mechanical properties like compressive strength, split tensile strength, flexural strength, Ultrasonic Pulse Velocity test (UPV) and bond strength were tested. Durability studies such as Water absorption and Sorptivity test were conducted to check the absorption of water in HPC. Weld slag of 10% and fibre dosage of 0.3% in HPC, attains the maximum strength and hence this combination is most favourable for the structural applications.
Journal
Journal of The Institution of Engineers (India): Series A – Springer Journals
Published: Nov 2, 2017