Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Automatic control system for processes at heat station

Automatic control system for processes at heat station Abstract The paper considers a real project for equipping Heat Station No. 1 (Scientific Center of SB RAS) with automatic control system. The project for ASC HS has three-level hierarchy: the top level is a display of information on the screens of WKS, data and reports archiving; the middle level is the taking of signals from sensors, processing and sending to WKS, the lower level is the signal generation (signals must correspond to the measured physical parameters). The general structure of a complex of hardware and software for ASC HS was considered. The examples of tasks solved by the automatic system are presented, including the task of combustion diagnostics and control. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Thermophysics and Aeromechanics Springer Journals

Automatic control system for processes at heat station

Loading next page...
 
/lp/springer-journals/automatic-control-system-for-processes-at-heat-station-ygYTiQltOE

References (5)

Publisher
Springer Journals
Copyright
2006 V.V. Garkusha, B.N. Pishchik, V.P. Mikheev, and O.I. Potaturkin
ISSN
0869-8643
eISSN
1531-8699
DOI
10.1134/S0869864306020119
Publisher site
See Article on Publisher Site

Abstract

Abstract The paper considers a real project for equipping Heat Station No. 1 (Scientific Center of SB RAS) with automatic control system. The project for ASC HS has three-level hierarchy: the top level is a display of information on the screens of WKS, data and reports archiving; the middle level is the taking of signals from sensors, processing and sending to WKS, the lower level is the signal generation (signals must correspond to the measured physical parameters). The general structure of a complex of hardware and software for ASC HS was considered. The examples of tasks solved by the automatic system are presented, including the task of combustion diagnostics and control.

Journal

Thermophysics and AeromechanicsSpringer Journals

Published: Jun 1, 2006

There are no references for this article.