Get 20M+ Full-Text Papers For Less Than $1.50/day. Start a 14-Day Trial for You or Your Team.

Learn More →

Analysis and optimization of gas-thermal spray process in terms of condensed phase velocity and temperature

Analysis and optimization of gas-thermal spray process in terms of condensed phase velocity and... Abstract The paper presents the experimental results for velocity and tempertaure disibutions of the condensed phase in a plasma jet from the plasmatorch PNK-50 (design from ITAM SB RAS, Novosibirsk). The plasma jet is used at different operational modes for thermal spraying of nickel alloy powder PR-NKh16SR3. The measurements for average velocity (230–280 m/s) and temperature (2290–2410 K) of sprayed particles were matched to data on microhardness (630–710 HV) and porosity (1.7–13.5 %) of samples. Results were transferred into coating properties maps plotted in coordinates “arc current vs. torch offset” and “particle velocity vs. particle temperature”. Experiments demonstrated the change in parameters of condensed phase in the jet after performimg of maintenance job for the plasmatorch. We propose the method for adjusting the operational parameters of thermal spraying equipment using optical methods of control for particle velocity and particle temperature. The exemplary apparatus function of the plasmatorch was plotted; an approach is proposed for optimization and transfer of spraying technology of coatings with specified properties between equipment from different manufacturers, different class and power. http://www.deepdyve.com/assets/images/DeepDyve-Logo-lg.png Thermophysics and Aeromechanics Springer Journals

Analysis and optimization of gas-thermal spray process in terms of condensed phase velocity and temperature

Loading next page...
 
/lp/springer-journals/analysis-and-optimization-of-gas-thermal-spray-process-in-terms-of-ahGDiNuNGv

References (49)

Publisher
Springer Journals
Copyright
2017 Pleiades Publishing, Ltd.
ISSN
0869-8643
eISSN
1531-8699
DOI
10.1134/S0869864317010097
Publisher site
See Article on Publisher Site

Abstract

Abstract The paper presents the experimental results for velocity and tempertaure disibutions of the condensed phase in a plasma jet from the plasmatorch PNK-50 (design from ITAM SB RAS, Novosibirsk). The plasma jet is used at different operational modes for thermal spraying of nickel alloy powder PR-NKh16SR3. The measurements for average velocity (230–280 m/s) and temperature (2290–2410 K) of sprayed particles were matched to data on microhardness (630–710 HV) and porosity (1.7–13.5 %) of samples. Results were transferred into coating properties maps plotted in coordinates “arc current vs. torch offset” and “particle velocity vs. particle temperature”. Experiments demonstrated the change in parameters of condensed phase in the jet after performimg of maintenance job for the plasmatorch. We propose the method for adjusting the operational parameters of thermal spraying equipment using optical methods of control for particle velocity and particle temperature. The exemplary apparatus function of the plasmatorch was plotted; an approach is proposed for optimization and transfer of spraying technology of coatings with specified properties between equipment from different manufacturers, different class and power.

Journal

Thermophysics and AeromechanicsSpringer Journals

Published: Jan 1, 2017

There are no references for this article.