Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/springer-journals/a-unified-power-electronic-controller-for-wind-driven-grid-connected-AElPg91499
References (29)
-
G. Raina, Om Malik (1986)
Wind Power System Using an Adaptive Sherbius Induction MachineIEEE Transactions on Aerospace and Electronic Systems, AES-22
-
R. Cárdenas, R. Peña, G. Asher, J. Clare, R. Giménez (2004)
Control strategies for power smoothing using a flywheel driven by a sensorless vector-controlled induction machine operating in a wide speed rangeIEEE Transactions on Industrial Electronics, 51
-
Ermis M. Communication angle analysis of a double output induction generator operating in sub- and super-synchronous modes. In Cadirci I (1994)
Proceedings of the 7th Mediterranean Electrotechnical Conference. AntalyaProceedings of the 7th Mediterranean Electrotechnical Conference
-
H. Battista, P. Puleston, R. Mantz, C. Christiansen (2000)
Sliding mode control of wind energy systems with DOIG-power efficiency and torsional dynamics optimizationIEEE Transactions on Power Systems, 15
-
B. Beltran, T. Ahmed-Ali, M. Benbouzid (2007)
Sliding Mode Power Control of Variable-Speed Wind Energy Conversion SystemsIEEE Transactions on Energy Conversion, 23
-
M. Uctug, I. Eskandarzadeh, H. Ince (1994)
Modelling and output power optimisation of a wind turbine driven double output induction generator, 141
-
J. Dixon, L. Morán, José Rodríguez, Ricardo Domke (2005)
Reactive Power Compensation Technologies: State-of-the-Art ReviewProceedings of the IEEE, 93
-
Z. Salameh, Sun-Run Wang (1989)
Microprocessor Control of Double Output Induction Generator, Part I: Inverter Firing CircuitIEEE Power Engineering Review, 9
-
L. Refoufi, B. Zahawi, A. Jack (1999)
Analysis and modeling of the steady state behavior of the static Kramer induction generatorIEEE Transactions on Energy Conversion, 14
-
M. Ermis H. F. Bilgin (2007)
Reactive-power compensation of coal mining excavators by using a new-generation STATCOMIEEE Transactions on Industry Applications, 43
-
V. T. Ranganathan R. Datta (2003)
A method of tracking the peak power points for a variable speed wind energy conversion systemIEEE Transactions on Energy Conversion, 18
-
B. Beltran, M. Benbouzid, T. Ahmed-Ali (2012)
Second-Order Sliding Mode Control of a Doubly Fed Induction Generator Driven Wind TurbineIEEE Transactions on Energy Conversion, 27
-
S. Papathanassiou, M. Papadopoulous (2001)
Mechanical Stresses in Fixed-Speed Wind Turbines Due to Network DisturbancesIEEE Power Engineering Review, 21
-
R. Mahanty (2008)
Large value AC capacitor for harmonic filtering and reactive power compensationIet Generation Transmission & Distribution, 2
-
I. Çadırcı, M. Ermiş (1992)
Double-output induction generator operating at subsynchronous and supersynchronous speeds: steady-state performance optimisation and wind-energy recovery, 139
-
R. Fadaeinedjad, M. Moallem, G. Moschopoulos (2008)
Simulation of a Wind Turbine With Doubly Fed Induction Generator by FAST and SimulinkIEEE Transactions on Energy Conversion, 23
-
G. Moon (1999)
Predictive current control of distribution static compensator for reactive power compensation, 146
-
Craigc Johnson, Richardt Smith (1976)
Dynamics of Wind Generators on Electric Utility NetworksIEEE Transactions on Aerospace and Electronic Systems, AES-12
-
N. Ammasaigounden, M. Subbiah (1990)
Microprocessor-based voltage controller for wind-driven induction generatorsIEEE Transactions on Industrial Electronics, 37
-
I. Cadirei, M. Ermiş (1998)
Performance evaluation of a wind driven DOIG using a hybrid modelIEEE Transactions on Energy Conversion, 13
-
R. Takahashi, H. Kinoshita, T. Murata, J. Tamura, M. Sugimasa, A. Komura, M. Futami, M. Ichinose, K. Ide (2010)
Output Power Smoothing and Hydrogen Production by Using Variable Speed Wind GeneratorsIEEE Transactions on Industrial Electronics, 57
-
T. Yang (2008)
Initial study of using rechargeable batteries in wind power generation with variable speed induction generatorsIet Renewable Power Generation, 2
-
R. Datta, V. Ranganathan (2002)
A Method of Tracking the Peak Power Points for a Variable Speed Wind Energy Conversion SystemIEEE Power Engineering Review, 22
-
Liyan Qu, W. Qiao (2011)
Constant Power Control of DFIG Wind Turbines With Supercapacitor Energy StorageIEEE Transactions on Industry Applications, 47
-
H. Bilgin, M. Ermiş, K. Kose, A. Cetin, I. Çadırcı, A. Açik, A. Terciyanli, C. Kocak, M. Yorukoglu (2005)
Reactive power compensation of coal mining excavators by using a new generation STATCOMFourtieth IAS Annual Meeting. Conference Record of the 2005 Industry Applications Conference, 2005., 1
-
R. Cárdenas, R. Peña, Greg Asher, Jon Clare (2004)
Power smoothing in wind generation systems using a sensorless vector controlled induction Machine driving a flywheelIEEE Transactions on Energy Conversion, 19
-
M. P. Papadopoulos S. A. Papathanassiou (2001)
Mechanical stresses in fixed-speed wind turbines due to network disturbancesIEEE Transactions on Energy Conversion, 16
-
O. Wasynczuk (1994)
Analysis of line-commutated converters during unbalanced operating conditionsIEEE Transactions on Energy Conversion, 9
-
I. Çadırcı, M. Ermiş (1994)
Communication angle analysis of a double output induction generator operating in sub- and super-synchronous modesProceedings of MELECON '94. Mediterranean Electrotechnical Conference
- Publisher
- Springer Journals
- Copyright
- 2013 Higher Education Press and Springer-Verlag Berlin Heidelberg
- ISSN
- 2095-1701
- eISSN
- 2095-1698
- DOI
- 10.1007/s11708-012-0229-3
- Publisher site
- See Article on Publisher Site
Abstract
Abstract The implementation of a simple power converter for a wound rotor induction generator employing a three phase diode bridge rectifier and a line commutated inverter in the rotor circuit for super synchronous speeds has been proposed. The detailed working of the system in power smoothing mode and maximum power point tracking mode is presented. The current flow in the rotor circuit is controlled (by controlling the firing angle of the line commutated inverter) for controlling the stator power in both the modes. An 8 bit PIC microcontroller has been programmed to vary the firing angle of the line commutated inverter. Experiments have been carried out on a 3-phase, 3.73 kW, 400 V, 50 Hz, 4-pole, 1500 r/min wound rotor induction generator and the results obtained with the generator supplying power in both the modes are furnished. The complete scheme has been modeled using MATLAB/SIMULINK blocks and a simulation study has been conducted. The experimental waveforms are compared with the simulation results and a very close agreement between them is observed.
Journal
"Frontiers in Energy" – Springer Journals
Published: Mar 1, 2013