Access the full text.
Sign up today, get DeepDyve free for 14 days.
Y. Her, E. Matijevi, M. Chon (1995)
Preparation of well-defined colloidal barium titanate crystals by the controlled double-jet precipitationJournal of Materials Research, 10
H. Hsieh, T. Fang (1989)
Effects of Powder Processing on the Green Compacts of High‐Purity BaTiO3Journal of the American Ceramic Society, 72
T. Pannaparayil, R. Marande, S. Komarneni (1991)
Magnetic properties of high‐density Mn‐Zn ferritesJournal of Applied Physics, 69
G. Tomandl (1992)
Ceramic Materials for Electronics: Processing, Properties, and Applications, Second Edition, Revised and Expanded (Electrical Engineering and Electronics Series/72) Edited by: Relva C. Buchanan. Marcel Dekker, Inc., 270 Madison Avenue, New York, N.Y. 10016, Published: 1991, 531 Pages. Preis: 166.75
R. Buscall, T. Corner (1986)
Random copolymers as dispersion stabilisers part 2. Adsorption onto latices and stabilisationColloids and Surfaces, 17
T. Pannaparayil, S. Komarneni, R. Marande, M. Zadarko (1990)
Subdomain zinc ferrite particles: Synthesis and characterizationJournal of Applied Physics, 67
N. Ichinose, Y. Ozaki, S. Kashū (1991)
Superfine Particle Technology
R. Klimpel (1982)
The influence of a chemical dispersant on the sizing performance of a 24-in. hydrocyclonePowder Technology, 31
R. Mitra, R. Puri, R. Mendiratta (1992)
Upgrading magnetic properties of hot-pressed Ni-Zn-Li ferritesJournal of Materials Science Letters, 11
T. Sugimoto (1987)
Preparation of monodispersed colloidal particlesAdvances in Colloid and Interface Science, 28
E. Ryshkewitch (1960)
Oxide Ceramics: Physical Chemistry and Technology;
J. Gross (1938)
Crushing and Grinding
I. Chen, G. Hassold, D. Srolovitz (1990)
Computer Simulation of Final-Stage Sintering: II, Influence of Initial Pore SizeJournal of the American Ceramic Society, 73
(1979)
Sintering-New developments
J. Kitchener (1992)
Minerals and surfacesDevelopments in mineral processing, 12
M. Chu, Mohamed Rahaman, L. Jonghe, Richard Brook (1991)
Effect of Heating Rate on Sintering and CoarseningJournal of the American Ceramic Society, 74
G. Hassold, I. Chen, D. Srolovitz (1990)
Computer Simulation of Final‐Stage Sintering: I, Model Kinetics, and MicrostructureJournal of the American Ceramic Society, 73
J. McKetta, W. Cunningham, G. Weismantel, R. Anthony (1976)
Encyclopedia of Chemical Processing and Design
J. Lee, Jin Hwang, J. Mashek, T. Mason, A. Miller, Richard Siegel (1995)
Impedance spectroscopy of grain boundaries in nanophase ZnOJournal of Materials Research, 10
W. Schatt, E. Friedrich (1982)
Sintering as a result of defect structureCrystal Research and Technology, 17
E. Snelling (1969)
Soft ferrites: properties and applications
P. Pandya, H. Joshi, R. Kulkarni (1991)
Bulk magnetic properties of Co-Zn ferrites prepared by the co-precipitation methodJournal of Materials Science, 26
C. Williams, D. Chrisey, P. Lubitz, K. Grabowski, C. Cotell (1994)
The magnetic and structural properties of pulsed laser deposited epitaxial MnZn–ferrite filmsJournal of Applied Physics, 75
W. Dawson (1988)
Hydrothermal synthesis of advanced ceramic powdersAmerican Ceramic Society Bulletin, 67
H. El-Shall, P. Somasundaran (1984)
Mechanisms of grinding modification by chemical additives: organic reagentsPowder Technology, 38
H. El-Shall, P. Somasundaran (1984)
Physico-chemical aspects of grinding: a review of use of additivesPowder Technology, 38
R. Mitra, R. Puri, R. Mendiratta (1992)
Magnetic and electrical properties of hot-pressed Ni-Zn-Li ferritesJournal of Materials Science, 27
B. Pamplin (1981)
Preparation and properties of solid state materials: Edited by William R. Wilcox Marcel Dekker Inc., New York and BaselProgress in Crystal Growth and Characterization, 2
T. Kodama, T. Itoh, M. Tabata, Y. Tamaura (1991)
High‐vacancy‐content ferrite with fine particlesJournal of Applied Physics, 69
D. Richerson (2018)
Modern ceramic engineering: Properties, processing and use in design
S. Risbud, Chien-Hua Shan, A. Mukherjee, Moon Kim, J. Bow, R. Holl (1995)
Retention of nanostructure in aluminum oxide by very rapid sintering at 1150 °CJournal of Materials Research, 10
M. Hammond, S. Ravitz (1963)
Influence of Environment on Brittle Fracture of SilicaJournal of the American Ceramic Society, 46
M. Marco, Xingwu Wang, R. Snyder, J. Simmins, S. Bayya, M. White, M. Naughton (1993)
Mössbauer and magnetization studies of nickel ferritesJournal of Applied Physics, 73
R. KlimpelRichard (1982)
Laboratory studies of the grinding and rheology of coal—water slurries☆Powder Technology, 32
Theories and applications associated with sintering of ceramics and reducing of sintering temperature are reviewed. The whole sintering process is divided into three sub-processes as powder preparation, compaction and sintering, and each sub-process is discussed in terms of its possible contribution to the reducing of sintering temperature. New approach for practical optimization of sintering process is investigated. The application of above in the Low Temperature Co-fired Ceramics (LTCC) is discussed. Meanwhile, many successful applications in reducing the sintering temperatures are presented.
Advanced Performance Materials – Springer Journals
Published: Sep 28, 2004
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.