Access the full text.
Sign up today, get DeepDyve free for 14 days.
B. Moaveni, A. Stavridis, G. Lombaert, J. Conte, P. Shing (2013)
Finite-Element Model Updating for Assessment of Progressive Damage in a 3-Story Infilled RC FrameJournal of Structural Engineering-asce, 139
M. Kawaguchi, M. Abe, I. Tatemichi (1999)
Design, tests and realization of suspen-dome systemJournal- International Association for Shell and Spatial Structures, 40
(2012)
Research on effect of sliding between hoop cable and cable-strut joint on behavior of suspen-dome structures
(2006)
Structural health monitoring via measured Ritz vectors utilizing artificial
M. Kawaguchi, M. Abe, Tatsuo Hatato, I. Tatemichi, S. Fujiwara, Hiroaki Matsufuji, Hiroyuki Yoshida, Y. Anma (1994)
Structural tests on the "suspen-dome" system.
Zhi-hong Zhang, Q. Cao, S. Dong, Xueyi Fu (2008)
STRUCTURAL DESIGN OF A PRACTICAL SUSPENDOME
(1999)
Design and application of neural networks, Shokodo, Tokyo, chapter 3 (in Japanese)
W. Dong, T. Moan, Z. Gao (2012)
Fatigue reliability analysis of the jacket support structure for offshore wind turbine considering the effect of corrosion and inspectionReliab. Eng. Syst. Saf., 106
Pierre Tonnelier, D. Millet, S. Richir, M. Lecoq (2005)
Is it possible to evaluate the recovery potential earlier in the design process? Proposal of a qualitative evaluation toolJournal of Engineering Design, 16
Ching-Piao Tsai, Chang Lin, Jiajun Shen (2002)
Neural network for wave forecasting among multi-stationsOcean Engineering, 29
Jiamin Guo, Dai Zhou (2016)
Pretension simulation and experiment of a negative Gaussian curvature cable domeEngineering Structures, 127
W. Kang, Zhihua Chen, H. Lam, C. Zuo (2003)
Analysis and design of the general and outmost-ring stiffened suspen-dome structuresEngineering Structures, 25
(2009)
Morphological analysis of suspend-dome structures and its practical analysis method
S. Kitipornchai, W. Kang, H. Lam, F. Albermani (2005)
Factors affecting the design and construction of Lamella suspen-dome systemsJournal of Constructional Steel Research, 61
S. Pellegrino (1992)
A Class of Tensegrity DomesInternational Journal of Space Structures, 7
(2016)
2016) Force finding of suspended-domes using back propagation (BP) algorithm
H. Lam, Jia‐Hua Yang (2015)
Bayesian structural damage detection of steel towers using measured modal parametersEarthquakes and Structures, 8
Jiamin Guo, Xing-fei Yuan, Zhixin Xiong, S. Dong (2016)
FORCE FINDING OF SUSPENDED-DOMES USING BACK PROPAGATION (BP) ALGORITHM
Zhi-qiang Li, Zhi-hong Zhang, S. Dong, Xueyi Fu (2012)
CONSTRUCTION SEQUENCE SIMULATION OF A PRACTICAL SUSPEN-DOME IN JINAN OLYMPIC CENTER
Wu Jian-ting (2008)
Experimental research on tension process of suspen-dome structural model
D. Marquardt (1963)
An Algorithm for Least-Squares Estimation of Nonlinear ParametersJournal of The Society for Industrial and Applied Mathematics, 11
D. Shi-lin (2011)
FRICTION ANALYSIS OF CONTINUOUS HOOP CABLE IN SUSPEND-DOMEEngineering mechanics
(1998)
On structures of supervised linear basis function feed forward three - layer neural networks
H. Lam, C. Ng (2008)
The selection of pattern features for structural damage detection using an extended Bayesian ANN algorithmEngineering Structures, 30
H. Lam, Jia‐Hua Yang, S. Au (2015)
Bayesian model updating of a coupled-slab system using field test data utilizing an enhanced Markov chain Monte Carlo simulation algorithmEngineering Structures, 102
X. Zhuo, Guofan Zhang, K. Ishikawa, Daoan Lou (2008)
Tensile force correction calculation method for prestressed construction of tension structuresJournal of Zhejiang University-SCIENCE A, 9
Xingwang Guo (2011)
Simulating Modulated Thermography of Cladding Debond in Solid RocketsJournal of Mechanical Engineering, 47
Zhihua Chen, Y. Wu, Y. Yin, C. Shan (2010)
Formulation and application of multi-node sliding cable element for the analysis of Suspen-Dome structuresFinite Elements in Analysis and Design, 46
Zhao Xiao-xu (2009)
Modification of calculation model of suspendome based on measured dataJournal of Engineering Design
Gui-bo Nie, F. Fan, X. Zhi (2013)
Test on the Suspended Dome Structure and Joints of Dalian GymnasiumAdvances in Structural Engineering, 16
K. Yuen, H. Lam (2006)
On the complexity of artificial neural networks for smart structures monitoringEngineering Structures, 28
H. Lam, K. Yuen, J. Beck (2006)
Structural Health Monitoring via Measured Ritz Vectors Utilizing Artificial Neural NetworksComputer‐Aided Civil and Infrastructure Engineering, 21
(2011)
Establishing and application of cable-sliding criterion equation
Qin Jie (2007)
The prestress loss analysis of cable-strut joint of the badminton gymnasium for 2008 Olympic GamesJournal of Building Structures
T. Yin, H. Lam, H. Chow, Hong-ping Zhu (2009)
Dynamic reduction-based structural damage detection of transmission tower utilizing ambient vibration dataEngineering Structures, 31
Hongbo Liu, Zhihua Chen, Ting Zhou (2012)
Research on the Process of Pre-Stressing Construction of Suspen-Dome considering Temperature EffectAdvances in Structural Engineering, 15
G. Lewicki, G. Marino (2003)
Approximation by Superpositions of a Sigmoidal FunctionZeitschrift Fur Analysis Und Ihre Anwendungen, 22
(1999)
Design , test , and realization of ‘ ‘ suspend - dome ’ ’ system
Q. Cao, Zhi-hong Zhang (2010)
A simplified strategy for force finding analysis of suspendomesEngineering Structures, 32
Jixiang Xu, Jin-cheng Zhao, W. Wang, Minglu Liu (2013)
Prediction of temperature of tubular truss under fire using artificial neural networksFire Safety Journal, 56
Hongbo Liu, Zhihua Chen (2012)
Structural behavior of the suspen-dome structures and the cable dome structures with sliding cable jointsStructural Engineering and Mechanics, 43
Jiamin Guo, Xing-fei Yuan, Y. Li, S. Dong (2014)
A Simple Approach for Force Finding Analysis of Suspended-Domes Based on the Superposition PrincipleAdvances in Structural Engineering, 17
Differences between the practical suspended-dome and the corresponding numerical model are inevitable. To reduce the existing discrepancy, model updating of a suspended-dome was investigated using the back-propagation network in the article. The article first proposed a method to increase the prediction precision of back-propagation network: reducing the range of the training data for the back-propagation network according to the previous prediction results continuously. Then, some parameters that can be measured are updated by the corresponding measured values directly, and other parameters that cannot be directly measured are updated by the corresponding prediction values from back-propagation network. The results indicate that the updated model can predict the experimental model perfectly, and back-propagation network is effective and accurate to predict the given parameters that cannot be described by an algorithm. The results also confirm that the proposed method to increase the prediction precision of back-propagation network is valid.
Advances in Structural Engineering – SAGE
Published: Nov 1, 2017
Read and print from thousands of top scholarly journals.
Already have an account? Log in
Bookmark this article. You can see your Bookmarks on your DeepDyve Library.
To save an article, log in first, or sign up for a DeepDyve account if you don’t already have one.
Copy and paste the desired citation format or use the link below to download a file formatted for EndNote
Access the full text.
Sign up today, get DeepDyve free for 14 days.
All DeepDyve websites use cookies to improve your online experience. They were placed on your computer when you launched this website. You can change your cookie settings through your browser.