Access the full text.
Sign up today, get DeepDyve free for 14 days.
Loading next page...
/lp/sage/low-cycle-fatigue-life-evaluation-of-buckling-restrained-braces-based-nNswFGR6l3
References (51)
-
(2009)
Developing high-performance buckling-restrained braces -
Weijie Zhang, Chen Han, Lianzhen Zhang, Jiuchuan Wei, Huiyong Yin, Weiwei Han, Chao Xie, Wenwu Zhou (2019)
Grouting Mechanism of Cement-Based Slurry in a Concentric Annulus under High Groundwater PressureAdvances in Civil Engineering
-
J. Erochko, C. Christopoulos, R. Tremblay, Hyunhoon Choi (2011)
Residual Drift Response of SMRFs and BRB Frames in Steel Buildings Designed according to ASCE 7-05Journal of Structural Engineering-asce, 137
-
H. Krawinkler, Mahmud Zohrei (1983)
Cumulative damage in steel structures subjected to earthquake ground motionsComputers & Structures, 16
-
(2004)
Research and application of double - core buckling restrained braces in Tai -
Zhao Fang, Ai-qun Li, S. Shen, Wanrun Li (2018)
Low-cycle fatigue test and life assessment of carbon structural steel GB Q235B butt joints and cruciform jointsAdvances in Structural Engineering, 22
-
G. Corte, M. D’Aniello, R. Landolfo (2015)
Field Testing of All-Steel Buckling-Restrained Braces Applied to a Damaged Reinforced Concrete BuildingJournal of Structural Engineering-asce, 141
-
R. Sabelli, S. Mahin, Chunho Chang (2003)
Seismic demands on steel braced frame buildings with buckling-restrained bracesEngineering Structures, 25
-
(2014)
Experimental and practical study on bucklingrestrained brace with concrete-filled steel tubes -
(2011)
Experimental study on buckling-restrained braces with different gaps -
(2000)
Fatigue properties of practical-scale unbonded braces. Nippon steel technical report -
(2011)
Experimental study on buckling-restrained braces with different gaps. MSc Thesis, Southeast University, Nanjing, China -
J. Malley, L. Arber (2018)
An Overview of the Changes to AISC 341—Seismic Provisions for Structural Steel Buildings -
Guo Xiaokang (2011)
Development And Experimental Study on Domestic TJI Buck-restrained BraceJournal of Tongji University
-
F. Sun, Guoqiang Li, Xiao-Kang Guo, Dazhu Hu, Bao-wen Hu (2011)
Development of New-Type Buckling-Restrained Braces and Their Application in Aseismic Steel FrameworksAdvances in Structural Engineering, 14
-
(2018)
Fanaie N and Zarifpour A (2018) Probabilistic seismic demand assessment of steel frames braced with reduced -
L. Fahnestock, J. Ricles, R. Sause (2007)
Experimental Evaluation of a Large-Scale Buckling-Restrained Braced FrameJournal of Structural Engineering-asce, 133
-
Chen Quan, Chun‐Lin Wang, Meng Shaoping, Zeng Bin (2016)
Effect of the unbonding materials on the mechanic behavior of all-steel buckling-restrained bracesEngineering Structures, 111
-
Chao Tong, Jing Wu, Kun Hua, Luqi Xie (2020)
Low-Cycle Fatigue Life Estimation Curve for Buckling-Restrained Braces Based on Cumulative Plastic DeformationJournal of Earthquake Engineering, 26
-
(2006)
An experimental study of antibuckling steel damping-braces -
(2003)
NEHRP recommended provisions for seismic regulations for new buildings and other structures -
L. Carden, Ahmad Itani, I. Buckle (2006)
Seismic Performance of Steel Girder Bridges with Ductile Cross Frames Using Buckling-Restrained BracesJournal of Structural Engineering-asce, 132
-
T. Usami, Chun‐Lin Wang, J. Funayama (2011)
Low-Cycle Fatigue Tests of a Type of Buckling Restrained BracesProcedia Engineering, 14
-
M. Jia, D. Lu, Lin Sun, Sumei Zhang (2014)
Performance Testing and Cyclic Behavior of Buckling-Restrained Braces with H Cross Section Unrestrained SegmentsAdvances in Structural Engineering, 17
-
C. Black, N. Makris, I. Aiken (2004)
Component Testing, Seismic Evaluation and Characterization of Buckling-Restrained BracesJournal of Structural Engineering-asce, 130
-
(2019)
Pseudo dynamic test of a deficient RC frame strengthened with buckling restrained braces -
Chun‐Lin Wang, Chen Quan, Zeng Bin, Meng Shaoping (2017)
A novel brace with partial buckling restraint: An experimental and numerical investigationEngineering Structures, 150
-
M. Adeli, M. Banazadeh, A. Deylami, M. Alinia (2012)
Introducing a New Spectral Intensity Measure Parameter to Estimate the Seismic Demand of Steel Moment-Resisting Frames Using Bayesian StatisticsAdvances in Structural Engineering, 15
-
W. Li, Bin Wu, Yong Ding, Junxian Zhao (2017)
Experimental performance of buckling-restrained braces with steel cores of H-section and half-wavelength evaluation of higher-order local bucklingAdvances in Structural Engineering, 20
-
L. Coffin (1954)
A Study of the Effects of Cyclic Thermal Stresses on a Ductile MetalJournal of Fluids Engineering
-
F. Freddi, E. Tubaldi, L. Ragni, A. Dall'asta (2012)
Probabilistic performance assessment of low‐ductility reinforced concrete frames retrofitted with dissipative bracesEarthquake Engineering & Structural Dynamics, 42
-
Y. Mizutani, M. Ohta, A. Todoroki (2012)
Effect of Plastic Strain on Low-Cycle Fatigue Life and Fatigue Damage Detection -
Yong Li, Ye Liu, S. Meng (2018)
Seismic performance evaluation of coupled wall system with novel replaceable steel truss coupling beamsAdvances in Structural Engineering, 22
-
Jiaguang Zhang, Bin Wu, Yang Mei, P. Shing (2015)
Experimental and Analytical Studies on a Reinforced Concrete Frame Retrofitted with Buckling-Restrained Brace and Steel CagingAdvances in Structural Engineering, 18
-
(2005)
Toward earthquake-resistant design of concentrically braced steel-frame structures -
L. Fahnestock, R. Sause, J. Ricles (2007)
Seismic Response and Performance of Buckling-Restrained Braced FramesJournal of Structural Engineering-asce, 133
-
R. Ozçelik, Elif Erdil (2019)
Pseudodynamic Test of a Deficient RC Frame Strengthened with Buckling Restrained BracesEarthquake Spectra, 35
-
S. Manson (1953)
Behavior of materials under conditions of thermal stress -
Blake Andrews, L. Fahnestock, Junho Song (2009)
Ductility capacity models for buckling-restrained bracesJournal of Constructional Steel Research, 65
-
K. Tsai, J. Lai, Y. Hwang, Shengtao Lin, C. Weng (2002)
RESEARCH AND APPLICATION OF DOUBLE-CORE BUCKLING RESTRAINED BRACES IN TAIWAN -
E. Wilkins (1956)
Cumulative damage in fatigue -
Li Zi-cheng (2009)
Development and Experiential Study of Large-Tonnage Domestic TJII Buckling-Restrained BraceProgress in Steel Building Structures
-
Chun‐Lin Wang, T. Usami, J. Funayama (2012)
Improving Low-Cycle Fatigue Performance of High-Performance Buckling-Restrained Braces by Toe-Finished MethodJournal of Earthquake Engineering, 16
-
K. Karunananda, M. Ohga, R. Dissanayake, S. Siriwardane, P. Chun (2012)
New Combined High and Low-Cycle Fatigue Model to Estimate Life of Steel Bridges considering Interaction of High and Low Amplitudes LoadingsAdvances in Structural Engineering, 15
-
T. Takeuchi, Mari Ida, S. Yamada, Kazuaki Suzuki (2008)
Estimation of Cumulative Deformation Capacity of Buckling Restrained BracesJournal of Structural Engineering-asce, 134
-
Shawn Kiggins, C. Uang (2006)
Reducing residual drift of buckling-restrained braced frames as a dual systemEngineering Structures, 28
-
(2012)
Low-cycle Fatigue Performance and Seismic Demands of High-Performance Buckling-Restrained Braces -
Ebrahim Dizaj, N. Fanaie, Arash Zarifpour (2018)
Probabilistic seismic demand assessment of steel frames braced with reduced yielding segment buckling restrained bracesAdvances in Structural Engineering, 21
-
F. Freddi, E. Tubaldi, L. Ragni, A. Dall'asta (2013)
Local and Global Response Parameters in Seismic Risk Assessment of RC Frames Retrofitted by BRBs -
Luqi Xie, Jing Wu, Qing-wei Huang, Chao Tong (2019)
Analysis of the Seismic Demand of High-Performance Buckling-Restrained Braces under a Strong Earthquake and Its AftershocksAdvances in Civil Engineering
-
K. Tsai, P. Hsiao, Kung‐Juin Wang, Y. Weng, M. Lin, K. Lin, Chui-Hsin Chen, J. Lai, Sheng-Lin Lin (2008)
Pseudo‐dynamic tests of a full‐scale CFT/BRB frame—Part I: Specimen design, experiment and analysisEarthquake Engineering & Structural Dynamics, 37
- Publisher
- SAGE
- Copyright
- © The Author(s) 2021
- ISSN
- 1369-4332
- eISSN
- 2048-4011
- DOI
- 10.1177/13694332211049991
- Publisher site
- See Article on Publisher Site
Abstract
To quantitatively evaluate the low-cycle fatigue life of buckling-restrained braces (BRBs), an evaluation method for BRBs based on the combination of the CPD curves and CPD measurement meter (CMM) is established herein. The difference between two CPD curves (i.e., the CPD curves under constant strain amplitude loading history (C-CPD) and under random strain amplitude loading history (R-CPD)), and their selection criteria to evaluate the low-cycle fatigue life of BRBs are discussed. An example under the variable strain amplitude (VSA) loading history and an example under the multiple earthquakes are carried out. Finally, the CPD limit values of BRBs in the ANSI/AISC 341-10 and FEMA-450 are discussed by statistical analysis of the test results of BRBs. The analysis results show that the C-CPD curve can be used to evaluate the low-cycle fatigue life of BRBs under the VSA loading, and the R-CPD curve can be used to evaluate the low-cycle fatigue life of BRBs under the multiple earthquakes. The degree of reliability of the current CPD limit value is not enough. A CPD limit curve is recommended in this study to quantify the low-cycle fatigue performance of BRBs.
Journal
Advances in Structural Engineering – SAGE
Published: Jan 1, 2022